Long form is great for learning. I love watching your videos to improve my own soldering and seeing how you detail cleaning/soldering the more tricky points that often aren't included in the short form is really useful. Especially useful to see how you manage the more 'fiddly' parts of soldering... the perfect amount of fiddle :-| to get the soldering done. Excellent videos!
Thanks for your comment. This is exactly why we are uploading these longer form videos. There is a section of our audience that wants to learn and isn't there for the entertainment as much as. lot of other people are so that's who these long form videos are for.
I agree there are times when the "carry method" of applying solder is best, but when doing many pins on a flat surface, I find the direct application of solder while soldering superior.
You made that first GBC way harder than it needed to be. Go check out Joey Does Tech, that dude is a wizard with electronics A pick tool is not the proper tool to remove corrosion...and dry battery acid IS corrosion. Go to an O'Reilly Auto Parts and ask for a couple sheets of red scotch brite. That's what you want to use to get corrosion off because it doesnt damage like a pick tool does
i bought that bitset today, holy crap its amazing. the magnetic cover is amazing I used it the way you do before I even saw this haha, plus the corner magnets kinda keepem all together. That bit set is absolutely top 3 buys for myself ever.
really great to see these long form videos, they are awesome! I love to see how's done, really inspirational. Even the unfixable one! It was great going all the way till it was not possible anymore
Enjoying the long vids, definitely something you need to advertise on your other channel Also would be nice to see you doing some plating of contacts etc for some of these in the future
For your second GBC I have seen it to where the ribbon cable just needs lightly reflowed to the back of the screen. That might be the issue. But doing that you have to be extremely careful doing that. Because its so easy to melt the ribbon cable. Honestly if I had a chance to take a crack at fixing GBC id take it because I think it would be worth fixing with an original screen.
@the_blue_gamer Genuine question since I am trying to learn how to diagnose issues and want to learn from more experienced people. Since he replaced the board but kept the original screen and ribbon cable, and it then worked, doesn't that rule out the need to reflow the ribbon cable? Which meant their was an issue with the board like maybe the corroded capacitors?
@@gavinbeck2949 that is certainly possible. It could have even been a possible broken trace as well. Which in that case... It just depends on how far you honestly want to chase things and how much time you want to spend on something.
@@gavinbeck2949 And I have seen come circumstances where it was also both where the corroded capacitor was so bad it had eaten away the copper traces which can be tricky and some work.
@@the_blue_gamer For the copper traces, do you just have to check the continuity on each one to find the issue? And I guess if you find a bad trace, what even is the fix?
I can smell the apple cider vinegar from here, LOL. I've used that on electronics before, as long as you dry it really well and make sure there's no excess, there shouldn't be any issues!
Watchin u struggle with those speaker wires gave me bad flashbacks, just unsolder at the speaker and use the original wires so u dont have to fuss with em
That's my current Gameboy. Just cleaned it up, and had to buy a new battery case cause i seemed to have misplaced it. Definitely around. The new battery cover is just ever so slightly a different blue. Absolutely tormenting.
The iFixit pro toolkit is excellent, apart from 1x thing. The foam that holds the bits has identifying mark printed in black. For selecting the correct bit these marking need to be in a colour that is not black.
Nice video been seeing a lot of your videos and have learned tons of thing. but I have a challenge for you. I have an OG Xbox modded that I have tried to use but for some reason it does not work anymore. it turns on and off then repeats itself a few more times than it gives me the green/ red blinking lights. I send it in once and they could figure out or fix the issue. you think you can fit it?
when using the wick, put your soldering iron tip a few millimeters down the wick away from the pin. solder is drawn to the heat and will flow in that direction
This. And please don’t force any soldered parts from the board when heating pads. The second gameboy motherboard has some destroyed pads due to the removal of the cartridge slot. The pads are still attached to the cartridge slot pins, which renders the board useless, unless you’re fixing them. As for the via’s with corrosion: get a tiny diameter drill bit and manually (and gently) drill those via’s. Afterwards, you should be able to flow some solder through the holes. If you’re lucky, the holes are still bearing copper, which can be flowed with some fresh solder. If not, just scrape away some of the surrounding solder mask and use a thin wire to make the solder find its way through the via’s, bridging their respective traces. Also, investing in a desoldering gun is a very effective method to not get those pads and traces ripped off the board. Use loads of flux to be sure. :)
Someone gave me an Nintendo Gameboy DMG. I turned it on and it didn’t work. I opened it up and it was super clean! No corrosion or whatsoever. I just cleaned everything with 99% alcohol and it worked again.
