I would love to see Garret more on the channel. His work is so incredible and has a great mind to solve things. YOU NEED THAT MAN TO WORK FOR YOU!!! Lol
Glad your posting a vid for us Trev. Old Vicegrip is still just self filming the same thing he started doing. I hope you get everything to where your happy again dude. Your content is so good because you make complicated things simple to understand. Builds are kool AF
I would think that you could get someone to create an Arduino board to output the correct 60-2 waveform in response to the ECU tach signal to keep the body control module happy in the Mustang . Don't forget that the Saab bellhousing is a GM pattern, so you can use a GM gearbox to get RWD layout with a Saab engine .
Super exciting to see this car get worked on again. Will be insane with that engine. It's funny how once again the crank signal is one of the biggest obstacles.
YES PLEASE SAAB engine in something! Also, the DI Casette is actually a really cool solution (eliminates a lot of wiring and sensors), and the Trionic ECUs are extremely tuneable. But yes, the DICs fail from time to time, especially in warmer climate it seems.
Garrett is gonna be so much happier running Saabs on the ECUMaster. Only trouble will be newer Saabs with CAN or something similar. There are ways to make all of that happy too though. Only works if people develop it!
LOL my wiring on Rotaru looked like a bowl of pasta until I cleaned it up recently too. It always worked from day 1 though! You can do anything Garrett can do, Trevor. Even if it's not quite as pretty. We all wanna see you do more of it! ;)
Been waiting for y'all to finish this thing! The 7.3 is a monster my buddy has one in a 93 ranger with simple bolt ons that made 488whp/531tq on pump E85 thing will blow the tires off through 3rd from a roll without hesitation lol they make ton's of torque
Yo trevy. I know for a fact if you give the power steering rack power and ignition signal to the the small plug green wire only the rqck will work. No need to mess with can bus. I would know im running a s550 mustang rack on my crown vic swapped 68 f100.
FIRST, of all, I've been waiting for you to work on this car for a loooooong time. Love how you keep all the stock inside working, thats how I like it too. Now brah, where da blower or turbo? coming very soon? Good ol 7875 would be good on the cheap, or a Garrett of course. This engine still gonna need more power to drift with the people you drift with. But I'm stoked for this build. Also, where the civic. I wanna see more awd, fire spitting lanches at NIGHT! I still go back at watch those from time to trime, just sick looking.
I miss these collabs. Trev needs Garrett just to refine the Trev's Customs approach bahaha. Maybe you need to move out to where Garrett is to make the magic happen 😮😉😁
@@WeekendBuilt yeah I'm guessing Trev is pretty set in his ways... but oh just imagine how good it could be. He needs your focus and a little nudge here and there 🤣😂
I’m personally not a fan of the mustang build .. would love to see an s13 couple drift build maybe some of those complete rebuilds for the channel. Build another k swap car , mustang content isn’t it
I've been missing my favorite channel. Let's smash that like button people.
I would love to see Garret more on the channel. His work is so incredible and has a great mind to solve things. YOU NEED THAT MAN TO WORK FOR YOU!!! Lol
Finally, I get to see progress on the Mustang. Mustang is a dream car for me.
HEY MAN CAN YOU PLEASE DO A VIDEO ON HOW TO BUILD A CHEAP NA T JZ ON A BUDGET? I know I would appreciate it along with others
Glad your posting a vid for us Trev. Old Vicegrip is still just self filming the same thing he started doing. I hope you get everything to where your happy again dude. Your content is so good because you make complicated things simple to understand. Builds are kool AF
I would think that you could get someone to create an Arduino board to output the correct 60-2 waveform in response to the ECU tach signal to keep the body control module happy in the Mustang . Don't forget that the Saab bellhousing is a GM pattern, so you can use a GM gearbox to get RWD layout with a Saab engine .
"The Brain Garret has in there, works good" 😂 20:51
Super exciting to see this car get worked on again. Will be insane with that engine. It's funny how once again the crank signal is one of the biggest obstacles.
YES PLEASE SAAB engine in something! Also, the DI Casette is actually a really cool solution (eliminates a lot of wiring and sensors), and the Trionic ECUs are extremely tuneable. But yes, the DICs fail from time to time, especially in warmer climate it seems.
And then we can drive it !
Garrett is gonna be so much happier running Saabs on the ECUMaster. Only trouble will be newer Saabs with CAN or something similar. There are ways to make all of that happy too though. Only works if people develop it!
everyday I look.. everyday I wait.. but today Trevie posts. 🎉
Garrett is such a great dude!
Friggin stoked for this build. It sounds amazing.
