We catch up with Nathan Higgins from Higgins Race Heads at Dandy Engines testing their new SB2H Chevy small block V8 cylinder heads. These are based on the NASCAR SB2.2 design architecture and performed extremely well at their first reliability session. Higgins Race Heads will be offering multiple port sizes and manifold options to customers for both street and race applications. If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button.
Dude 6,000$ for a SB2 top end kit is cheap. Around 10-12 years ago just the set of as cast a set of as cast SB2 heads no guides, no seats, literally just out of the molds was over 10,000$
People are slow today, I expected 20 comments already saying, "wHy bOtHeR, tWo K bArRa iS aLL yOu NeEd!" 😁👍 Love this motor. 850hp, no blower, all grunt. This would go absolutely sick in a sleeper looking VH Commodore. 😎
I agree. No 850hp Barra can come close to the sound of an angry N/A V8. Or match it's real world response. Not sure you could put this motor in anything and make it sound like a sleeper though. I'd know immediately not to mess with it just hearing it idle.
SB2 stands for Small Block 2nd Generation. It was designed in the late 80’s through the early 90’s. But wasn’t allowed by nascar until the 2001. (I may be wrong on that one.) you can use these heads on a stock gen one block with milling on the lifter bores.
Just to clarify the sb2 does stand for 2nd generation but its the 2nd generation Nascar engine from GM. Gm also released a generation 2 sbc LT1 in 92 that was reverse flow coolant and a opti spark on the front driven by the cam instead of a crank driven dis. I also think it was 98 that GM switched the the sb2 in nascar.
I know a couple of drag racing series with a small block no power adder class that these could totally disrupt. Has me re-thinking my current racecar build.
Scott shafiroff sells a 820 hp street motor complete for 20-23k depending on fuel injection system. He also makes a couple that make 900+ with a bit more compression.
I love listening to Australian hotrodders. "Its just a small nice street engine" 850 plus horse and 600 ft lbs NA. Hate to see what a big street motor is!
WOw great stuff, perfect for anything which has plenty of room under the bonnet, those headers are something else, i have always said that if you have the headers pointing in the same direction as the port and as long as possible before a bend, you will increase HP by at least 10 to 20% easy more on top of your off the shelf headers made by most aftermarket exhaust manufacturers, nothing against them, its just that they have to cater for all those cars which require factory clearances under the bonnet. :) Like Pacemaker, DPE, Hurricane, X force and others?
I’m in the US, do you guys make a top end kit that I could slap on a production 4 bolt main block? I don’t know anyone with the money for a Merlin block...
Have to live outside the box when it comes to making real power Normally Aspirated... not as easy as just bolting on 2 hair dryers and letting them do all the work.. lol.
Not with a 260-ish cam and a 4150 at that rpm, with that valve size and with that MCSA.. Can't compare apples to oranges, and certainly shouldn't be basing power from a cfm number..
VengeanceIzMine agree with everything you say. Didn’t argue that. But a cfm rating is a good number to judge the horsepower that an engine is capable of making with the right combination. Not judging power out of cfm. I’m well aware of the factors that will restrict a head that flows that much if not taken into consideration.
At 3:45 he says all the runners point to the centre of the carby so the distance from the valve to the carby is the shortest. Wouldn't it be shorter still (and more equal) if the inlet and exhaust valves on the end cyls were the same position as an OEM head so the pairs of inlet ports were right next to each other instead of being separate by some distance? The new setup does make for a cool looking inlet manifold though.
I think he most likely meant the straightest rather than the shortest. This head is clearly designed with the single plane carburettor intake in mind. Something like an LS is designed around emissions and injection, so not strange it is less than ideal for a single plane.
He is referring to line of site, from valve to plenum... yes, the runner lengths differ from inside to outside, that is a necessary evil on a single carb intake.. this valve arrangement and port layout (often called a mirror port design) allows for a better line of site to the valve, compared to a symmetrical or traditional lay out. Ie: straighter overall intake tract. Hope this helps..
