How to make a fan / propeller in fusion 360 - fusion 360 tutorial
HTML-код
- Опубликовано: 1 мар 2018
- This Channel is not Monetized , Please support
Support us-
www.paypal.me/sparkplug99
hey guys in this beautiful video I will show you how to make a fan or a propeller in fusion 360.
hope you guys will enjoy the video , please comment any queries and suggestions for my future videos.
A propeller is a type of fan that transmits power by converting rotational motion into thrust. A pressure difference is produced between the forward and rear surfaces of the airfoil-shaped blade, and a fluid (such as air or water) is accelerated behind the blade. Propeller dynamics, like those of aircraft wings, can be modelled by either or both Bernoulli's principle and Newton's third law. A marine propeller of this type is sometimes colloquially known as a screw propeller or screw, however there is a different class of propellers known as cycloidal propellers - they are characterized by the higher propulsive efficiency averaging 0.72 compared to the screw propeller's average of 0.6 and the ability to throw thrust in any direction at any time. Their disadvantages are higher mechanical complexity and higher cost.
![Veeze - F.A.F (ft. Rylo Rodriguez) [Official Music Video]](http://i.ytimg.com/vi/7hlz2S2GmIY/mqdefault.jpg)
Thanks, followed every step and it turned out great.. PS for new users when you sketch the circle + 2 lines then fillet the edges to trim the blade (4:30ish) -> Make sure to trim the circle edge before this is not done here, maybe old version of Fusion
Hi - I was wondering if you could explain this further at 4:30 filleting the edges doesn't work for me because i can't select the outer edge
Sadly this is a long time ago and I haven't touched the app for a while so I don't really remember.. hope someone else can help :)
MrNixaboo no worries thought i would ask just incase! thanks anyway :)
It would be good if instead of the music there was some voiceover or at least description of what you are doing. I'm a beginner and for me this tutorial is too hard. It would be good if you could also add some information about how to model the features important in aerodynamics like the pitch, blade width and the type of aerodynamic profile applied to the blade. Without considering these basic factors, and adjusting them to the environment in which the propeller works, the propeller will be loud and inefficient.
Awesome! Had to turn off the music but was able to follow the steps easily. Printing a modified version to replace a broken ATX PSU fan propeller
I'll have to come back and do this tutorial tonight or this weekend. Always like your tutorials. Even the music hahaha. I have a new found respect for music people pick. I tried to find a royalty free song for a video and its kind of hard or maybe I'm not looking in the right location.
Thxxx brother for you support!
N specially for liking the music.😂
Okay , supporting first ;)
But can you do it without music ?
But i love watching
Everybody has different taste brother some likes videos with music and some without,
Overall a good tutorial. For future ones i would suggest not using the red dot on the mouse marker. It actually hides what you are clicking at. Voice would be nice as well. As it is now, i just have to hit mute to get rid of the very annoying music;-)
Anybody understands Path/Include thing? 1:55 both ends of the tubes are not perpendicular to the plane he selected but still managed to produce circles. 2:13 even more confusing, he deleted the circles he just created. So what's the point of using Path/Include then? 3:15 he used shortcut menu to delete that extra line created by Path/Include but it didn't disappear. Why?
i have the same problem :/
Can you also make how to animate that propeller to turn?
Hey, I am unable to select the line as a profile for the sweep at 3:28. Is there something I'm missing? Because I've triple checked what I have done and it matches this video, does a newer version of fusion put more restrictions on Sweep profiles?
Works fine for me , even in latest version I just tried it.
Seems like you are doing something wrong,
@@SPARKPLUG98 Okay, so the difference was at 3:22 when you changed the workspace from "Model" to "Patch". The newer version of Fusion has many more options, and the Sweep tool needed for this task is under the "Surface" tab rather "Solid". Great video, really helped me out but perhaps considering doing an updated version for the newer Fusion, or if you have already, then a link to it in the description. Food for thought, cheers.
@@SpunKyUniCORN thanks so much...i was stuck here
music link?
i love it lol
OK, but this is a flat blade propeller. The blades don't have a foil shape, which would make it efficient.
9 minutes, for me....50 minutes xdxdxd
This is the worst music I have ever heard in my life. But thanks for the video.
i am unable to select sketch profile at 3:31 please help me out
also stuck, did you have any luck? This is by far the worst tutorial I have seen.
in 2:36, new update edit feature button is missing, where can i find its new location?
It's there only , look again ... every feature in timeline has edit feature option
@@SPARKPLUG98 thank you I find it, but I have a question in 4:43 , how to delete left red sketch😂
I cannot do what happens at 4:45 i cant do the fillet any comment
Fillet is applied to the sketch in the top plane (confusing because the whole body is visible under the sketch). Make sure your sketch matches: quarter circle arc intersecting with 1 vertical line and 1 horizontal line both coming from the origine of the circle center. You should have a closed sketch to which you can apply the fillets ..hope this helps?
5:30 What was that mean? Why made something then just cut them????
I was wondering how the blade was drawn all the time...
Same broder
Are you guys really trying to help others or just showing how fast you can draw an object with that annoying music, sounds and other annoying noises? Please explain what you are doing and slow down....that will get you more support.
Combine error
I cannot do what happens at 4:30
@Katarzyna Plewa Yep me too thanks
This is really late and you probably already found a solution but I will leave this comment any way to help other people watchin this tutorial. All that being said I saw the little logo or icon on the cursor as they were completing this action, I looked under the sketch arrow and saw that it is the trim tool. Hope I helped and sorry for it being a late response but I am trying to start learning. Best of luck.
Change music by voice!!!,
Hard to give you a Like!
why do you choose menus fast?
Is your aim to teach or show?
If you are feeling the video is fast, you can lower the playback speed my friend. Hope this helps
@@vikramkrishna8780 Thanks :)
way to fast and annoying music shame its so nice to build this with voice help
background music is giving me cancer... use better music save lives!
Teaching without voice... Thumbs down. Lars CHRISTENSEN for example is top notch
Yes.. Agreed.. And also the official channel of Autodesk Fusion 360 where there are live streams of Brad.. That guy's work is amazing too.. This looks more like skills show-off than a tutorial with that annoying music in the background.. Beginners won't be able to follow the steps..
@@pratikpc23 I just started creating things yesterday. I had no problems following. You just have to pause it and maybe rewind a couple times.