As a tow company I think this is the best rc tow truck I have ever seen . You could make a fortune selling these and if I ever hit the lotto I'll be calling you . Would love to have it .great job
As both a long time rc guy and tow truck driver....all I can say is......this is truly magnificent work my friend......now all you need is the scale customer bitching about the scale bill and the storage charges and it would be perfect...
im an accident recovery specialist in GA i clean up accidents daily. might i say sir, that is a text book perfect roll over. no need to move the truck just snatch block pull release block and drag er up
Being a former two car flat bed operator, who worked Wisconsin interstate for the sheriff department, I'd have to say you made it look like you've actually worked a real full size tow truck before. Using the snatch block and the flat beds position was dam near perfect. And lifting the pickup truck with the bed tilt to allow you to get the pickup truck squared to the tow trucks bed was spot on 👌 All things I've done a thousand times over the years I've towed. A lot of people are highly surprised at how much you can move / manipulate a vehicle with a snatch block and some chains anchored/pocketed to certain positions on your bed. Nice work and nice video 👍👍
I would love to see the step-by-step process of building that Tow Truck, let me just say, that is a beautiful RC and my hats off to the craftsmanship of the build.
If you had remembered that glass shatters, the drivers window should be gone. Looks like a melted toy in this video. Follow realistic glass crack lines with an X-acto knife on the windshield. After that with the rest of the truck looking this good, it would look very real. Nice work.
The most important thing I noticed in this video is that the e-brake was set and the wrecked truck didn't roll away. And these are RC trucks. Had this been real, we'd be watching another wrecker driver chasing a rolling away truck watching his job slip from his hands lol.
Holy shit 1.8 million views. Kick ass dude. I remember years ago being a member of mid mich crawlers on fb and seeing these builds. Is that page still a thing? Haven't been on for in a few years.
I'm looking to build a 1/8 scale roll back, would love to talk more about how to pieced the electronics and mechanics of the bed. Turning an 8x8 crawler into a tow truck. Also love the sounds. Any help would be appreciated.
I enjoyed your video and it got me wondering on building one but need a figure out how the bed roller work. Do you have any more videos of your build. If not could you me in in the right direction.
Very nice, well done, best tow truck i seen here on youtube.Where did you find that body, i am getting ready to build a tow truck myself but can not find any good body for it, most of them are to small.
Hello, nice flat bed. reminds me when my real Chevy needed a tow :) what is the scale of the international and where are they available, if still. other than that, AWESOME truck. would like to get more details on it. i'm myself a huuuuge RC guy, since more than 30 years. again, thanks for sharing your great idea
thanks for your quick reply, 1/8 scale, a bid big for my 1/14 trucks and cars. gotta get a 3d printer :). keep up the good work, curious what comes next
okn this is awesome. i had this same idea to scratch build a rollback wrecker. Im already waist deep in the build. already have my deck made. How did you get the bed to roll back and tilt? is it something you concocted with servos and sheaves, or is it something you were able to purchase whole (like from a rc semi truck or something)? Please advise as this is where Ive currently gotten stuck at
the only thing I saw was that you should have x'ed the rear safety straps. crossing them prevents the recovered truck from shifting side to side. other than that, flawless.
Stops the vehicle from wobbling, man knows what he is doing already tho, you can tell that by how he used that snatch block and chain, unless he just got lucky.
I don't know mike I did not c the safety chain in the front I might have to have the law issue a ticket you know the law 4 point hook up with a safety chain don't b lazy ha ha great craftsman ship keep up the good work
Where did you find a Durastar cab? I can't seem to find a part for it anywhere, or even a 3d model for a printer Also, it's good to finally see someone who knows how to run a rollback. Too many people just moving things and hoping it looks good
As a tow company I think this is the best rc tow truck I have ever seen . You could make a fortune selling these and if I ever hit the lotto I'll be calling you . Would love to have it .great job
As both a long time rc guy and tow truck driver....all I can say is......this is truly magnificent work my friend......now all you need is the scale customer bitching about the scale bill and the storage charges and it would be perfect...
