The author does like to ruclips.net/user/postUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz from scratch, shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practice the full stack project, is still great.
The teapot has been a staple of Autodesk (and largely by computer graphics artists) products. Its roots go all the way back to the 1970s as the standard model to test code against, it is the picture equivalent of "Hello World" in programming or the "Benchy" in 3d printing. Hence the teapot for renders! Excellent video as always, thank you!
As an FYI, when you cut, you don't need to hide the pieces you don't want to cut. Instead, you can actually uncheck the bodies you don't want to cut by clicking on the "objects to cut" arrow. HTH
VIDEO STARTS AT 8 MINUTES! This is one of the most unnecessary filler (with junk) videos I have ever seen. Advertisements is cringe before you do the actual content. Bro....this ain't it
Really nice video Shaun! While I have never used Fusion 360 to model, this was a very comprehensive dive into the program. And I will definitely give it a shot now. This series of videos are super helpful.
The reason the render button uses a tea pot is the Utah Teapot (en.wikipedia.org/wiki/Utah_teapot ) a very common 3d model used for testing renderers in the early days of computer graphics.
It's one of those things that I'm so familiar with it wouldn't even occur to me that someone wouldn't know about the teapot. Note that the closing parenthesis broke your link.
The real power in a program like Fusion is the ability to model something based on parameters and fully defined sketches. This allows you to make design changes extremely easily during or after the initial design stage. Fusion is a deep program and learning how to fully define your sketches and ensuring your extrudes are to object surfaces etc are key to being able to change one dimension and have your entire model update correctly without chasing down broken pieces. For example, something super simple: You want to change the design of the finger pulls from half circles to a square opening. Had you created a sketch, you could simply go in and modify your sketch and update the feature. Using primitives to add to pieces or cut from pieces works, but doesn’t take advantage of the real power of parametric design. Yes, you can go back in the history and edit that feature, but it doesn’t allow you to drive an entire design from a couple of parameters. Fusion really requires a complete mind shift from how you model in Sketch Up. Once you can get away from the way you model in Sketch Up, you will be so happy. Especially if you ever want to come back to a design and change one or two parameters and have the entire design magically update! Including drawings!
Offsets are great, but when building furniture I've used some of the parametric functions to set dimensions for my stock. Like, putting in that my stock thickness is 19mm for plywood. That way, I can just change that one variable and that dimension changes throughout my model. It's super powerful!
Additionally, when you set your parameters for stock thickness as an example, you can start building dados/rabbits with formulas. Like setting the dado depth as .5*stock thickness, and then the dado depth automatically changes if my stock thickness changes or I find a different plywood vendor.
This is fantastic Shaun. I waited a while to watch it until I had a solid block of time and I'm glad I did. If you guys go forward on tutorials I would love to see an advanced tutorial showing how you did thr Cece rocking chair for example (since the curves and joints make it a pretty advanced project). Thanks! Great video and I think I'm ready to tackle Fusion 360! (Btw, I'm sure by now you've heard of the "Utah teapot" 😉 I think that's why the render icon uses a teapot)
Pushing luck here, any chance you have something showing how to take a design to a cut list ? Thats especially when it becomes clear if you've create the components correctly.
Hi, Thanks for the clear explanation. Do you create any kind cut list? Or any kind of printed measurement? I have a pretty good understanding of Fusion, but then I find myself with a nice picture, but not very useful when I need to set my stop block... Thanks again!
You should make more tutorials. Love your videos, but you were slow, deliberate and only showed what was needed to get the job done. I have watched several tutorial videos for 360 and I liked yours the best so far.
Using fusion without parametric modelling is like buying a supercar and never taking it out of the fitst gear. The primary reason why i personally use it for furniture modelling is this very capability. Plus the fact it is free for hobbyists which is awesome if you ask me.
"...print it out, find your favorite magnet, and put it on your fridge so that your family will finally be proud of you for spending countless hours learning a computer program to make little pictures of the furniture you've designed." As a draftsman of four years, that hit me on an emotional level! I am so thankful that my Dad still renovates houses to this day so that I can share my drafting skills with him when we're working on projects together. I was even lucky enough to draft an addition for my grandfather's house before he passed. He was a seasoned old-school draftsman that helped design many of the World's Fair parks around the USA. I feel very much for the people that do not have the sort of friends and family that can appreciate the skill, expertise, and real-world-benefit that comes from learning these modeling programs.