I want to see more on that mk3
LOL my wiring on Rotaru looked like a bowl of pasta until I cleaned it up recently too. It always worked from day 1 though! You can do anything Garrett can do, Trevor. Even if it's not quite as pretty. We all wanna see you do more of it! ;)
Yessssss! Love this project!
me too!
so stoked on this build
Nice to see the mustang back again
Been waiting for y'all to finish this thing! The 7.3 is a monster my buddy has one in a 93 ranger with simple bolt ons that made 488whp/531tq on pump E85 thing will blow the tires off through 3rd from a roll without hesitation lol they make ton's of torque
Casually has that maroon mustang in the end clip… what’s the secret trevie?
I ran it on the dyno for a buddy while Lund tuned it remotely.
This is all epic info I picked up v6 s550 for cheap need to decide what motor I want to do for next year pro-am
Garret is the man
love to see the progress on this swap
I’m impressed with how concentric the trigger wheel turned out!
I see trevie customs, i upvote. Good to see you buddy.
Yo trevy. I know for a fact if you give the power steering rack power and ignition signal to the the small plug green wire only the rqck will work.
No need to mess with can bus. I would know im running a s550 mustang rack on my crown vic swapped 68 f100.
Thanks!
Thank you!
Definitely sounds like every other mustang. To damn loud but this one’s gonna be a torque monster.
it is REALLY loud
FIRST, of all, I've been waiting for you to work on this car for a loooooong time. Love how you keep all the stock inside working, thats how I like it too. Now brah, where da blower or turbo? coming very soon? Good ol 7875 would be good on the cheap, or a Garrett of course. This engine still gonna need more power to drift with the people you drift with. But I'm stoked for this build. Also, where the civic. I wanna see more awd, fire spitting lanches at NIGHT! I still go back at watch those from time to trime, just sick looking.
Sounds amazing
Sounds mean af!
MSD tach driver will work it uses the power wire that goes to the coils packs and turns it into a tach signal.
Gotta love a good ole OHV v8. Can’t get a lope like that on a DOHC v8.
im sorry, im a chevy man, but ford won the game with the godzilla
Can't wait to listen to this thing sing on track melting tires
Garett WOOOOOOOOOOOOOOOO
I miss these collabs. Trev needs Garrett just to refine the Trev's Customs approach bahaha. Maybe you need to move out to where Garrett is to make the magic happen 😮😉😁
I’ve been trying all year. That’s a tall order, though.
I also miss sean... last time we saw him he was looking kind of rough
You need a helicopter or a cabin cub like cleetus
@@WeekendBuilt yeah I'm guessing Trev is pretty set in his ways... but oh just imagine how good it could be. He needs your focus and a little nudge here and there 🤣😂
now that is some chop
What's going on with the mk3 supra
I think you can use forscan to tell the bcm its a manual so you don't get that error on start up?
That thing sounds nastyyy
yay, more of the builds. I don't care for you vlog channel.
8.8k vues and 891 likes 🤔
I dont understand. 🤷
This man his working a lot and YOU juste have to make a litle "click"..... SO DO IT ....
Sheeeeesh
We need more videos 🤙
did you try increasing the pulse count when doing the tach output from the holley?
I was wearing my motion auto turbo o's shirt today trying to rep for trev
Appreciate it!
What about the interior swap on your new truck ?
Coming soon!
Still havent started working on it yet
U should have put it back on crank so rev counter reads rite
Wasn’t as nice of an area to mount it, crank pully was bigger then the trigger wheel
I’m personally not a fan of the mustang build .. would love to see an s13 couple drift build maybe some of those complete rebuilds for the channel. Build another k swap car , mustang content isn’t it
Wait why didnt yall put it on the crank pulley?
Wouldn’t fit
Kool video 😊
Thanks!
Bruh
Yes
"And then...... we can drive it" :)
We’re stealing garret for the betterment of the east coast sorry trev 😔
That viggen makes me ashamed of my combi 😩
Haha. There’s always a process to every end goal.
Dude where the EFF you been?
Fipsin
Wait, you still do RUclips? lol
Once in a while
Clicked comments realized I was the first one… mildly depressed
Why?
@@MotionAutoTvhe’s depressed because he’s third and not first, like what he hoped he was.
Oh half the fun is reading the comments of people who love the projects as much as me lol
24 minutes talking....1 minute working....negative ratio, not good.
The biggest problem is it's a ford!
- 👍 👍 🔧 qoᒋ ǝɔᴉN 👀❤🤍💙
6:00 um didnt Rawlings drive off ALL his goid mechanics and his viewers? I guess Trevvy is half way...
hey now