Metal complex I want to thank you from the bottom of my heart for being one of the few knife reviewers that doesnt have an annoying voice. It is much appreciated! 👍
Late to the AD15 party here. Just picked one up for a price I just couldn’t pass on. Holy Crap... what a beast of a knife. Two small nicks to finger tips later, and I’m hooked. Watching your closing method made the difference. Now I can easily open and close one handed. Thanks MC!
I’ve got one coming this week. I’ve already got a set of those natural Micarta scales for it, I carry my 4 maxx occasionally so a big knife means nothing.. this knife with a few vision mods “DIY” style…. Would look truly custom Also did you see that Lynn actually took Andrew’s actual ad15! And traced out all the pieces, so this is essentially a to scale model of his actual custom, and for a while Cold steel had a very consistent heat treat! I’m I’ve been all about customizing my blades lately or buying knives I can modify
Just got this one, and I love it. Very stiff out of box, but very smooth action after break in. Now just $150... Great hard use companion to my 4Max Scout, now just $70!
I bought mine from the first run , and it only took a few days of playing with it before I got it running like an axis lock , now the blade drops like guillotine because of the weight , I love it .... Also I find it easier to operate the lock bar from the top , near the pivot .
I sure like mine. Have tried the different ways to open and close it that the different reviewers show, and now just pinch it to open and close it with one hand. Everybody will end up using their favorite method, arthritis says how I do it. At first, I wished it had bearings, but now through several thousand operations, it has gotten ultra smooth, I don`t think bearings could improve on it. Mine is the Lite version and I am never going to notice the difference in the steel or the handle material. About 90 bucks from Amazon and well worth that.
Just scored a LNIB one for $117 off EBay. It was a little tight, but with just a micro adjustment of the pivot it fires great now from stud. Took 2/3 of one coil off the spring and the yoke is even better now. One-handed operation, awesome knife!
Thanks for doing this video. You are right about having to get used to the Scorpion Lock, and needing to be careful due to the heavy blade. Check out several videos done by Andrew Demko and you will see how easily it can be manipulated. In the first day I had mine, I was able to easily get it to deploy by flipping it and Spydie flicking it. Also, it easily drops shut and the strong detent sucks it closed when the yoke is lifted. Once you get the hang if it, it is easy to lift the yoke with one hand and using the same hand close the blade with your thumb. I really like that these same moves can be done with whichever is your non-dominant hand.
That scorpion lock is as fidget friendly as an axis lock once you get used to it. I sit here while driving and flip the hell outta that beast all day :)
These were $160 about 3 weeks ago. I don’t remember which dealer it was, but I remember it specifically because I came very near to buying it. I was wanting a Cold Steel because I didn’t have one and this one peaked my interest. But I also wanted something in CTS-XHP to try. So, I wound up finding a Code 4 with XHP on some obscure website that was basically half the price so I went with it instead. If I’d of known that the price on these were gonna shoot up $40 I’d of probably gotten it instead, and like I said, I just nearly did. But, somewhat surprisingly, I’m very happy with the Code 4 I got so don’t guess I can really complain too much.
Oh they certainly did raise the price it was $150 when they first came out now they are $202. I lucked out and got in on a Massdrop run right when they came out so I got mine for $130, and now I don’t want to sell it because if I changed my mind, I don’t want to pay that new price. But it is a fun knife
Amazon has the AD-15 in S35VN at $135.00. Looks to be legit. I ordered one and will have it shortly. Blade HQ and Knife Center $215. FYI. Thanks for the video 😎👍
Nice! The only thing I have against Cold Steel is the deployment is never an easy one with one hand you have to use two! That’s why I never carry my Cold Steel knives as for that pocket catch flip open that doesn’t always work!
I bought mine at BladeHQ, when it was first announced, for $159. Now it's listed at $202.49. That's quite a hike. The only thing that I don't like about this knife is the grippy scale area under the clip. It's going to tear up your pocket. I'm hoping that there will be optional scales available in the future.
It's not the knife...its where you are buying from. BHQ is over the top with price, tax & shipping. I just picked one up at WMK (2/8/22) for $144, regular price.
Thats a good point. If it got dinged up it would probably cause a bit of grittyness in the action as the blade rotates against the lock pin. Fortunately if it was that bad you could probably just sand down any rough spots without negatively affecting the action or function.