I just started sketchup after using Fusion360 for 2 years now. Some things are so much easier and you can somehow do the same things with less tools. The thing I don’t like the whole groups and Collection thing in sketchup. It’s all so messed up. I love the organization in fusion 360. The huge advantage of sketchup is definitely the 3D warehouse.
Hi, I always enjoy your builds. I'm computer shopping and need some advice. I plan to eventually get a powerful desktop, so I don't want to spend too much on a laptop...so for a 360 capable laptop that will eventually only run Lightburn, do you think to slower i5 or i7 chips with clock speeds of
That would be one of the primary questions requiring clarification, having a great 3d model is worth little if you can't duplicate it in real life, which is hard to do without usable plans. And cut sheets are super important to speed up the work and minimize waste
I was following along and then couldn't follow when you started to extrude. I finally realized the problem was I set my view to start based on the color of your axes. For some reason your Z axis is green and mine is blue, so I was working on in the top of view for my sketch not the front view. When I figured out my mistake and stated in the front view w/ my blue z-axis and red y-axis, everything fell into place. From what I read z is blue based on the world coordinated system. Why would it appear green in the video? That said, very helpful getting started w/ Fusion 360 video.
quick question and i really hope you reply back. Are you using macbook for this demonstration? the fusion 360 i downloaded yesterday has slight variations from what you are showing.
Hey, I know why its a teapot!!!! Way back when Autodesk was first making rendering software, their test render piece was a ----- Teapot ------ so they kept it as a icon. This was in the 80's.
I mean fusion 360 I am sure is great to use. The price though still has me Wondering with my poor bidenomics law abiding citizen life, a set of tires or a program I may make some money with? 😢
Does anyone have a fast way to trace an image? for example, if I wanted to import a line drawing of a logo and turn it into a 3d model for CNC. I know you can use the line and free-draw tool on top of the image but that method has been pretty hard for me to get accurate results and it takes me forever. Thanks!
Great inspirational video with many useful tips. A LOT to digest for newcomers but great to see the potential of Fusion 360. I thought the cabinet would have provided a great opportunity to demonstrate the value of parametric modelling but probably too much for this occasion. The area that I didn't quite understand was how the various parts were dimensioned......... to create a cut list foe the workshop. Thanks for sharing!
In terms of the techniques and tool sets used to create the more tedious parts of the model, such as the miters and datos, Fusion sees to be more efficient to use than Sketchup.
Nice vid! I slowly learn to use fusion and I learnt a few tricks in this video which will speed up my workflow: thanks! Can't wait for part 2 now, to be even with SketchUp.... 🤣🤣
re why the icon is a teapot (24:07) - I assume it's a teapot because of the "Utah Teapot" which has been used as a reference object when rendering in 3d graphics programs since 1975(!)
@@shaunb66 make sure all your sketches are fully constrained for better luck with parametrics. Easy check is to grab a line in the sketch and see if you can drag it about
I love your channel guys but you are missing the point of parametric design... you are just doing an “advance” design style sketchup. I can’t recommend this video...
@Cottontail Grouse While they have changed the hobby license. It can still do everything Shaun mentioned in this video. There are some restrictions, but to figure out if it is something that can help you in the shop, it is great.
Cool video though it would have been great to see how plans with dimensions could be made. I use sketchup for wood and fusion for 3d printing and illustrator for shaper cnc but have never crossed the line between them since sketchup, and to some extent illustrator, are easier for me to create parts lists. Any thoughts on good videos or articles to view on how to use fusion for everything?
Sometimes RUclips (Google) is amazing... as soon as I posted my question, this video came up which shows how to create plans. Both this video and this one on plans (granted the guy is a bit annoying) combined have given me a weekend challenge! ruclips.net/video/TkaMjUR7grA/видео.html
I second that. I've found that making usable plans from SketchUp is harder than it should be (hard to make them neat, requires using another standalone program, which for some reasons lags terribly on all my windows machines (though works much better on my MacBook). All in all, it is a lot harder than it should be. I do hope that fusion has something better to offer here.