Why don't you have one of those Hakko desoldering guns? Doing any extensive through hole component work without one is a pain. Also adding fresh soldier first helps since what's on the board is probably decades old.
God I miss the Pokémon GBC. I had that exact model, same lens variant, played the crap out of it. What happened to it, ohh I only SOLD IT AT A YARD SALE FML. This was centuries ago sooo I don’t remember how much I sold it for, but you can rest assured it was probably a stupid low price..
I think I'd have done an IPS Screen and LiPo mod on the first one. Better screen, longer battery life and you don't need the DC/DC board anymore :D Of course the GBC isn't "original" anymore, then.
Do you ever give a run down of the final costs? I know you said how much you paid for them on ebay, but how much are those replacement parts? Just curious. Thanks.
I have fixed a lot of them. Sometimes this is just a problem with the fpc connector of the screens flat cable. I scrape it with fine sandpaper carefully and voila!
I've not fixed that specific problem but you should be able to create some jumpers from the board to the speaker. It does take some soldering skills though
I have a desoldering iron and use it when I feel that it's the best tool for the job. Solder suckers work great if you know how to use them and wick also works great when you have a feel for how to use it effectively.
Long form is great for learning. I love watching your videos to improve my own soldering and seeing how you detail cleaning/soldering the more tricky points that often aren't included in the short form is really useful. Especially useful to see how you manage the more 'fiddly' parts of soldering... the perfect amount of fiddle :-| to get the soldering done. Excellent videos!
Thanks for your comment. This is exactly why we are uploading these longer form videos. There is a section of our audience that wants to learn and isn't there for the entertainment as much as. lot of other people are so that's who these long form videos are for.
These longer videos remind me so much of Adam Savage's TESTED videos. I love these. Keep'em coming please!
So glad you're enjoying them! We'll keep publishing them if people keep watching!
Adam savage is so amazing! I’d loved to have seen tronicsfix on mythbusters!!!
These long videos are brilliant. My prayers have been answered. Thank you.
On the 2nd GBC, the original board needs new electrolythic capacitors, in order for the display to work.
I agree there are times when the "carry method" of applying solder is best, but when doing many pins on a flat surface, I find the direct application of solder while soldering superior.
You made that first GBC way harder than it needed to be. Go check out Joey Does Tech, that dude is a wizard with electronics
A pick tool is not the proper tool to remove corrosion...and dry battery acid IS corrosion.
Go to an O'Reilly Auto Parts and ask for a couple sheets of red scotch brite. That's what you want to use to get corrosion off because it doesnt damage like a pick tool does
i bought that bitset today, holy crap its amazing. the magnetic cover is amazing I used it the way you do before I even saw this haha, plus the corner magnets kinda keepem all together. That bit set is absolutely top 3 buys for myself ever.
This is my new favorite repair Channel. Replacing TronicsFix (I don't know if you've heard of it)
Is this a compilation of earlier work? Your soldering skills are way better than what I've seen at least 1/3 through the video! Love the channel!
No compilation...just much longer cuts of our main channel vids.
the stainless steel solder sucker works wonders. ive been using that same one for a year now and i love it
Yes! They are awesome.
Thank you for extended cut videos I'm loving the content like this!
How did I not know about this channel!! An hour long repair video?! Sweet!
Always post extended versions!! I love it!!!
If people watch them and want more we'll keep uploading them!
Love this new format. Keep it up.
52:15 great job with cleaning up the dirty flux residue, Steve.
Hey thanks!
really great to see these long form videos, they are awesome! I love to see how's done, really inspirational. Even the unfixable one! It was great going all the way till it was not possible anymore
Master yoda you need foam cue tips they stop that fur being on board making things easier to clean
Didn't know I needed this kind of ASMR in my day. Nice when sitting in the office doing other work.
