[Tutorial] Raspberry Pi Pico OLED Animations

[@goutammanna7350]

Your video was really helpful

[@make2explore]

Dear Goutam @goutammanna7350
*Thank you very much* for your interest in our channel and your encouragement. Glad to know you liked our content.
If you have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 [e-mail] / [e-mail]
As per time permits we will try our best to help you out.
Best Regards

[@manutube8080]

Cool video! However I can't get the screen to turn on. When I run a I2C Scanner it does detect a device at 0x3c but when running the code no image is shown. Any ideas?

[@make2explore]

Dear @manutube8080,
*Thank you very much* 🙏 for your interest in our channel.
*_Q_* - _...I can't get the screen to turn on. When I run a I2C Scanner it does detect a device at 0x3c but when running the code no image is shown. Any ideas?_
➡️ To check whether your connections are working and setup is ready, we suggest you to try running basic examples from Adafruit display library -
*_adafruit_displayio_ssd1306_*
**Also make sure you have uploaded bitmap sprite file to MCU storage
If you have any suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 [e-mail] / [e-mail]
As per time permits we will try our best to help you out.
Best Regards 🙏

[@tonypro3786]

the music was amazing! where did you get it?

[@make2explore]

Dear @tonypro3786 ,
*Thank you very much* 🙏 for your interest in our channel.
*_Q_* - _..the music was amazing! where did you get it?_
➡️ Glad to hear that you liked the music in our content. We usually use non-copyright music/sounds in our videos. You can get all the information about music sources in 🎵 *_Music Credits_* section in the description of each our RUclips video.
If you have any suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 [e-mail] / [e-mail]
As per time permits we will try our best to help you out.
Best Regards 🙏

[@NA-rh7iy]

Is it possible to do the same on a Raspberry Pi Zero w ?

[@make2explore]

Dear @NA-rh7iy,
*Thank you very much* for your interest in our channel.
*_Q_* - _Is it possible to do the same on a Raspberry Pi Zero w ?_
➡️ Yes!, you can try this tutorial on a Raspberry Pi Zero w. No changes in code/schematic. You will just need need to replace Pico with Pico W.
If you still have any queries/issues/suggestions about this Tutorial, or any of our DIY project, feel free to ping us on WhatsApp/Telegram (Links given below) for further support.
Tech support - (𝗖𝗵𝗮𝘁 𝗢𝗻𝗹𝘆) Telegram/WhatsApp - 11:00 AM - 05:00 PM (Mon-Fri) IST
🚀 𝗧𝗲𝗹𝗲𝗴𝗿𝗮𝗺 🔗 t.me/make2explore
💬 𝗪𝗵𝗮𝘁𝘀𝗔𝗽𝗽 🔗 bit.ly/3VXGGEe
📩 [e-mail] / [e-mail]
As per time permits we will try our best to help you out.
Best Regards