Scary! ... Ears bleeding ... eyes drooping out of sockets ...(groan) ... night of the walking dead ....Argh! TOO MUCH TECH ... Confusion ...TMI!!! ... Thanks but ... SketchUp looks so good right now .... Really -- a load of power in Fusion 360 but way beyond the needs of a garage junk maker like me ...
This is awesome! I have a traumatic brain injury & I am having a hard time learning Fusion 360. This should be easy for me to learn, but I’m really having trouble learning Fusion 360. Frustrated!
like the concepts you explaining, but a bit more detail around the how's... ie, I can create sketch, extrude into new body easy...,but then, how you take that from a body to a component that you then duplicate... aka more detail about the steps you explaining please. I'm moving over from Sketchup to Fusion360, loving the power. Busy designing a dining room side table for a friend that I will be doing. PS: when I look at material, no wood is shown ???.
Nice job. While I do like Sketchup I can see that Fusion has some more tricks, thanks to both of you for showing some examples. Ultimately it will come down to speed on how one can convert the design in one's head to a model and then ultimately plans, renderings etc. Cool to spend some time learning both packages.
User parameters allow you to set shared values and change things programatically (parametric modelling). That way all shared lengths/thicknesses/offsets can be set in one place and consistent. It really speeds up your workflow and allows for better brainstorming and designing if you want to leverage fusion 360.
Interesting that he has so much difficulty with Fusion's "parametric modeling," which is supposed to be the program's crown jewel...and which also adds a whole lot of confusing complexity to using the program. The problem is that changing one body's parameter, let's say the width of a drawer, doesn't somehow magically adjust all of the adjoining and surrounding bodies accordingly. If you reduce the drawer width of a credenza such as in the above example, for instance, either the length of the credenza's carcass needs to shorten, or a new drawer or other feature needs to be inserted within the carcass to fill the newly created gap. But the software can't do that. In fact, since there are a variety of possible "solutions" to what to do about the newly created gap, there isn't any way that software could anticipate a designer's intentions anyway. The result is that "parametric modeling," with all of the monstrous complexity that it introduces, is hard to handle conceptually and is mostly useless. Sorry, but the most efficient way to deal with changing a dimension here or there is literally to start all over from scratch, having learned from your Model v.1.0 that you really wanted the drawers to be 18" wide rather than 19", etc. However there are some features that you might have already designed in v.1.0 that aren't affected by the revised design. Ideally, you would like to simply grab them from v.1.0 and import them into your new v.1.1. Tough luck, Fusion makes that obnoxiously difficult unless you are paying your $500 each and every year, forever, or at least for as long as you want to be able to access your old designs. So this program comes to you straight from the outstretched palms of ugly con men. Be warned.
Sorry man, but you lost me there. As someone who's never used Fusion 360 before, you rushed through some of the steps and left me floundering. It's probably more a reflection on me than on your explanatory style, but by about halfway through I felt a bit like Homer Simpson - "The bees are in the what now...?"
Your fusion workflow is really bizarre. If you work this way then it would be much simpler just staying in something like sketchup because you are essentially using it in the same way.
I have a F360 problem that I haven't been able to overcome or find a good explanation for. When I am going about an F360 design, I create sketches and extrude to a body. Later on I will move, align, or join the body and it moves out of line with the sketch. It becomes hard to manage the body via the sketch. How do I better keep this all aligned and easily managed?
Not an expert here, but I think it's a teapot because a teapot is one of the basic projects you'd do if you were learning 3d modeling. (with 3dsmax etc..)
Just select the component operation option when you do the any operation like extrude. Skip the bodies step entirely as you're making it harder on yourself.
Thank for the intro to Fusion, I know how to use Maya, but want to plan an outdoor kitchen and Fusin is the new buzz. BTW, the teapost is a standard 3d reference model, one of the first to use bézier curves to model it. ;)
The incredibly high rate of failure in learning this programs is mostly due to the fact that the first three lessons are usually devoted on how to create/open a file and how to store it on your hard drive. Ah sure it’s the basic course.
quicktip for all beginners; keep your sketches clean, constrained, fully defined and simple. As Chris mentioned you CAN add fillet radius to your sketch, but there is a feature for it so better use it!
Hey mate, I have used CNC machines and worked with furniture programs for many years. Stepping away from the niche program my whole industry uses which is largely automated, getting into cutom designs for myself on my own hobby grade CNC means that your video is EXACTLY what I am looking for. Thanks so much for spending the time to teach new users!
