VLT AutomationDrive Quick Start Tutorial

Learn how to start up your Danfoss VLT AutomationDrive using the award winning easy-to-use local control panel (LCP). The well-structured menu system ensures fast commissioning and easy access to its powerful functions saving you time, energy, and money.

[@paulikass]

Very useful information, thanks for the video 👍👍

[@maduumar2042]

Thanks for your time and explanation.

[@DanfossdrivesNA]

Glad it was helpful!

[@rico2207]

Great video

[@DanfossdrivesNA]

Happy you enjoyed it!

[@sakirdag2976]

thanks

[@basilisraptakis2511]

Hi, IGBT brake module is only if i want to connect brake resistor? If i want to use dc brake without resistor, can buy the drive without IGBT module?

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com
* If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677)
or
E-mail:
Customer Service: [e-mail]
Technical Support: [e-mail]
After Sales Service: [e-mail]

[@lastfirst5790]

Is it true these can be set to supply a small current to the motors when they are off to keep them warm to keep moisture out? If so, how does one program that?

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@erbayerbay4338]

It works again after a power outage and when it comes back on. How can I stop this?

[@davonbryan4310]

How to change to English language

[@erdaltas1691]

Hello,thank you for your videos.
Relying on your experience, I have a question about danfoss fc302 cranes liebherr. The driver works for 2 days without any problems. Sometimes the free stop passes and the load is released. The driver came to our workshop for repair. We suspected the control card. When you replace the control board, the panel freezes, but it displays an internal fault error (A38). power card does not recognize the control card. This is the mco 351 card with drivers with liebherr cranes application. How to solve this problem should be followed.
THANK YOU.

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@mdnasirelaktrikclase3136]

Nice

[@DanfossdrivesNA]

Thanks

[@sabbirmunna6498]

Nice...

[@wahyunugraha8245]

Sir
How to change analog input voltage to current mode? Because 6-11 and 6-12 is missing.

[@tddedertijs5756]

There are dipswitches when you take off the display. Switch from "U" to "I" and your done.

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@Hamdo-lillah]

merci beauque pour le vidéo, s’il vous plait, j’ai un question. comment fournir un tension 24vDc pour actionne un bobine de ( contacteur ou bien distributeur ) lorsque le vitesse de variateur 100%, et priver 24vDc si la vitesse

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@JoseAntonio-tt2mb]

Good morning how i program reverse in danfoss FC 301?

[@DanfossdrivesNA]

For information please reference the programming guide which can be found at www.danfossdrives.com

[@humbulanimathisa9004]

I cant save the changes, every time it just go back. Could this mean the drive is looked?

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@Bosanac_99]

I cannot find what type of sinus vawe filter (serial output filter) is recommanded for Micro FC51? Please, any recommendations?

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@emadmohmed3262]

Fan always work and give heatsink temp error how I can fix this ?

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@mashudumawela6992]

How do I activate the "Hand On" button if is disabled. Everything when I want to run the motor on manual it says "Button Disabled"

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@batanphan1621]

FC302 CHẠY 2 CAP TOC DO ?

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@joelrohaan2462]

230V 60 Hz???

[@InstrumentCalibration]

What is the full form for VLT ?

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@uisobarikij9704]

I want 2 vfd drive danfonce

[@emmanmiclat7839]

Question: can we program a timer settings? how?

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@jorjiosapigao5417]

hvac volt drive.its possible to dc input voltage

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@manishjoshi7246]

302,75kW, drive power board defective ,how to know component detail due to coating on the board ,not possible to read.
Any checking procider to repaired power card

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@Gabohrx]

Hello, is it posible to control it via Ethernet IP CIP generic messaging with AB Micrologix 1400? I've been trying with out success. The 3 status link leds are steady ("At least one CIP connection stablished) but I cannot read or write parameters (instance 150/100).

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@niki8052]

How to change the maximum cut-off pressure for water pumps?

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@zpc8536]

Hello!!! For the power of the motor. Should I choose the higher or lower value? What s the impact of this parameter on the function of the motor fan?
Thank you!

The value is according to motor plate data. One of the main fuctions of the VFD is protect the motor and for this, you have to set the rigth values of the motor, if you put a highier value, the VFD will not have any problem but the motor will get damage soon.
I recommend do the AMA for a better perfomance and better protection of your motor.