I should mention, the Scorpion lock can be lifted maybe an 8th of an inch off the tang of the blade and the lock doesn't press down terribly hard against the tang.
Was setting stands and didnt have a saw with, had this thing in my pocket so i limbed the trees with it, the blade still locks solid and the action somhow got smoother lol
Small price hikes are normal and acceptable, and I just bought this knife at White Mountain Knives for $144. Its not the knife.... its where you are buying or pricing it from. Spyderco, on the other hand, is unquestionably greed motivated. When the Shaman first came out, it was the same price as this knife ~160. Now the Shaman is $250+ Just ridiculous!
If you ever want to see something similar check out the CRKT Nirk Tighe. I have one and no matter how much you think you might accidentally unlock it, it just doesn't want to.
I reverse flick mine better and more consistently than thumb flicking . The only thing I'm having trouble really getting used to is the traction on the scales 😬
They are looking around 170-190.. but look good. I love my american lawman so much I know it's good or better but no real need to move up that little guy is fucking great.
I know this is a late reply but I couldn't resist what I'm about to say. This is Cold Steel and AD we are talking about, you are more likely to see a Large and XL version come out before you see a small one lol. AD-35 XL folding Katana,
that lock is not reliable! it's ok for most use scenarios, unless you want to stab something while holding the blade upside down, in which case the force the is acting on the blade, trying to close it, also takes away from the pressure your fist is applying! and 8f you look at the notch, the side preventing the blade from closing is both, slightly lower and ever so slightly angled away from the side closer to the blade. it actually doesn't take much effort to force the blade closed when not gripping. cool knife, but i don't trust the lock
@@nick-wi6et well to be honest i have a clone. seems very high quality though. it unlocks easily if no pressure is being applied and the angle of the notch merely existing, combined with the large radius of the locking pin and the amount of travel needed to unlock, just doesn't make it totally secure.
Cold steel folders just never were appealing to me, not saying that they are made poorly, or designed mechanically bad , just not a first choice for me ever . I do have several of their older fixed blade models that preform great, never liked the looks of their folders..... still don't. Great review though.
Different strokes. I find cold steel to be very well made and a great choice for heavy duty use. Most of their models are competitively priced as well. The ones I've gotten have always been super sharp out of the box. As far as aesthetics, I think the Code 4 is a very attractive piece. And the triad lock is as strong a lock as you'll find in a folder. If I could only have one knife, the Recon one would be right up there.
I think the satin blade Cold Steel recon 1 clip point and spear points are some of the best looking knives around. Great traditional blade shapes, functional, built amazingly well.
It's the scorpion lock.
Thank you!
Metal complex I want to thank you from the bottom of my heart for being one of the few knife reviewers that doesnt have an annoying voice. It is much appreciated! 👍
The faster you can deploy a knife in a box-opening situation, the more office cred you earn.
Lol 🤣
Me to box... "keep your flaps where I can see'em"
I cannot deploy the knife with one hand
@DrewsReviews07 it has a thumb stud? If your talking about disengaging you probably need to have stronger fingers to do it easily
Late to the AD15 party here. Just picked one up for a price I just couldn’t pass on. Holy Crap... what a beast of a knife. Two small nicks to finger tips later, and I’m hooked. Watching your closing method made the difference. Now I can easily open and close one handed. Thanks MC!
I’ve got one coming this week. I’ve already got a set of those natural Micarta scales for it, I carry my 4 maxx occasionally so a big knife means nothing.. this knife with a few vision mods “DIY” style…. Would look truly custom
Also did you see that Lynn actually took Andrew’s actual ad15! And traced out all the pieces, so this is essentially a to scale model of his actual custom, and for a while Cold steel had a very consistent heat treat! I’m I’ve been all about customizing my blades lately or buying knives I can modify
Just got this one, and I love it. Very stiff out of box, but very smooth action after break in. Now just $150... Great hard use companion to my 4Max Scout, now just $70!
I bought mine from the first run , and it only took a few days of playing with it before I got it running like an axis lock , now the blade drops like guillotine because of the weight , I love it .... Also I find it easier to operate the lock bar from the top , near the pivot .
How much did it cost then, if you remember? There are some on amazon for a really good price and people have all said they are authentic. I’m curious.