Enjoying the long vids, definitely something you need to advertise on your other channel
Also would be nice to see you doing some plating of contacts etc for some of these in the future
My favourite thing to do is smoke weed and watch your videos on the couch til i fall asleep ahh they are so soothing haha😂❤
For your second GBC I have seen it to where the ribbon cable just needs lightly reflowed to the back of the screen. That might be the issue. But doing that you have to be extremely careful doing that. Because its so easy to melt the ribbon cable. Honestly if I had a chance to take a crack at fixing GBC id take it because I think it would be worth fixing with an original screen.
this, he didnt even check the screen
@the_blue_gamer Genuine question since I am trying to learn how to diagnose issues and want to learn from more experienced people. Since he replaced the board but kept the original screen and ribbon cable, and it then worked, doesn't that rule out the need to reflow the ribbon cable? Which meant their was an issue with the board like maybe the corroded capacitors?
@@gavinbeck2949 that is certainly possible. It could have even been a possible broken trace as well. Which in that case... It just depends on how far you honestly want to chase things and how much time you want to spend on something.
@@gavinbeck2949 And I have seen come circumstances where it was also both where the corroded capacitor was so bad it had eaten away the copper traces which can be tricky and some work.
@@the_blue_gamer For the copper traces, do you just have to check the continuity on each one to find the issue? And I guess if you find a bad trace, what even is the fix?
I can smell the apple cider vinegar from here, LOL. I've used that on electronics before, as long as you dry it really well and make sure there's no excess, there shouldn't be any issues!
Watchin u struggle with those speaker wires gave me bad flashbacks, just unsolder at the speaker and use the original wires so u dont have to fuss with em
Great video, I couldn't do any of this type of stuff but I love watching fix it/restoration videos. Apple Cider vinegar to the rescue!
The perfect amount of content :) Good job on the repairs!! You should do a revisit on the second gameboy board.
Glad you're enjoying these longer videos. I might have to revisit that board at some point.
legend, hes the dentist of electronics!
That's my current Gameboy. Just cleaned it up, and had to buy a new battery case cause i seemed to have misplaced it. Definitely around.
The new battery cover is just ever so slightly a different blue. Absolutely tormenting.
It's really hard to find matching battery covers for these. When I buy them for projects I always try to buy them with battery covers.
Can’t wait to see the video on the water damaged gameboy
Very eager to see the fix of the 4th one (no link on screen I guess is because the video is not out yet)
41:23 never realized they fanned out the address and databus. Also maybe a quick ultrasonic bath for all the little holes?
The iFixit pro toolkit is excellent, apart from 1x thing. The foam that holds the bits has identifying mark printed in black. For selecting the correct bit these marking need to be in a colour that is not black.
yea they just etched them into the foam. although i will say ive had kits with NO markings so this was a huge improvement for me
You would have thought I was an obvious thing to do. It’s a case of companies designing products and never using them.
These videos is so relaxing, loving it:)
My suggestion for your heat gun, is an heat gun attachment to better focus the heat in the only needed areas, if you want I can get you some.
this looks really hard core. thank you!
Nice video been seeing a lot of your videos and have learned tons of thing. but I have a challenge for you. I have an OG Xbox modded that I have tried to use but for some reason it does not work anymore. it turns on and off then repeats itself a few more times than it gives me the green/ red blinking lights. I send it in once and they could figure out or fix the issue. you think you can fit it?
You need better cotton swabs. I would recommend glob mobs. They aren't stringy and hold up really well. Regular ones fall apart too easily.
Yess i love the longer videos 🎉🎉
So glad you like them!
Love the long videos - thank you!
when using the wick, put your soldering iron tip a few millimeters down the wick away from the pin. solder is drawn to the heat and will flow in that direction
This. And please don’t force any soldered parts from the board when heating pads. The second gameboy motherboard has some destroyed pads due to the removal of the cartridge slot. The pads are still attached to the cartridge slot pins, which renders the board useless, unless you’re fixing them. As for the via’s with corrosion: get a tiny diameter drill bit and manually (and gently) drill those via’s. Afterwards, you should be able to flow some solder through the holes. If you’re lucky, the holes are still bearing copper, which can be flowed with some fresh solder. If not, just scrape away some of the surrounding solder mask and use a thin wire to make the solder find its way through the via’s, bridging their respective traces.
Also, investing in a desoldering gun is a very effective method to not get those pads and traces ripped off the board. Use loads of flux to be sure. :)
Someone gave me an Nintendo Gameboy DMG.
I turned it on and it didn’t work. I opened it up and it was super clean! No corrosion or whatsoever. I just cleaned everything with 99% alcohol and it worked again.
I fixed hundreds of these things. Nice job.
I need a lime/kiwi gameboy color without a battery cover if you have one like that.
