Effetto Mariposa Tyreinvader Tech Video

TyreInvader is a pinch-flat prevention device. Very simple to use and light, it gets the job done (save your tyres and rims from hard impacts) without interfering with the way your wheels behave. Available in several widths, to fit rim and tyres from Gravel to mountain bike Plus.

[@ianmorrow679]

The 29er mark was way to short for me as well, I’ve got ~3 inch gap with the cable ties. Running DT Swiss e1900s (30 wide as well)

[@EffettoMariposaSagl]

Hello Ian, Tyreinvader is "tight" on purpose so that - once mounted inside the tyres - it will stay in place no matter what and protect the rims in case of sudden loss of pressure.
To do a test, assemble Tyreinvader with zip-ties and fit it on the wheel (without tyre): you'll see it sits on the rim outer circumference just fine. Obviously, when the tyre is in the way, the fitting is much tighter and you'll need some efforts to have the last section in... but it's do-able.

[@manueljoserodriguez9566]

Imposible for me install It on a dtswiss 30 wide, with a 2'4 Maxxis dhr the 55 version on 29

[@EffettoMariposaSagl]

Very strange. Would you mind writing us on [e-mail] so that we can assist you? Thanks in advance!

[@EffettoMariposaSagl]

As a further comment, tyres with a stiffer casing make accomodating Tyreinvader on the wheel more difficult.
Most tyre inserts are not very easy to mount, and Tyreinvader is normally considered "easier" than most (we mounted them all, to test them!): making Tyreinvader longer will make mounting easier, but it will compromise its ability to stay in place while riding.

[@manueljoserodriguez9566]

@@EffettoMariposaSagl i did It in the front wheel, with a Maxxis dhf 2'5, not too much problem, just be patient... But finally i cannot mount It in rear wheel, i make the tyre invader wider, but no luck, and finally broke my tubeless Tape... I Will try Next time with a wider model like 2'5