Siamesed center exhaust isn't a huge issue, as turbos have been run successfully for many years on the typical small block Chevrolets, long before any LS came into the picture. More importantly, what I look at, is the very shallow valve angle and very small chamber size this type of head uses. Not saying it can't be done, but they definitely need a different approach to keep pistons in one piece when using Nitrous and Boost.. very timing sensitive, and controlling flame speed is critical.
@@vengeanceizmine9878 The head will be fine on boost or nitrous. What you need is a short stroke that allows for a piston with eh proper crown design, a proper compression height and a strong ring land. Alternatively a tall deck small block would work really well.
What CI is this? You solved the mystery of buying used sb heads by making a st head yourself SO many used ones need thousands of work, poor or too big of a port job etc. This engine makes almsot 150 mo tq over 7k than I make peak hp. Yes yes yes!! Can barely pay my power bill but I GOT to have this!! Goodbye T56 Hello noisy Jerico!!
SBC GOODNESS! Love me some Gen 1 sbc stuff (have a pretty nice one in my '64 MGB)(old school alum. rod, .600" lift solid roller, massively ported 492 heads) street car.ruclips.net/video/-1aewBgYKdU/видео.html
j moore It's fuckwits like you that make life worth living!!! I am genuinely thankful for your presence!!! If we didn't have people like you.... We would have nothing to talk about! !!!!! Thanks Chief!!!
Interviewer blows. Uh here son for next time. What compression. What type fuel. Options for hydraulic roller set up? Options for boosted. Most street motors ain’t seeing much over 5g rpm most of the time. Sooo what’s she make under 6100. Jesus Christ. Same old here’s a dyno number crap. Need real world shit.
Dale Ostrom ...so I'm just wondering if you use the 3.6 cross sectional area heads instead of the 2.6. And put a decent size cam 270degree plus and also give it 40 more cubes like the Ford...........I think you can safely say that it would exceed the Fords hp and torque quite easily!!! What do ya reckon??????
We catch up with Nathan Higgins from Higgins Race Heads at Dandy Engines testing their new SB2H Chevy small block V8 cylinder heads. These are based on the NASCAR SB2.2 design architecture and performed extremely well at their first reliability session. Higgins Race Heads will be offering multiple port sizes and manifold options to customers for both street and race applications.
If you’d like to be notified every time we upload a video, subscribe and then click the bell icon 🔔 next to the subscription button.
$6000 Australian dollars?
Fullboost + Nathan Higgins = Must watch immediately 🤙
Yes, bare.
What compression ratio ? Ball park if secretive please.
Dude 6,000$ for a SB2 top end kit is cheap. Around 10-12 years ago just the set of as cast a set of as cast SB2 heads no guides, no seats, literally just out of the molds was over 10,000$
When all that NASCAR take-off stuff was available, heads with Ti valves, T&D or Jesel rockers could be had for
Expect the pricing to go down even more as the EV's start to take over the roads. Less demand, equals less price, regardless of rarity....
Good grief 860hp out of a streetable, naturally aspirated small block Chevy package! That’s insane.
Over 640 ftlb speaks of the efficiency
I think the term streetable is up for debate.
People are slow today, I expected 20 comments already saying, "wHy bOtHeR, tWo K bArRa iS aLL yOu NeEd!" 😁👍
Love this motor. 850hp, no blower, all grunt. This would go absolutely sick in a sleeper looking VH Commodore. 😎
I agree. No 850hp Barra can come close to the sound of an angry N/A V8. Or match it's real world response. Not sure you could put this motor in anything and make it sound like a sleeper though. I'd know immediately not to mess with it just hearing it idle.
Plenty of steel bumper owners sat up in their seats hearing 850hp street motor on pump fuel with a carby.
Why bother, two k barra is all you need.
Memeulus plenty of na clevors out there over 1000 on pump.