The RC Sniper lol thanks
The RC Sniper make some rollbacks. You could sell a hundred before the end of the year. I would buy two today. Nicely done. Mini-j hooks are so small.
Nice to see other tow drivers! Safe driving from CT!
im an accident recovery specialist in GA i clean up accidents daily. might i say sir, that is a text book perfect roll over. no need to move the truck just snatch block pull release block and drag er up
Thank you
Wreckmaster trained
Awesome tilt deck, nicely detailed. I like how you used the snatch-block to right the pickup :D
thanks
Jonathan G love your shows I watch them every time I get a chance to
I love cars & trucks all kinds of vehicles
A snatch block is typically how that is done.
Being a former two car flat bed operator, who worked Wisconsin interstate for the sheriff department, I'd have to say you made it look like you've actually worked a real full size tow truck before. Using the snatch block and the flat beds position was dam near perfect. And lifting the pickup truck with the bed tilt to allow you to get the pickup truck squared to the tow trucks bed was spot on 👌
All things I've done a thousand times over the years I've towed. A lot of people are highly surprised at how much you can move / manipulate a vehicle with a snatch block and some chains anchored/pocketed to certain positions on your bed.
Nice work and nice video 👍👍
This has to be the most detailed rc tow truck I've seen built from scratch very nice job man
Thank you
I would love to see the step-by-step process of building that Tow Truck, let me just say, that is a beautiful RC and my hats off to the craftsmanship of the build.
thank you
I'm a rollback operator for Mike's Wrecker in Concord NC and that's really cool
thanks
best rc tow video I've seen! attention to detail is completely outstanding! the police car rolling up was awesome
thank you
your clearly a real tow truck operator.. cool video
thanks
The rollback looks freaking amazing!!!!
Nicely done Michael! Looks like you’re having fun!
Neckbonz thanks
great job with the tow truck... really like it
thanks
I about choked from laughing when the cop pulled up!!🤣. Great Video!
The rc police car is a chevy camaro which results with Sergeant Bumblebee. 🚓🐝👮
I like how you use the rigging on the side of the tow truck so you don't have to push it with your hand it really did look realistic
thanks
that's a really realistic tow truck my dad used to drive almost the same model
thanks
2 years later. This is still cool as hell.
Respect to this man still hearting comments after 5 years
Awesome build mate 😎 Epic
Thanks
Yooooo,the flatbed sounds real during startup,,awesomeeee
david peirce thanks
Awesome truck, amazing built
thanks
Well made I like the roll back the most
great little snatch block
Awesome scale footage 👍🏾💯
Real tow truck driver skills there. Nice job.
thanks. I have wreckmaster training
+Michael Blazer خانمناتتن
english?
It was!!
+Chevy King I was referring to the other guys comment
1.5M views!!! Hells yeah bud!!!
Love this build.
Jack Bias thanks
I would love to have one of these
Sweet Wrecker, excellent build!
B Hiltz thanks
Very well done and impressive!
boneymaxfield thanks
Awesome job Mike !!
thanks
Fantastic build!
thanks
+Michael Blazer ??
Amber Mayle yes
As a tow flat bed driver I love this
If you had remembered that glass shatters, the drivers window should be gone. Looks like a melted toy in this video. Follow realistic glass crack lines with an X-acto knife on the windshield. After that with the rest of the truck looking this good, it would look very real. Nice work.