Awesome video Shaun!! I still remember the video you made doing this prior to teaming up with Chris. It appears you have learned a lot since then. Your process seems to flow much better now. I like how you are sketching the big picture first, and then breaking it into pieces. If I remember correctly you were much more into drawing the individual pieces first before, and then combining them. And I think getting a better handle on the parametric features, and how to utilize them, will only help you get better and faster. For instance you could eventually set up a dresser so that you could just tell it how many drawers and how tall you wanted it (or the drawers) and it would calculate the rest based on what you have set up.
Hot dang!! The parametric stuff goes THAT deep? So could you for example say, instead of 6 drawers I want 3, and then it'll reduce the number of drawers and resize the drawer fronts and everything? Either way the parametric stuff seems wild
Great thanks for this. I have noticed that most of the other Fusion 360 video guides are for small enginery type drawings so nice to see it being used for furniture and larger objects. I find the zooming in an out not as fast as on AutoCad 2d and quite cluttered unless the grid is turned off. But I'm just learning 3d drawing. Can you do some more videos or are you more Sketchup biased?
When using things like the box tool that are not built from a sketch, you can right click on that element in the timeline and edit the feature to make changes.
I've used Sketchup for a while and always wanted to switch to Fusion 360 because it's a stronger modeler, but I was seriously lost. This video is perfect for me!
the fillet and chamfer function are worth the price of admission alone in fusion 360. it was the first 3d modeling software I learned, then switched to sketchup. this video gave me the impetus to go back. great video
@@shaunb66 I still can't ever get it to work in SketchUp. In fact I have trouble getting any curves to work well. I know it can be done but the tools are super finicky
The author does like to ruclips.net/user/postUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz from scratch, shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practice the full stack project, is still great.
The teapot has been a staple of Autodesk (and largely by computer graphics artists) products. Its roots go all the way back to the 1970s as the standard model to test code against, it is the picture equivalent of "Hello World" in programming or the "Benchy" in 3d printing. Hence the teapot for renders! Excellent video as always, thank you!
I just assumed that older computers took longer to render so it was a friendly reminder to go boil the kettle.
As an FYI, when you cut, you don't need to hide the pieces you don't want to cut. Instead, you can actually uncheck the bodies you don't want to cut by clicking on the "objects to cut" arrow. HTH
VIDEO STARTS AT 8 MINUTES! This is one of the most unnecessary filler (with junk) videos I have ever seen. Advertisements is cringe before you do the actual content. Bro....this ain't it
Does anyone know how he got the rest of the sketch back on the screen at 12:00? There was no explanation and I couldn't see him click anywhere...
I hope this video becomes the first thing people find when they search for “how to use fusion 360”
That would be great! Glad to hear you enjoyed it!
Really nice video Shaun! While I have never used Fusion 360 to model, this was a very comprehensive dive into the program. And I will definitely give it a shot now. This series of videos are super helpful.
Glad to hear it! Thanks for watching!
The reason the render button uses a tea pot is the Utah Teapot (en.wikipedia.org/wiki/Utah_teapot ) a very common 3d model used for testing renderers in the early days of computer graphics.
It's one of those things that I'm so familiar with it wouldn't even occur to me that someone wouldn't know about the teapot. Note that the closing parenthesis broke your link.
@@ardemus fixed! Thanks!
The real power in a program like Fusion is the ability to model something based on parameters and fully defined sketches. This allows you to make design changes extremely easily during or after the initial design stage. Fusion is a deep program and learning how to fully define your sketches and ensuring your extrudes are to object surfaces etc are key to being able to change one dimension and have your entire model update correctly without chasing down broken pieces.
For example, something super simple: You want to change the design of the finger pulls from half circles to a square opening. Had you created a sketch, you could simply go in and modify your sketch and update the feature.
Using primitives to add to pieces or cut from pieces works, but doesn’t take advantage of the real power of parametric design. Yes, you can go back in the history and edit that feature, but it doesn’t allow you to drive an entire design from a couple of parameters.
Fusion really requires a complete mind shift from how you model in Sketch Up. Once you can get away from the way you model in Sketch Up, you will be so happy. Especially if you ever want to come back to a design and change one or two parameters and have the entire design magically update! Including drawings!
