How to add space to your patches

Поделиться
HTML-код
  • Опубликовано: 3 авг 2024
  • The Basics of Modular Synthesis series of videos - bit.ly/modularbasics
    Buy me a coffee? :) - www.buymeacoffee.com/omricohen
    Consider joining me on Patreon - / omricohen
    Patching techniques and ideas document - bit.ly/3o1Q3Sg
    Here are some of the instruments I'm using - redir.love/thocf/n78qmvw2lm
    Here are the patches - patchstorage.com/how-to-add-s...
    Ideas with S&H - • What can you do with S...
    00:00 - Introduction
    00:28 - End of cycle
    05:48 - Bernoulli gate
    11:21 - Comparator
    18:17 - Comparator splitting voices
    22:04 - Clock dividers
    I'm using DistroKid to distribute my music to Spotify, iTunes, Apple Music, and more. By signing up through this link you will get 7% off and will support this channel - distrokid.com/vip/omri
    Consider subscribing - bit.ly/2OljOPN
    You can find all of my VCV Rack patches here - patchstorage.com/author/omri_...
    And all sorts of extra patches here - www.patreon.com/omricohen?fil...[tag]=Extra%20Patches
    You can get VCV Rack here - vcvrack.com/
    You can find all of my stuff here - linktr.ee/omri.musicohen
    Here are my computers' specs:
    - Computer: Intel Core i7-7700K CPU @ 4.20GHz, 4200 Mhz, 4 Cores,
    8 Logical Processor(s), 32Gb RAM, NVIDIA GeForce GTX 1070
    - Laptop: Intel Core i7-9700K, 8x 3.6HHz, 12MB L3 Cache, 32Gb RAM, NVIDIA RTX 2060
    Here is my case on ModularGrid:
    www.modulargrid.net/e/racks/v...
    #vcvrack #modularsynth #eurorack #synthesis
  • ВидеоклипыВидеоклипы

Комментарии • 33

  • @NICUofficial
    @NICUofficial 2 года назад +2

    Triggering the delay trail with another envelope and VCA is SO cool. that's brilliant and sounds amazing. thanks for the lesson

  • @nickcope
    @nickcope 2 года назад +5

    Very nice, especially the gated clock technique - definitely incorporating that into my generative patches.

  • @holydiver4728
    @holydiver4728 2 года назад

    Just what I needed 😎

  • @LuisTorres-qz5kr
    @LuisTorres-qz5kr 2 года назад +1

    Learning, then, so much more to learn. Thanks Omri.

    • @OmriCohen-Music
      @OmriCohen-Music  2 года назад +1

      Yes, there is so much to explore... Cheers!

  • @petersirca223
    @petersirca223 Год назад

    +1 for the "Branches else triggering delay trail" appreciation society - that is a great idea, thanks ! And using comparator to only get certain notes through delay is even better, many thanks !!

  • @GaryBarnes
    @GaryBarnes 2 года назад +1

    Another great video Omri, thank you!

  • @lifeformmusic3301
    @lifeformmusic3301 2 года назад

    Great tutorial again. Loved the vca to delay on the first vca tail tip. Thanks.

  • @gameboyz7497
    @gameboyz7497 2 года назад +1

    great video as always Omri Cohen ty very much
    soon vcv 2

  • @Jimantronic
    @Jimantronic 2 года назад

    Another great one, thankyou Omri

  • @DeepAmbientDrone
    @DeepAmbientDrone 2 года назад +3

    This is the first time I have seen that you can use the VCA before a trigger input. This was always a module for me to control the output signal of a VCO. Sometimes I build complicated constructions with switches to control clock signals, I could have just used a VCA :D. My goodness, I have to laugh at myself right now that I didn't think of this sooner. Thanks for the video Omri. It was also very pleasant to listen to the examples :)

    • @OmriCohen-Music
      @OmriCohen-Music  2 года назад +3

      Like I always say, voltage is voltage is voltage :)

  • @ernietech-101
    @ernietech-101 2 года назад

    Will try it out Omri

  • @seazenbones6945
    @seazenbones6945 2 года назад

    Enjoyed it,

  • @3DPDK
    @3DPDK 2 года назад +1

    I think we are tuned into the same "aether".
    I've been working with instrument samples and synthesizing real world instruments. A sample of high-middle C on a piano doesn't sound right if it plays a low-middle C. I've used several *comparators* and some steering logic (necessary to individually select if using more than one comparator), to trigger the 12 note range of either a Low-middle C, Middle C, or High-middle C, to use the sample for that range. As for synthesizing real world instruments, many only have a 2 octave range, but one like a tenor sax (very difficult to simulate) has a different tone and resonance in it's upper octave than it does in the lower - making the *comparator* necessary to separate or steer the raw wave through a different set of filters.
    I also have been using the IMPROMPTU GATE-SEQ-64, clocked by dividing the main clock by 32 to start and stop various "instruments" in the patch. This gives a non random control over an 8.5 minute "song" (at 120 BPM). Even if the instruments are randomly playing notes within a selected scale, the gate sequencer gives it a feeling of being "directed"
    My activities in VCV have often preceded or coincided with your videos on the same subject or technique by a day or two or three. ... weird, hu!

    • @OmriCohen-Music
      @OmriCohen-Music  2 года назад

      Oh wow, it sounds like you're deep into this :) I wish you many hours of fun!

    • @3DPDK
      @3DPDK 2 года назад

      @@OmriCohen-Music All started 35 years ago at my electronics bench. VCV is less messy and far cheaper!

  • @petermican
    @petermican 2 года назад +1

    Oh Yeah .... nice ;-)

  • @omarbrown2696
    @omarbrown2696 Год назад

    Proper

  • @jtekholm
    @jtekholm 2 года назад

    Lovely video, as usual!!! By the way, Bogaudio modules have a dark mode! Takes a bit getting used to, but at least my eyes aren't blasted with white. :D

    • @OmriCohen-Music
      @OmriCohen-Music  2 года назад

      Thanks! I will have to get used to the dark mode :)

  • @wrappeda
    @wrappeda 2 года назад +1

    Ummm. Omri, What about the "Heyyy Guyyys!"?! Can't start without that, otherwise it invalidates the whole experience!!!