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@ishwarkumawat5700]

Every good

[@sambunkface4163]

how to reset overcurrent sir

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@manishjoshi7246]

102 model 30kw drive power card defective ,heat sink temperature too low fault message display..
How can. I repaired it

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@lafuerzad.9368]

on my work the vfd has a low voltage reading only 175V , what should i do to set it to 220V?

[@DanfossdrivesNA]

Hello. For assistance please contact technical support at 1-888-DANFOSS

[@bhimshrestha4190]

Hello sir,I have problem on danfoss vlt fc 302 model drive.the problem is that,,, sometimes it signal short circuit,or some time,V phase losses after running half an hour.

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@hosseinmahdavi3164]

What types of drives are for water pumps?

[@DanfossdrivesNA]

For customer support please email [e-mail]

[@muhammadshahzadsaleem9950]

HELLO DEAR,
IS THAT POSSIBLE TO REPLACE VLT2800 TO FC280 WHILE USING IN RS 485 PROFIBUS DP WITHOUT CHANGING OF GSD IN CPU?? ONLY WITH PARAMETERS SETTING OF PROFIBUS DP ?

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com
* If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677)
or
E-mail:
Customer Service: [e-mail]
Technical Support: [e-mail]
After Sales Service: [e-mail]

[@rahulbaharani9857]

What is terminal 27? And what functions can it perform

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@md.shohashrezabadhon7977]

I can't unlock the password.
Some one lock the cpu.
I can't do factory reset

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@rodolpheseigneur745]

Super

[@DanfossdrivesNA]

Thanks

[@ravindrashet1722]

Hi , i would like to run 3 phase motor forward and reverse both direction , like 5 min forward and 2 min reverse , kindly let me know parameter setting please

[@DanfossdrivesNA]

Hello. Please contact technical support at 1-888-DANFOSS

[@rahemansaha7176]

my VLT Control Panel LCP31 Ordering No: 132B0200 showing Gate drive Voltage fault how to reset

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@hishammosa6977]

how to replacement VLT 5000 with FC302 the motor run by terminal 33&32 by 4 step

[@DanfossdrivesNA]

Hello. For assistance please contact technical support at 1-888-DANFOSS

[@sdsturges2464]

where do i get the trouble shooting books for dunfoss VFDs

[@DanfossdrivesNA]

For troubleshooting information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@dhineshraj12]

Danfoss VLT102 how to change the fan direction sir??

[@LBTennis]

Swap phases

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com. Or if you need immediate assistance contact Danfoss Drives:
Phone: +1 888-DANFOSS (1-888-326-3677)
or
E-mail:
Customer Service: [e-mail]
Technical Support: [e-mail]
After Sales Service: [e-mail]

[@klezmerlove]

como se apaga el display ? how reset alarm 32 after of was repair line cut?

[@DanfossdrivesNA]

Please contact your local tech support fro assistance with product.

[@stories0415]

Please let me tell about control load temperature (a65)

[@DanfossdrivesNA]

Hello. If you have a question about your AC Drive, please visit www.danfossdrives.com

[@stories0415]

Plz let me tell how to solve problem PLC fault?

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@sdsturges2464]

for cold water boosters

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@felipemalmborg3729]

Tal vez ese parámetro que necesitas debe estar desahabilitado
por otro menú inferior...

[@DanfossdrivesNA]

Hello. Please contact technical support at 1-888-DANFOSS

[@AbdulHalim-lo7dd]

Hello there how much price per unit 250kw vlt .

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com
* If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677)
or
E-mail:
Customer Service: [e-mail]
Technical Support: [e-mail]
After Sales Service: [e-mail]

[@nazrulrz2112]

Short circuit a16

[@sanishahzad9552]

37kw ka inverter mil jay FC 302

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@nadeembhasha6090]

Sir, how to over come of the alarm of
Current limit A59.

[@DanfossdrivesNA]

Hello. Please contact technical support at 1-888-DANFOSS

[@chemurusuresh67]

Danfoss Drives North America

[@mauroyolianymartinezreyes8775]

muy buenos días...
tengo un variado danfoss . que trabaja a pulso lo he revisado todo pero no me muestra ningún error, pero tampoco me sale la opción 4 solo 1 2 3 5 6 7 8, y nose como hago para que me salga esa opción que estoy buscando que es la 4.. y me queda dando pulso el motor cuando gira

[@astrocchia]

+mauro yoliany martinez reyes I am sorry to hear you are having difficulty. Please contact our 24/7 customer service department and they will be able to assist with your issue. 1 [phone]

[@rimuislam8424]

danfoss drive showing an alarm but i couldn't reset the alarm.alarm code-A47,A48.have u any suggest?