Ken Sutherland the windows are done with an exacto knife
I keep waiting for real drivers to walk up, nice job
thanks
awesome! nice build!
man that was sick i got a 6+6 im tryn for the bed to go down yours is amesing work great vid
Hincho Racing Thanks
Awesomeness right there buddy!
thanks
+Michael Blazer were did you get that tow truck
+Tony Valdepenas
I scratch built it
+Michael Blazer its a great tow truck
+Tony Valdepenas
thanks
badass work n video looked so real cop car was a added bonus!!!
thanks
That tow truck is awesome, loved how you used a wrecked ford lol
thanks
ييب
Michael Blazer
توفيق ا
Anton R. Ow
The most important thing I noticed in this video is that the e-brake was set and the wrecked truck didn't roll away. And these are RC trucks. Had this been real, we'd be watching another wrecker driver chasing a rolling away truck watching his job slip from his hands lol.
Love this truck; I really want to build a tow truck flatbed like this. Might have to shop for some parts to convert one of my Axial crawlers. hmmmm
Very cool footage thank you for sharing. New Sub.👍
Thanks
Holy shit 1.8 million views. Kick ass dude. I remember years ago being a member of mid mich crawlers on fb and seeing these builds. Is that page still a thing? Haven't been on for in a few years.
Thanks. Yes its still there but not very active
absolutely amazing job , speechless , thanks for sharing
thank you
I love how the cops showed up and the actual damage to the accident vehicle 🙃
HUGE FAN OF THIS
Cool video man
Aww amazing job, congratulations from México (y)
Marc Andatti thank you
That was awesome.
You should add a side puller with a separate winch and outriggers
Wife: Get a life stop playing,with toys. Him: This is my life
4 years later it is cool
Thanks
Stunning
I'm looking to build a 1/8 scale roll back, would love to talk more about how to pieced the electronics and mechanics of the bed. Turning an 8x8 crawler into a tow truck. Also love the sounds. Any help would be appreciated.
There's pics on my Facebook page. I only do this for a hobby so I tend not to provide tech support
Awesome truck
Thanks
Greatest! ❤️❤️
I enjoyed your video and it got me wondering on building one but need a figure out how the bed roller work. Do you have any more videos of your build. If not could you me in in the right direction.
facebook.com/Blazers-Builds-652557841554561/
I love this I am always dreaming of having one of these
Misty Coffey thanks
Michael Blazer no problem
Michael Blazer where did u buy de tow truck
legae Matsafu I built it
I remember this one on FB lol Pretty cool :o)
Bushman RC thanks
now I want one it's so cool my dad mite want one since he's a tow trucker nice tow truck
Cale Bane thanks
Michael Blazer can I get one
Cale Bane It's the only one of its kind that I scratch built and I only build for myself sorry
Michael Blazer oh its ok
Simply astonishing! How do you find such tiny drivers?🤔
Love it. Who makes the body of the F150?
New bright
@@michaelleehumble thank you
Awesome work. !! Bad ass
Fernando Basulto jr thanks
awesome video
Thanks
man your toys are good
I have many more
m.facebook.com/Blazers-Builds-652557841554561/
Amazing job what parts did you buy? Bed truck body?
I bought the cab. the rest I built
I need this in my life.. time now!!
Where did you buy that flatbed. I want one to haul my brushless around and I have a tow company also
I scratch built it
i did like your page on fbk... and really u awesome tho.... really i love your job....
thank you
+Michael Blazer and also i have my page too... is "fiebre rc cars 1/24 and drag slot cars 1/24"
+Michael Blazer and also i have my page too... is "fiebre rc cars 1/24 and drag slot cars 1/24"
+fiebre rc 1.24 The Game Changer
I like the slot cars
+Michael Blazer i made from chassis slot cars.... steering wheels, rc with lights... I'm the only one in the world
You should contact the jerrdan company and have them make those and sell to the public
I want that tow truck really bad
wow Nice towing
thank you
Wow love it excellent!!
Very nice, well done, best tow truck i seen here on youtube.Where did you find that body, i am getting ready to build a tow truck myself but can not find any good body for it, most of them are to small.