Thanks for sharing!
I worked with DS CATIA in school. Is Fusion 360 similar to that?
Too much filler and wanna-be comedian moments. Ultra cringe
Offsets are great, but when building furniture I've used some of the parametric functions to set dimensions for my stock. Like, putting in that my stock thickness is 19mm for plywood. That way, I can just change that one variable and that dimension changes throughout my model. It's super powerful!
Additionally, when you set your parameters for stock thickness as an example, you can start building dados/rabbits with formulas. Like setting the dado depth as .5*stock thickness, and then the dado depth automatically changes if my stock thickness changes or I find a different plywood vendor.
@@nfwolfpryde Great tips, Thanks!
Yes! This is exactly the stuff I want to get better at. So wildly useful. Thanks for watching!
At last a Fusion360 video that is easy to follow! Good job Shawn, I am going to give Fusion360 another go because of this! Thank you so much.
Great stuff! Love using Fusion :)
Right on! It is an incredible program.
This is fantastic Shaun. I waited a while to watch it until I had a solid block of time and I'm glad I did.
If you guys go forward on tutorials I would love to see an advanced tutorial showing how you did thr Cece rocking chair for example (since the curves and joints make it a pretty advanced project).
Thanks! Great video and I think I'm ready to tackle Fusion 360!
(Btw, I'm sure by now you've heard of the "Utah teapot" 😉 I think that's why the render icon uses a teapot)
Great video! Thank you for taking the time to create this.
Also, is there a way to create a cut list from the design?
Chris we want a complete 2021 shop tour.
Pushing luck here, any chance you have something showing how to take a design to a cut list ?
Thats especially when it becomes clear if you've create the components correctly.
Hi, Thanks for the clear explanation.
Do you create any kind cut list? Or any kind of printed measurement?
I have a pretty good understanding of Fusion, but then I find myself with a nice picture, but not very useful when I need to set my stop block...
Thanks again!
You should make more tutorials. Love your videos, but you were slow, deliberate and only showed what was needed to get the job done. I have watched several tutorial videos for 360 and I liked yours the best so far.
Using fusion without parametric modelling is like buying a supercar and never taking it out of the fitst gear. The primary reason why i personally use it for furniture modelling is this very capability. Plus the fact it is free for hobbyists which is awesome if you ask me.
"...print it out, find your favorite magnet, and put it on your fridge so that your family will finally be proud of you for spending countless hours learning a computer program to make little pictures of the furniture you've designed."
As a draftsman of four years, that hit me on an emotional level! I am so thankful that my Dad still renovates houses to this day so that I can share my drafting skills with him when we're working on projects together. I was even lucky enough to draft an addition for my grandfather's house before he passed. He was a seasoned old-school draftsman that helped design many of the World's Fair parks around the USA. I feel very much for the people that do not have the sort of friends and family that can appreciate the skill, expertise, and real-world-benefit that comes from learning these modeling programs.
I just started sketchup after using Fusion360 for 2 years now. Some things are so much easier and you can somehow do the same things with less tools. The thing I don’t like the whole groups and Collection thing in sketchup. It’s all so messed up. I love the organization in fusion 360. The huge advantage of sketchup is definitely the 3D warehouse.
Both programs definitely have their strengths!
Hi, I always enjoy your builds. I'm computer shopping and need some advice. I plan to eventually get a powerful desktop, so I don't want to spend too much on a laptop...so for a 360 capable laptop that will eventually only run Lightburn, do you think to slower i5 or i7 chips with clock speeds of
So once the sketch is completed is there a way in the program to create a dimensioned cut sheet?
That would be one of the primary questions requiring clarification, having a great 3d model is worth little if you can't duplicate it in real life, which is hard to do without usable plans. And cut sheets are super important to speed up the work and minimize waste
I was following along and then couldn't follow when you started to extrude. I finally realized the problem was I set my view to start based on the color of your axes. For some reason your Z axis is green and mine is blue, so I was working on in the top of view for my sketch not the front view. When I figured out my mistake and stated in the front view w/ my blue z-axis and red y-axis, everything fell into place. From what I read z is blue based on the world coordinated system. Why would it appear green in the video? That said, very helpful getting started w/ Fusion 360 video.
quick question and i really hope you reply back. Are you using macbook for this demonstration? the fusion 360 i downloaded yesterday has slight variations from what you are showing.