@@MaFiaMediaHD --- I think I paid $165.00 . They are still $165.00 on Amazon , the last time I checked...
I sure like mine. Have tried the different ways to open and close it that the different reviewers show, and now just pinch it to open and close it with one hand. Everybody will end up using their favorite method, arthritis says how I do it. At first, I wished it had bearings, but now through several thousand operations, it has gotten ultra smooth, I don`t think bearings could improve on it. Mine is the Lite version and I am never going to notice the difference in the steel or the handle material. About 90 bucks from Amazon and well worth that.
Just a heads up, they raised the price over $50. I got mine for less than $150 from knife center when it first released.
Just scored a LNIB one for $117 off EBay. It was a little tight, but with just a micro adjustment of the pivot it fires great now from stud. Took 2/3 of one coil off the spring and the yoke is even better now. One-handed operation, awesome knife!
Thanks for doing this video. You are right about having to get used to the Scorpion Lock, and needing to be careful due to the heavy blade. Check out several videos done by Andrew Demko and you will see how easily it can be manipulated. In the first day I had mine, I was able to easily get it to deploy by flipping it and Spydie flicking it. Also, it easily drops shut and the strong detent sucks it closed when the yoke is lifted. Once you get the hang if it, it is easy to lift the yoke with one hand and using the same hand close the blade with your thumb. I really like that these same moves can be done with whichever is your non-dominant hand.
I just picked up the black version on Amazon today for $88. I feel like I got a good deal
I love mine . I took mine apart and beveled all of the sharp corners and polished them . I think it is a necessary treatment for this knife .
That scorpion lock is as fidget friendly as an axis lock once you get used to it. I sit here while driving and flip the hell outta that beast all day :)
These were $160 about 3 weeks ago. I don’t remember which dealer it was, but I remember it specifically because I came very near to buying it. I was wanting a Cold Steel because I didn’t have one and this one peaked my interest. But I also wanted something in CTS-XHP to try. So, I wound up finding a Code 4 with XHP on some obscure website that was basically half the price so I went with it instead. If I’d of known that the price on these were gonna shoot up $40 I’d of probably gotten it instead, and like I said, I just nearly did. But, somewhat surprisingly, I’m very happy with the Code 4 I got so don’t guess I can really complain too much.
They're 136 on amazon from cold steel rightnow
Oh they certainly did raise the price it was $150 when they first came out now they are $202. I lucked out and got in on a Massdrop run right when they came out so I got mine for $130, and now I don’t want to sell it because if I changed my mind, I don’t want to pay that new price. But it is a fun knife
Amazon has the AD-15 in S35VN at $135.00. Looks to be legit. I ordered one and will have it shortly. Blade HQ and Knife Center $215. FYI. Thanks for the video 😎👍
They were around $130 when they first dropped. Then they raised the price on them. I just ordered one, it will be my first CS
@@edcko10 The seller is Amazon, LLC. Close to Zero chance of the knife being counterfeit.
@@barkingspider2007 yessir! I'm excited. Thanks for the heads up!
Nice! The only thing I have against Cold Steel is the deployment is never an easy one with one hand you have to use two! That’s why I never carry my Cold Steel knives as for that pocket catch flip open that doesn’t always work!
Did you forget the 4 max? For hard use beast of a knife
With big knives comes big responsibilities
Got one on the way now should be at my front door by noon tomorrow 😁
I got a snaggletooth wave system on mine. Love this knife even more now lol. Got mine on Amazon for 165.99 for the black one. I think it's worth it
I bought mine at BladeHQ, when it was first announced, for $159. Now it's listed at $202.49. That's quite a hike. The only thing that I don't like about this knife is the grippy scale area under the clip. It's going to tear up your pocket. I'm hoping that there will be optional scales available in the future.
It's not the knife...its where you are buying from. BHQ is over the top with price, tax & shipping. I just picked one up at WMK (2/8/22) for $144, regular price.
what is your ad 15 difficult to thumb flick? I just got mine in the mail and it feels rather difficult
Do you like the black or green one better?
In 2021 this is back down to 138 on amazon!
My biggest fear with the AD15 is if you drop it on that exposed tang and ding it, how will that affect the action?