Sounds mint. Carb out the bonnet wouldn't be very 'sleeper' though
Good to see local vendors doing good work and with competitive pricing too!
Needs IDA webers👌
And a top end pack for $6k aussie for that is awesome
SB2 stands for Small Block 2nd Generation. It was designed in the late 80’s through the early 90’s. But wasn’t allowed by nascar until the 2001. (I may be wrong on that one.) you can use these heads on a stock gen one block with milling on the lifter bores.
Just to clarify the sb2 does stand for 2nd generation but its the 2nd generation Nascar engine from GM. Gm also released a generation 2 sbc LT1 in 92 that was reverse flow coolant and a opti spark on the front driven by the cam instead of a crank driven dis. I also think it was 98 that GM switched the the sb2 in nascar.
I know a couple of drag racing series with a small block no power adder class that these could totally disrupt. Has me re-thinking my current racecar build.
Scott shafiroff sells a 820 hp street motor complete for 20-23k depending on fuel injection system. He also makes a couple that make 900+ with a bit more compression.
He does. The only issue I've seen is that the few I have seen tested, did not quite make the power he claims.
Great power and torque from a relatively simple combo. Go the mighty Aussies!
Fullboost is far more hardcore than any big American RUclips channel. Well done, mates!
A thing of beauty!
Id love to see a blown alcohol one! I'd happily volunteer my small block fuel altered as test mule lol
Awesome to see Aussies kicking arse. Well done Higgins. Got doubt's about the street engine comments though...
I love this , these guys are doing it Right !
Sounds absolutely stunning guys great work 👌
Those rocker covers are beautiful.
Shut up and take my money
Fucking oath nolzey!
Yeh nah yeh shes a fuggin rippa.
Mike Nolan
That sounds dirty almost 😂
Awesome aussy power at an affordable price..love the concept. .everything is ls anymore
Would be a lot of fun on the street! 🤘
Wow- that's really reasonably priced for what it is!!! Great stuff!!!
This motor with itb must sound like in heaven.
Any idea what the complete motor is worth, including carb?
Impressive power, especially at only 7500rpm!
What compression and what fuel?
Lovely good work 💪
I love listening to Australian hotrodders.
"Its just a small nice street engine"
850 plus horse and 600 ft lbs NA.
Hate to see what a big street motor is!
A 540, mechanical methanol injection and a 14-71 intake.
Damn that in my s10 blazer sbc would be great .
Nice 👍
Trying to mimic a tunnel ram with that intake and huge spacer.
WOw great stuff, perfect for anything which has plenty of room under the bonnet, those headers are something else, i have always said that if you have the headers pointing in the same direction as the port and as long as possible before a bend, you will increase HP by at least 10 to 20% easy more on top of your off the shelf headers made by most aftermarket exhaust manufacturers, nothing against them, its just that they have to cater for all those cars which require factory clearances under the bonnet. :) Like Pacemaker, DPE, Hurricane, X force and others?
6000 $AUD ? That's a good deal
Still needs about 15K in other parts.
Imagine it with a couple turbos! And about 2 bar boost!, it should be out of this world!!!
Does Higgins make an FE head for us vintage NASCAR freaks? It seems like a Cleveland could be stretched to the 4.63 bore spacing?
Dove heads if you can find them are excellent.
I’m in the US, do you guys make a top end kit that I could slap on a production 4 bolt main block? I don’t know anyone with the money for a Merlin block...
That the LS killer right there!!!
Don't tell that to the LS fanboys. Then they will say "Just add boost" or some stupid shit like that.
I'm in love
What fuel was that on?
Runs on: Hopes and dreams of small children.
"small block" with a 8x24 valve cover lol
I thought you might check this out 😂
Moat should do a sloppy sbc build 💯
Have to live outside the box when it comes to making real power Normally Aspirated... not as easy as just bolting on 2 hair dryers and letting them do all the work.. lol.
The bore spacing and block architecture is still small block
Outstanding man! How much for a good Dominator intake for a sb2.2?