Thanks. the body is a 6th scale new bright CXT
+Michael Blazer were did u get the tow truck
+4th avenue pebble beach
I built it from scratch
+Michael Blazer dope man what's the price of the build
+4th avenue pebble beach
it's not for sale but I have around 1500 into the materials
Hell YHEA snatch block and all love it that's as realistic as it gets fellers and ladies
real tow truck driving skills
thanks
No problem
wow I hope who ever was in the pick up are okay
great video!!! I thought it was real.
thanks
I hope the driver was ok
That was cool! 🤣😂🤣👍🏽
Cool video is that a 1/18 scale police car? If so for whats it worth is it worth it? Thanks.
ThatsMyRc no it's 10th
Where'd you get that tow truck? its sick
The Sneaker Kid I scratch built it
Michael Blazer Ohh. its cool👌
The Sneaker Kid thanks
good video bro I like
EL MADRE MIA thanks
Hello, nice flat bed. reminds me when my real Chevy needed a tow :) what is the scale of the international and where are they available, if still. other than that, AWESOME truck. would like to get more details on it. i'm myself a huuuuge RC guy, since more than 30 years. again, thanks for sharing your great idea
it's 8th scale and the bodies are rare
m.facebook.com/Blazers-Builds-652557841554561/
thanks for your quick reply, 1/8 scale, a bid big for my 1/14 trucks and cars. gotta get a 3d printer :). keep up the good work, curious what comes next
+markcruiser thanks
Is everything built from scratch? The police car and all that? Btw very realistic! Nice job!
I built the rollback, and "smashed" the new bright ford. The cop car is stock from Vaterra
and thanks
? This is awesome
okn this is awesome. i had this same idea to scratch build a rollback wrecker. Im already waist deep in the build. already have my deck made. How did you get the bed to roll back and tilt? is it something you concocted with servos and sheaves, or is it something you were able to purchase whole (like from a rc semi truck or something)? Please advise as this is where Ive currently gotten stuck at
Threaded rod and linear actuators
@@michaelleehumble attached to a motor or winch servo?
@@ccLA08 servo
@@michaelleehumble does your actuator require a channel on your remote? or does it work in sequence/tandum with the rod?
@@ccLA08 all independent channels
How much did this cost to building? Has to be in the thousands! Great work!
I think I had 3-4k into it
👌😂👍that was cool!
the only thing I saw was that you should have x'ed the rear safety straps. crossing them prevents the recovered truck from shifting side to side. other than that, flawless.
tim bobaganoosh thanks
Stops the vehicle from wobbling, man knows what he is doing already tho, you can tell that by how he used that snatch block and chain, unless he just got lucky.
I don't know mike I did not c the safety chain in the front I might have to have the law issue a ticket you know the law 4 point hook up with a safety chain don't b lazy ha ha great craftsman ship keep up the good work
I have all the proper equipment now lol
+Michael Blazer hope to c some new projects i will b following thanks
did u back up into the police car? lol, this was really cool
Pido Garcia no I didn't lol
thanks
that was awesome
thanks
Your welcome
Where did you get this stuff it's nice
I made it
Do you have any info on the build of the tilt on the deck?
On my Facebook page Blazers Builds
i used to fly rc planes, what radio are you using? i used a futaba skysport 6a on a telemaster 40, with a OS 70 4 stroke engine.
michael king dx8
Where did you find a Durastar cab? I can't seem to find a part for it anywhere, or even a 3d model for a printer
Also, it's good to finally see someone who knows how to run a rollback. Too many people just moving things and hoping it looks good
It's the cab off a New Bright CXT 6th scale
@@michaelleehumble
Yeah but that means I have to buy a New Bright product and I don't know if I can stomache that
Good luck finding one
Seems like they're fetching high prices, bugger
Thanks for replying, though!
The small cop car gave me a laugh
how many hrs to build great job maybe a heavy duty in the future you have the talent
thanks.
took around 6 months of building countless hours
ok that was cool
Steven Paige Thanks
Steven Paige 666 poo
I hope the guy driving the Ford is ok! LOL
he was gone before I got there. beer bottles in truck
Haha