Hey, I know why its a teapot!!!! Way back when Autodesk was first making rendering software, their test render piece was a ----- Teapot ------ so they kept it as a icon. This was in the 80's.
I mean fusion 360 I am sure is great to use. The price though still has me Wondering with my poor bidenomics law abiding citizen life, a set of tires or a program I may make some money with? 😢
Does anyone have a fast way to trace an image? for example, if I wanted to import a line drawing of a logo and turn it into a 3d model for CNC. I know you can use the line and free-draw tool on top of the image but that method has been pretty hard for me to get accurate results and it takes me forever.
Thanks!
I appreciate the video, but the PC version just doesn't work the same way as the MAC version your using.
Great inspirational video with many useful tips. A LOT to digest for newcomers but great to see the potential of Fusion 360.
I thought the cabinet would have provided a great opportunity to demonstrate the value of parametric modelling but probably too much for this occasion.
The area that I didn't quite understand was how the various parts were dimensioned......... to create a cut list foe the workshop.
Thanks for sharing!
Does each program, Sketch and Fusion have tutorial programs and how do they compare?
So... Would you then "explode" the parts and print out the plans and dimensions for each piece?
Man this dude is so funny. So much funnier then that other guy....what's his name...
In terms of the techniques and tool sets used to create the more tedious parts of the model, such as the miters and datos, Fusion sees to be more efficient to use than Sketchup.
This was great, I hope you can make more stuff using fusion. Maybe you could get into Nesting, Cut Lists, and Annotation Drawings.
Nice intro. If you update, consider highlighting your cursor.
Nice vid! I slowly learn to use fusion and I learnt a few tricks in this video which will speed up my workflow: thanks! Can't wait for part 2 now, to be even with SketchUp.... 🤣🤣
Glad you enjoyed it!
I did not see any dimention lines on your project. So, how do you know how to build this?
re why the icon is a teapot (24:07) - I assume it's a teapot because of the "Utah Teapot" which has been used as a reference object when rendering in 3d graphics programs since 1975(!)
Fantastic work on this one boys! I've always considered getting into fusion
Fusion 360 is more like a professional system than sketch up. Sketch up is better for architecture and gardens etc imo
Yeah, they both definitely have their strengths.
@@shaunb66 make sure all your sketches are fully constrained for better luck with parametrics. Easy check is to grab a line in the sketch and see if you can drag it about
I love your channel guys but you are missing the point of parametric design... you are just doing an “advance” design style sketchup. I can’t recommend this video...
Fusion 360 is also free if you are a student!
Yeah, which is awesome!
@Cottontail Grouse While they have changed the hobby license. It can still do everything Shaun mentioned in this video. There are some restrictions, but to figure out if it is something that can help you in the shop, it is great.
@Cottontail Grouse It is free for hobbyist (non commercial use).
Weird question Shaun, but where did you get your ring?
Cool video though it would have been great to see how plans with dimensions could be made. I use sketchup for wood and fusion for 3d printing and illustrator for shaper cnc but have never crossed the line between them since sketchup, and to some extent illustrator, are easier for me to create parts lists. Any thoughts on good videos or articles to view on how to use fusion for everything?
Sometimes RUclips (Google) is amazing... as soon as I posted my question, this video came up which shows how to create plans. Both this video and this one on plans (granted the guy is a bit annoying) combined have given me a weekend challenge! ruclips.net/video/TkaMjUR7grA/видео.html
I second that. I've found that making usable plans from SketchUp is harder than it should be (hard to make them neat, requires using another standalone program, which for some reasons lags terribly on all my windows machines (though works much better on my MacBook). All in all, it is a lot harder than it should be. I do hope that fusion has something better to offer here.
Scary! ... Ears bleeding ... eyes drooping out of sockets ...(groan) ... night of the walking dead ....Argh! TOO MUCH TECH ... Confusion ...TMI!!! ... Thanks but ... SketchUp looks so good right now .... Really -- a load of power in Fusion 360 but way beyond the needs of a garage junk maker like me ...