Wow!
Hundrid pacent.
What compression and what fuel are you using?????
Jeeezus! Weapon
do Jesel SB2.2 rockers, and other components, intake headers ect. work on these???
Good price on the package but what would it cost to build a bottom end to handle it?
What pkg is 6k///US price 20-25k total turnkey?
Over 600 lbs even over 7k wow. IF thats entry level then Im all about it!
Insane power on the st.
Throw this in my old 3rd gen Trans Am 👍👍 Wouldn't that look nice 😁
One day...
With Pontiac valve covers
Any plans of higgins doing anything for mopar fans
Machining everything with DMGs.. you know these guys are serious.
MBE LLC 13* head flows 440 cfm of air. Can make nearly 1000hp naturally aspirated with it
Yes but these are in a different price bracket, this particular engine was merely a test mile. 👍
Not with a 260-ish cam and a 4150 at that rpm, with that valve size and with that MCSA.. Can't compare apples to oranges, and certainly shouldn't be basing power from a cfm number..
VengeanceIzMine agree with everything you say. Didn’t argue that. But a cfm rating is a good number to judge the horsepower that an engine is capable of making with the right combination. Not judging power out of cfm. I’m well aware of the factors that will restrict a head that flows that much if not taken into consideration.
It's about time 🥂👀👍🏁🏁perfact 😊🥂😊
Imagine twin s480s on this beast 🤦🏾♂️🔥
Torque Beast
At 3:45 he says all the runners point to the centre of the carby so the distance from the valve to the carby is the shortest. Wouldn't it be shorter still (and more equal) if the inlet and exhaust valves on the end cyls were the same position as an OEM head so the pairs of inlet ports were right next to each other instead of being separate by some distance? The new setup does make for a cool looking inlet manifold though.
I think he most likely meant the straightest rather than the shortest. This head is clearly designed with the single plane carburettor intake in mind. Something like an LS is designed around emissions and injection, so not strange it is less than ideal for a single plane.
He is referring to line of site, from valve to plenum... yes, the runner lengths differ from inside to outside, that is a necessary evil on a single carb intake.. this valve arrangement and port layout (often called a mirror port design) allows for a better line of site to the valve, compared to a symmetrical or traditional lay out. Ie: straighter overall intake tract. Hope this helps..
Very cool, but what compression??
Be great to see what valve train he using also for the high rpms.
High end, maybe full race crower?
Shaft rockers..
I'm confused. You say it made 864 by 7500. The dyno show 857 at 7500 and 860.9 at 8000.
Yeah that's not the same pull. We did not film every pass the engine made. That is simply the final result.
NEEDS ALL the help it can GET
I need parts for my SB2.2 small block chevy engine that I'm working on.
YESSSSSSSSS
Can those guys build me a nasty all motor Honda b series? Seems like everything that comes out of Australia is just mad!!
I need this for my s13
That would make my dart 400 sing, were does my money go?
$6k? Thought this was now $20k
If I had an sb2....I'd have "fuq yer LS" stenciled over top my windshield.
I'd have that no matter what. Now I know what to do for the weekend.
How would this package do on a twin turbo setup as far as the two center exhaust ports next to each other?
Siamesed center exhaust isn't a huge issue, as turbos have been run successfully for many years on the typical small block Chevrolets, long before any LS came into the picture. More importantly, what I look at, is the very shallow valve angle and very small chamber size this type of head uses. Not saying it can't be done, but they definitely need a different approach to keep pistons in one piece when using Nitrous and Boost.. very timing sensitive, and controlling flame speed is critical.
@@vengeanceizmine9878 The head will be fine on boost or nitrous. What you need is a short stroke that allows for a piston with eh proper crown design, a proper compression height and a strong ring land. Alternatively a tall deck small block would work really well.
Let’s see the figures under 6100 rpm !
LIKE TOO SEE THAT KIT ON A BIG INCH SMALLBLOCK AND SEE WHAT THAT KIT DOES THAN.