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@jhajivlog8618]

good

[@DanfossdrivesNA]

Thank you

[@user-yt8rr1jm3i]

What does P/N mean on the VFD drive?

[@harryjohnson8371]

How do you change to 0-10 volts?

[@Sudhirtechnical]

Dip switch available in back side of LCP display

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@nickmiller4544]

my danfoss vfd will not restart it self after power off during maintenance , i have to reset it from my BMS system.
where do i go to change that? so i dont have to reset it from my BMS system. thanks

[@DanfossdrivesNA]

For assistance with your drive please contact 1-888-DANFOSS

[@bilenkassahun4549]

Hi l would like to know why 380v

[@bilenkassahun4549]

Hi i would like to know Why 380v frequenc convertor over loaded?

[@DanfossdrivesNA]

Hello. For assistance please contact technical support at 1-888-DANFOSS

[@user-xy8xv4yp2y]

Что означает ошибка А13 ???

[@paulamadasun6542]

how can I change from 60HZ to 50Hz using Danfoss drive thanks in anticipation

[@DanfossdrivesNA]

For tech support information please visit www.danfoss.com/en-us/service-and-support/fix-and-troubleshooting/drives-support/

[@tiepphamphu1776]

HOW DO SYSTEM AUTO RUN

[@DanfossdrivesNA]

Hello. For assistance please contact technical support at 1-888-DANFOSS

[@SebastianVJ]

Can we use terminal 53 for voltage mode and terminal 54 for current mode

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com
* If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677)
or
E-mail:
Customer Service: [e-mail]
Technical Support: [e-mail]
After Sales Service: [e-mail]

[@Hardikpatel3700]

Sir how to set starting freq 30hz

[@DanfossdrivesNA]

Hello Hardik. For assistance with your drive, please contact technical support at 1-888-DANFOSS.

[@Hardikpatel3700]

I am from india

[@DanfossdrivesNA]

Please visit drives.danfoss.com/danfoss-drives/sales-offices/#/ to locate your local Danfoss Drives office.

[@trosen231]

First going to limits/warnings.. set the limit for 30 Hz./warnings. Then going to ramps look for other ramps. Change your initial ramp and your final ramp to one second. Now it will go from 0 to 30 hz instantly and when stopping it’ll go from 30 to 0 hz instantly. It sounds like the application is a submersible well pump?

[@karthikyadav2668]

basic drive setting ple

[@DanfossdrivesNA]

Please visit drives.danfoss.com/danfoss-drives/sales-offices/#/ to locate your local Danfoss Drives office.
for assistance.

[@DanfossdrivesNA]

Hello. Please contact technical support at 1-888-DANFOSS

[@md.billalhossainmondal6956]

Video not clear

[@aravind07eee]

Factory password pls

[@bhimshrestha4190]

Hello sir

[@ketanparmar8878]

Hindi me video banaiye

[@solomonatesim9897]

Sir please l want to see how to setin Trane AC Alarm

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@stories0415]

Very urgent

[@DanfossdrivesNA]

Hello. If you have a question about your AC Drive, please visit www.danfossdrives.com

[@AshishKumar-qp5yq]

Warn

[@DanfossdrivesNA]

For installation, start-up, programming and troubleshooting assistance please email: [e-mail]
or if you need immediate assistance contact Danfoss Drives 24/7 tech support at: +1 888 DANFOSS (326-3677)

[@omarfaruk7649]

Hay boss plz at fast clear all video

[@vijikarthik29karthik4]

Hi sir, my plant working as two danfos vlt drive ,one drive running 10 hrs after that automatically change in another drive,I don't know which parameters, please let me know

[@mahiislam1708]

Sir, Let me inform if I want to run by plc signal .what would be controlling diagram.

[@DanfossdrivesNA]

For additional information please visit www.danfossdrives.com.
* If you need immediate assistance contact Danfoss Drives: Phone: +1 888-DANFOSS (1-888-326-3677) or by E-mail:
Customer Service: [e-mail]
Technical Support: [e-mail]
After Sales Service: [e-mail]