This is awesome! I have a traumatic brain injury & I am having a hard time learning Fusion 360. This should be easy for me to learn, but I’m really having trouble learning Fusion 360. Frustrated!
like the concepts you explaining, but a bit more detail around the how's... ie, I can create sketch, extrude into new body easy...,but then, how you take that from a body to a component that you then duplicate... aka more detail about the steps you explaining please. I'm moving over from Sketchup to Fusion360, loving the power. Busy designing a dining room side table for a friend that I will be doing.
PS: when I look at material, no wood is shown ???.
Nice job. While I do like Sketchup I can see that Fusion has some more tricks, thanks to both of you for showing some examples. Ultimately it will come down to speed on how one can convert the design in one's head to a model and then ultimately plans, renderings etc. Cool to spend some time learning both packages.
User parameters allow you to set shared values and change things programatically (parametric modelling). That way all shared lengths/thicknesses/offsets can be set in one place and consistent. It really speeds up your workflow and allows for better brainstorming and designing if you want to leverage fusion 360.
Interesting that he has so much difficulty with Fusion's "parametric modeling," which is supposed to be the program's crown jewel...and which also adds a whole lot of confusing complexity to using the program. The problem is that changing one body's parameter, let's say the width of a drawer, doesn't somehow magically adjust all of the adjoining and surrounding bodies accordingly. If you reduce the drawer width of a credenza such as in the above example, for instance, either the length of the credenza's carcass needs to shorten, or a new drawer or other feature needs to be inserted within the carcass to fill the newly created gap. But the software can't do that. In fact, since there are a variety of possible "solutions" to what to do about the newly created gap, there isn't any way that software could anticipate a designer's intentions anyway. The result is that "parametric modeling," with all of the monstrous complexity that it introduces, is hard to handle conceptually and is mostly useless.
Sorry, but the most efficient way to deal with changing a dimension here or there is literally to start all over from scratch, having learned from your Model v.1.0 that you really wanted the drawers to be 18" wide rather than 19", etc. However there are some features that you might have already designed in v.1.0 that aren't affected by the revised design. Ideally, you would like to simply grab them from v.1.0 and import them into your new v.1.1. Tough luck, Fusion makes that obnoxiously difficult unless you are paying your $500 each and every year, forever, or at least for as long as you want to be able to access your old designs. So this program comes to you straight from the outstretched palms of ugly con men.
Be warned.
Is this for the free version of dishonor the paid version?
Sorry man, but you lost me there. As someone who's never used Fusion 360 before, you rushed through some of the steps and left me floundering. It's probably more a reflection on me than on your explanatory style, but by about halfway through I felt a bit like Homer Simpson - "The bees are in the what now...?"
Your fusion workflow is really bizarre. If you work this way then it would be much simpler just staying in something like sketchup because you are essentially using it in the same way.
I have a F360 problem that I haven't been able to overcome or find a good explanation for. When I am going about an F360 design, I create sketches and extrude to a body. Later on I will move, align, or join the body and it moves out of line with the sketch. It becomes hard to manage the body via the sketch. How do I better keep this all aligned and easily managed?
at 11:16, how do you delete the little segment that gets the dado?
Not an expert here, but I think it's a teapot because a teapot is one of the basic projects you'd do if you were learning 3d modeling. (with 3dsmax etc..)
FROM BANGLADESH . . SOFTWER NAME PLACE
This incredibly well done. Articulate. No excess words. Astute humor: "Dream within a dream..." Ha! Wonderful. Wish I could thumbs up 1000x.
Just select the component operation option when you do the any operation like extrude. Skip the bodies step entirely as you're making it harder on yourself.
It’s too bad that after you finish designing the piece of furniture you can’t just hit “execute” and have it built for you…
You should show how to create technical drawings from your 3D model to actually cut your pieces
Loved the video! Exactly what I needed to know to get started on a 3D software program. Love the comedy and the 'Inception' reference. 😅
Funny thing is I already use Fusion 360 for modelling designs for 3d printing, yet I never even thought to use it for my woodworking as well!
A great person to watch on learning how to use fusion 360 is Lars Christensen.
Edit: ruclips.net/user/cadcamstuff
Thank for the intro to Fusion, I know how to use Maya, but want to plan an outdoor kitchen and Fusin is the new buzz.