Why don't you have one of those Hakko desoldering guns? Doing any extensive through hole component work without one is a pain. Also adding fresh soldier first helps since what's on the board is probably decades old.
I do have one but I generally only use it if I'm doing a lot of desoldering.
I've had alot of luck lately with copper plating coroaded battery terminals like that. Alot of times its hard to find replacements.
The devil in it’s purest form.
God I miss the Pokémon GBC. I had that exact model, same lens variant, played the crap out of it. What happened to it, ohh I only SOLD IT AT A YARD SALE FML. This was centuries ago sooo I don’t remember how much I sold it for, but you can rest assured it was probably a stupid low price..
How did I not know about this extra channel?
It's new! We just started uploading to it a few weeks ago. Glad you found it though!
@@TronicsFixLongs love it!!
What kind of swabs do you use for cleaning boards?
white vinegar removes battery corrosion like no other, try it ;)
The removal of the sub-board would have been helped with low-melt solder.
I think I'd have done an IPS Screen and LiPo mod on the first one. Better screen, longer battery life and you don't need the DC/DC board anymore :D
Of course the GBC isn't "original" anymore, then.
Yep, it's always hard to decide what to mod vs keep original.
Try using an acid brush with bristles cut off about half to clean and remove flux.
Great tip
Do you ever give a run down of the final costs? I know you said how much you paid for them on ebay, but how much are those replacement parts? Just curious. Thanks.
I sometimes do but I didn't keep track on this one
I really think time for you to invest in some low melt solder
I want to get into soldering but equipment is so expensive from what I see, is there a good soldering kit to get for beginners?
I subscribe and hit like,but all i ge is the old ones
Bite marks!? Human or animal? Sometimes games bring out the rage. 🤣🤣
Is the water-damaged GBC with Meowth, in a genuine (and original) Australian-edition Pokemon shell?
god, that ifixit kit... whos idea was it to etch the bit types into the foam like that?
Buen video
Where's the restoration video of the last GB Color? I didn't see any link..
i wish i still had my pikachu gameboy. I dont even know what happened to it.
They're pretty cool. It's probably in the back of your closet, lol
where is the other video of the really broken one?
Where's the video for the really messed up game boy color? Didn't see it at the end.
Give the corrosion board to my mate Vince
I have fixed a lot of them. Sometimes this is just a problem with the fpc connector of the screens flat cable. I scrape it with fine sandpaper carefully and voila!
I had one of those as a kid. So sad I threw it out when it stopped working. Dumb kid brain
Nooooooooo...lol. That's a bummer but I think we've all done stuff like that.
do you sell any of the stuff you repair?
Sometimes, yes. We sometimes sell on Whatnot (whatnot.com/invite/tronicsfix)
I need an original Xbox repaired. Who do you recommend?
Unfortunately, I don’t know of anywhere to send older consoles to. Sorry about that.
@@TronicsFixLongsThanks anyway. BTW, I have been watching you for a long time now and I am one if your biggest fans, Thanks!
It would be nice to buy an empty gameboy board and transfer it to the corrosion card. sold in some places
Why dont you use vinegar?
No link to restoration video
I had one of these when I was a kid. I lent it to my scummy aunty and she still has it! She took it from an 8 year old me!!!
So take it back
I want to make comments!
why not used mini electric screw driver..
I need a lime/green/kiwi gameboy color with no battery cover if anyone has such a thing.
No regular vinegar so you used apple cider vinegar I'm guessing lol. I'm sure it works all the same
Lol, maybe
WIsh I could fix the audio on mine.. the 2 contacts are gone on the board.
I've not fixed that specific problem but you should be able to create some jumpers from the board to the speaker. It does take some soldering skills though
@@TronicsFixLongs Ive read that I need to scrape on the boards until I can get new solder points and I know where to, ive just been afraid to lol
wow
Wick up?...
Rare? Even I have 2 of them and a normal one
Replace screen . Its not corrosion
You didn't finish the video then :)
Please invest in a suction gun. The plunger is imho terrible and just using wick is just going to destroy the pads.
I have a desoldering iron and use it when I feel that it's the best tool for the job. Solder suckers work great if you know how to use them and wick also works great when you have a feel for how to use it effectively.
🥸
for someone who does this for a living, how do you not have a proper solder suction gun....that whole job would have been done in 10 seconds flat.
Everyone has their own preference of tools.
I do have one. I usually only bring it out if I need to do a lot of desoldering.
What they said☝️