Apples to apples, same top end and cam on a much bigger cubic inch, will make more power, but at a lower rpm.
To think they made that HP with flat tappet cams in NASCAR.
What CI is this?
You solved the mystery of buying used sb heads by making a st head yourself
SO many used ones need thousands of work, poor or too big of a port job etc.
This engine makes almsot 150 mo tq over 7k than I make peak hp. Yes yes yes!!
Can barely pay my power bill but I GOT to have this!! Goodbye T56 Hello noisy Jerico!!
I want one.
Take my money
Hey guys freeeeking love all of your videos but what's with the "free lessons" that aren't viewable?
Not sure what you're referring to sorry?
This engine be good for a family car replacement... get rid of that tired 350 sbc cranking 200ish hp
THERE WAS NO FISH IN THE FISH TANK!!
F**k me, that's the small valve version !! Idles like a Sunday driver
This going to be available in the states?
Yes 👍
Fullboost estimated pricing?
Why spend that much on just the ports on the head when u can do the same with the regular head like that one
you cant make a normal head into an sb2 port. These are in a league of thier own
What size carb is on that engine sir?
Looking at the power and seeing that it's 4150, i'd say 950.
sr20 power
build a 6 head
the yanks got the 8s covered
cnc a RB 2J Or Barra head
nobody doing that
Holly shit.
Maybe I'm just Waco, but don't look like no sbc valve covers etc
Hmmmm that much HP out of a small block?
That oil pressure looks pretty low for the rpm
Perfectly normal.. as long as it goes up with rpm, but not too high or power suffers.
get a complete rebuilt engine off of RacingJunk for not much more than 6K
SBC GOODNESS! Love me some Gen 1 sbc stuff (have a pretty nice one in my '64 MGB)(old school alum. rod, .600" lift solid roller, massively ported 492 heads) street car.ruclips.net/video/-1aewBgYKdU/видео.html
An Aussie Cleveland trumps the Chevy
It's so hard to listen to this guy talk when he starts a new sentence halfway into the one before it.
U make me very happy fullboost.....knowing this beast made 630 torque my Ford Ranger made 600 torque @ 1400 Rpm
on an engine dyno?
😂🤣👍
Did it then go on to make 800 hp?
Give me a 5 ft rod I´ll do 830 torque @ 1rpm
j moore It's fuckwits like you that make life worth living!!! I am genuinely thankful for your presence!!! If we didn't have people like you.... We would have nothing to talk about! !!!!! Thanks Chief!!!
2020 and people still use carbies. each to their own i guess
It's a test engine nothing more. The manifolds are available in single and twin rail setup. 👍
Damian Blazevic You guessed exactly right!!!!!
That's because they make more power..
Interviewer blows. Uh here son for next time.
What compression.
What type fuel.
Options for hydraulic roller set up?
Options for boosted.
Most street motors ain’t seeing much over 5g rpm most of the time. Sooo what’s she make under 6100. Jesus Christ. Same old here’s a dyno number crap. Need real world shit.
We will be doing more detailed build vids using these parts going foward champ, don't let it ruin your day lol. 😁👍
If you want to see some REAL power, Check out the Higgins heads on a small block Windsor. Pump gas=930 HP, Race gas=980 HP.
Link?
ruclips.net/video/5Rz7paeKSOM/видео.html
@@fullboost
My initial response
👇😁👇
ruclips.net/video/NeR4qoeddbQ/видео.html
💪😁🤘
Dale Ostrom ...so I'm just wondering if you use the 3.6 cross sectional area heads instead of the 2.6. And put a decent size cam 270degree plus and also give it 40 more cubes like the Ford...........I think you can safely say that it would exceed the Fords hp and torque quite easily!!! What do ya reckon??????
@@robmotown1; It is very difficult to beat the small block Ford. They have now added compression and achieved way over 1000 hp.
(1,053 hp single carb)