BTW, the teapost is a standard 3d reference model, one of the first to use bézier curves to model it. ;)
The incredibly high rate of failure in learning this programs is mostly due to the fact that the first three lessons are usually devoted on how to create/open a file and how to store it on your hard drive. Ah sure it’s the basic course.
quicktip for all beginners; keep your sketches clean, constrained, fully defined and simple. As Chris mentioned you CAN add fillet radius to your sketch, but there is a feature for it so better use it!
Great tutorial! What about hinges, slides, locks, etc (i.e. the mechanical or furniture hardware)?
That was BEYOND helpful! Thank you so much for the lesson! I use Fusion 360 for my 3D printer, but I'm still learning my ways around this program.
Right on! I still learn something new almost every time I use it!
So good i hope you continue other parts videos. Explain more
Not enough people are talking about that masterclass Inception bit 👏
Does this program support using a gamepad and / or touchscreen to control the camera?
This looks so much easier than sketch up.
(But costs a ton of money)
Was this video created by using the free version or a paid subscription of Fusion 360?
doubt it--unless there's been an update since then. i don't even see the 2-point rectangle as an option.
Shaun was using the full version. You can tell when the full screen is shown. All the features he showed are in the free version, though.
Great video! Do you have a video of you building this cabinet?
Hey mate, I have used CNC machines and worked with furniture programs for many years. Stepping away from the niche program my whole industry uses which is largely automated, getting into cutom designs for myself on my own hobby grade CNC means that your video is EXACTLY what I am looking for. Thanks so much for spending the time to teach new users!
I use Rhinoceros, awesome software, give it a try.
Great video and I love your humor 😂 Thanks
Yeah! Thanks guys. Hopefully I’ll get farther on this than the SketchUp tutorial...
Haha, give it a try!
i have a question how you make a cut list from f360?
Hey man, we're not supposed to know what your totem is...
Printing out usable plans with dimensions is what is missing in this video
This was the perfect video I was looking for. Thanks Shawn.
Great walk through video! That refrigerator scene is priceless 🤣
Great content, Ive been trying fusion, this has helped quite a bit, Big Thanks!!!!!
Awesome video Shaun!! I still remember the video you made doing this prior to teaming up with Chris. It appears you have learned a lot since then. Your process seems to flow much better now. I like how you are sketching the big picture first, and then breaking it into pieces. If I remember correctly you were much more into drawing the individual pieces first before, and then combining them. And I think getting a better handle on the parametric features, and how to utilize them, will only help you get better and faster. For instance you could eventually set up a dresser so that you could just tell it how many drawers and how tall you wanted it (or the drawers) and it would calculate the rest based on what you have set up.
Yeah, totally! Slowly getting better at it, I learn something new almost every time I use it.
Hot dang!! The parametric stuff goes THAT deep? So could you for example say, instead of 6 drawers I want 3, and then it'll reduce the number of drawers and resize the drawer fronts and everything?
Either way the parametric stuff seems wild
How do wood table slides work?
Well done Shaun, if you were to make a detailed paid course I would sign up for sure!
Ezzat Darwich from Egypt
I admire your work
Great thanks for this. I have noticed that most of the other Fusion 360 video guides are for small enginery type drawings so nice to see it being used for furniture and larger objects. I find the zooming in an out not as fast as on AutoCad 2d and quite cluttered unless the grid is turned off. But I'm just learning 3d drawing. Can you do some more videos or are you more Sketchup biased?
When using things like the box tool that are not built from a sketch, you can right click on that element in the timeline and edit the feature to make changes.
Very well paced, this video seems like a very good starters guide to some parts.
I've used Sketchup for a while and always wanted to switch to Fusion 360 because it's a stronger modeler, but I was seriously lost. This video is perfect for me!
Glad to hear it!
I watched several videos on fusion before I seen that you guys had one. This is by far the best one.
Thanks so much! This is what I was waiting for!
Glad to hear it! Thanks for watching!
Very helpful! I love this stuff! This video helped me get started in Fusion 360. Jam packed with crucial basics! Thanks guys =)
the fillet and chamfer function are worth the price of admission alone in fusion 360. it was the first 3d modeling software I learned, then switched to sketchup. this video gave me the impetus to go back. great video
I agree! Chris and I always talk about how different the procedure is to create a round over in the two programs.
@@shaunb66 I still can't ever get it to work in SketchUp. In fact I have trouble getting any curves to work well. I know it can be done but the tools are super finicky
Thanks, friend. That was some good shit