Thats a good point. If it got dinged up it would probably cause a bit of grittyness in the action as the blade rotates against the lock pin. Fortunately if it was that bad you could probably just sand down any rough spots without negatively affecting the action or function.
I should mention, the Scorpion lock can be lifted maybe an 8th of an inch off the tang of the blade and the lock doesn't press down terribly hard against the tang.
I ended selling mine because I prefer the ad10 a lot more and the 4 max.
Metal Complex: "Andrew Demko, *WANTS* to hurt you!"
😁
🤣
Is it a mandatory to reference Benchmade griptilian when showing Ritter hogue?
Yes, so the guy sitting at home with a Griptilian knows it’s the same size as the Ritter Hogue.
VOID VISIONARY it’s not though
Yes
Was setting stands and didnt have a saw with, had this thing in my pocket so i limbed the trees with it, the blade still locks solid and the action somhow got smoother lol
I want one so bad but I don’t want to spend $200+ 😫 great video man!
Small price hikes are normal and acceptable, and I just bought this knife at White Mountain Knives for $144. Its not the knife.... its where you are buying or pricing it from. Spyderco, on the other hand, is unquestionably greed motivated. When the Shaman first came out, it was the same price as this knife ~160. Now the Shaman is $250+ Just ridiculous!
you should try the buck marksman. i love the lock on it
Cold Steel needs green with black and black with black models. I just got one with black grips
Thanks for the review.
If you ever want to see something similar check out the CRKT Nirk Tighe. I have one and no matter how much you think you might accidentally unlock it, it just doesn't want to.
They also hiked the price of the AD10 as well from first run.
I reverse flick mine better and more consistently than thumb flicking . The only thing I'm having trouble really getting used to is the traction on the scales 😬
Great looking knife 👍
Is that a clone? The scorpion lock is different color(gun metal gray instead of tan).
No. The scorpion lock has come in different colors. You can easily find examples on Google at major retailers.
Shabazz and slicy's were both tan I was curious as well hahah
Is that tape measure from the 70's? That's a keeper. Don't know if the new mousetrap lock on this knife is necessary.
80's 😁👍
Who knows how much custom costs? And where to find them?
I carry a buck 110 and cut open my straw wrapper paper with it
Wow. $202? I got mine for $149. Maybe they’ll come down when demand does.
They are looking around 170-190.. but look good. I love my american lawman so much I know it's good or better but no real need to move up that little guy is fucking great.
This is the knife I won from the fundraiser!
8.6 inches? 8.3 inches?
Scorpion lock for ad15
Another interesting lock. I would like to see a smaller version.
Nahh it wouldn't be a Demko design if it were small !
I know this is a late reply but I couldn't resist what I'm about to say. This is Cold Steel and AD we are talking about, you are more likely to see a Large and XL version come out before you see a small one lol. AD-35 XL folding Katana,
that lock is not reliable! it's ok for most use scenarios, unless you want to stab something while holding the blade upside down, in which case the force the is acting on the blade, trying to close it, also takes away from the pressure your fist is applying! and 8f you look at the notch, the side preventing the blade from closing is both, slightly lower and ever so slightly angled away from the side closer to the blade. it actually doesn't take much effort to force the blade closed when not gripping. cool knife, but i don't trust the lock
do you think its unreliable from looking at it or do you know from experience?
who stabs holding a blade upside down?
@@nick-wi6et well to be honest i have a clone. seems very high quality though. it unlocks easily if no pressure is being applied and the angle of the notch merely existing, combined with the large radius of the locking pin and the amount of travel needed to unlock, just doesn't make it totally secure.
Fuuuck wheres my stimmy check!
A10 better, Medford pay attention
Cold steel folders just never were appealing to me, not saying that they are made poorly, or designed mechanically bad , just not a first choice for me ever . I do have several of their older fixed blade models that preform great, never liked the looks of their folders..... still don't. Great review though.
Different strokes. I find cold steel to be very well made and a great choice for heavy duty use. Most of their models are competitively priced as well. The ones I've gotten have always been super sharp out of the box. As far as aesthetics, I think the Code 4 is a very attractive piece. And the triad lock is as strong a lock as you'll find in a folder. If I could only have one knife, the Recon one would be right up there.
I think the satin blade Cold Steel recon 1 clip point and spear points are some of the best looking knives around. Great traditional blade shapes, functional, built amazingly well.