А почему он размечает и сверлит именно так? Ведь могут не совпасть расположения отверстий. Вот я, например, сначала скотч-тэйпом прикрепил- бы в двух местах, там, где нет отверстий, две симметрично сложенные роговые створки к хвостовику-рукоятке ножа с одной стороны, чтобы были видны отверстия. Потом просверлил одно отверстие всборе, пакетом и сразу вставил в него подходящий винтик и закрутил на него гайку. Потом просверлил-бы второе отверстие и в него тоже сразу вставил-бы винтик и закрутил на него гайку, чтобы держалось. Затем просверлил-бы третье отверстие, начиная со стали, в обеих роговых створках. Но третий винтик я не вставлял-бы. Потом я срезал-бы весь скотч-тэйп с рукоятки, взял-бы медную, стальную или алюминиевую толстую проволоку такого-же диаметра, как винтики и отверстия, кусачками или ножовкой сделал-бы из них 3 заклепки, скрутил гайки, вынул винтики и приклепал-бы обе створки уже не с одной, а с обеих сторон рукоятки-хвостовика.
"The individual might be marking and drilling in that specific manner due to personal preference or familiarity with the process. Your alternative method using tape to mark hole positions symmetrically and then securing them with rivets is indeed a practical approach that ensures precision and alignment. Each craftsman may have their preferred techniques based on experience and convenience."
Thanks for watching! Hope you like this product. 😊 Glad you enjoyed it! Try it and share your results! 💪 The ingredients are pretty easy to find, you can find them at your local store. Thanks for your feedback! Will try to improve in the next video. 🙏
"Haha, thank you for sharing your interesting opinion! The smell of bones really has its own charm that can surpass even famous perfumes. I'm glad you watched the video and hope you will continue to accompany the channel to discover many other interesting things!"
Thanks so much! Glad you liked how it turned out! 😊 The handle does have a nice feel-wish I could pass it through the screen for you to try. ❤ Appreciate the kind words!
"Thank you very much for your compliment! I'm glad that my video can bring you interest and help you understand more about the process of making knife handles from buffalo horn. If you have any questions or want to see more similar videos, don't hesitate to share your comments!"
"Very cool! The addition of the sealed material between the style and the buffalo horn handle not only increases the durability but also makes the knife handle more sturdy and beautiful. Buffalo horn is a very durable and aesthetically pleasing material, so combined with the sealed material, it will create a great product. Thank you.
Спасибо за демонстрацию. Но...Вместо того, чтоб из широкой части рога сделать накладку на пятку лезвия, типа гарды, её (накладку) ставят наоборот и с геройскими усилиями стачивают до почти удобного размера. Почти - потому, что мизинец всегда короче указательного пальца. И вся эта процедура занимает значительно больше времени, чем 5мин. , в том числе благодаря такому расположению. Но, это моё, личное, мнение. Обоснованные возражения принимаются, выслушиваются и анализируются. 😉
"Thanks for sharing your detailed perspective! You make an excellent point about the overlay placement and the challenges it brings. It’s true that adapting the shape for ergonomic differences, like finger length, could improve comfort and practicality. The time factor you mentioned is also something worth reconsidering-perhaps there's a more efficient approach to achieve the same result? Your insight definitely adds value to the conversation, and I appreciate the constructive critique! 😊"
@@Inventor365-d6z Благодарю за внимание к моему коменту и понимание, что он не просто придирка, а попытка улучшить эргономичность (удобство хвата) ножа, а, так же, поиск способов упрощения и ускорения самого процесса изготовления накладок.
"Thanks for your compliment! I'm glad you found the video helpful. I hope you'll continue to support me and find more interesting content in the next videos! 😊"
Thanks for watching! Hope you like this product. 😊 Glad you enjoyed it! Try it and share your results! 💪 The ingredients are pretty easy to find, you can find them at your local store. Thanks for your feedback! Will try to improve in the next video. 🙏
You should always use a segmented blade to cut horn, but not antlers. Ive worked with enough of it to know that its also best to soak it for a day or 2 before working it. Its a hair is all a horn is. Ask a scientist and they will tell you its a modified hair and so is nails.
Great advice, thanks for sharing your expertise! Soaking the horn beforehand makes a lot of sense to make it easier to work with. And the fact that horn is essentially modified hair-fascinating stuff! Nature’s designs never cease to amaze. Appreciate the tip about segmented blades too!
nice work.. but I would have thought you'd retain the looks of the horn a bit.. it turned out to be all black and perhaps not very clear that it was a horn?
Thank you for your feedback! I understand your point-retaining the natural look of the horn could definitely add more character. I'll keep that in mind for future projects. Your input is much appreciated!
Yes I agree, the finished product was very beautiful, but I likewise would have thought you would've kept some characteristics of the horn especially for the gripping standpoint ,the natural horn feel probably would have added more gripping feel and power so it wouldn't slip out of your hand
You heat and press about 400 degree F to 450 to make two flat flanks then shape it , I guess it make mutch ezeey . use the bigger end of the horn is better for this work
"Thanks for sharing! As you said, hot pressing and pressing the horn at 400 to 450 degrees F will help create curved edges and easy to shape. Using the horn tip is really a great choice when making knife handles, as it provides a stronger material and is easier to work with. Looking forward to your continued follow up and packaging.
Thanks for your question! Rest assured, all materials used in my projects are ethically and legally sourced. I always strive to respect nature and follow the regulations. Let me know if you have any other concerns!
"Thank you very much for your feedback! I will pay more attention to choosing suitable music so that everyone can have a better video viewing experience. If you have any ideas,
Гмм... А почему, именно - рог буйвола?.. Есть эбонит, поликарбонат, акрилл, дерево... Технологично - ничего нового. Работа рядового слесаря. Берёшь и делаешь. Ценность ножа, проявляеться - в качестве стали. Вот это - работа мастера.
"Thank you! Steel quality is important, but buffalo horn handles offer a natural beauty, warm hand feel, and traditional value that other materials can't match. We look forward to hearing more from you!"
"Yes, the python was a bit of a pain to cut, but when you see the finished product, it's worth it! Thanks for complimenting the knife, I'm glad you like it!
Thank you for watching the video. Everyone has their own perspective, and I am always willing to share my passion. I hope you understand more about the value of this craft.
You're absolutely right-the smell from working on horn or similar materials can be something else! Definitely not the most pleasant part of the process, but it's all part of the craft. A good ventilation setup makes it a bit more bearable!
"Thank you for your interest in video quality! I always try to improve and bring the best content to you. I hope you will continue to support and give feedback to help the channel become more and more complete! 😊"
Totally get where you're coming from-there’s definitely something special about leaving the horn in its natural state. Sometimes less is more when it comes to showcasing the beauty of raw materials. Appreciate your passion for preserving it!
Honestly you couldn’t have used the wrongest tool ever to cut the horn! A hack saw wouls have done a way better job without burning the horn… why you have left the tip of the horn which is on the way of the blade?
Thanks for sharing your opinion! 😊 It is true that each tool has its own advantages and disadvantages when working with horns. I chose this method to suit the process and available tools, but would definitely consider using a hacksaw to avoid danger
Cảm ơn bạn đã quan tâm và để lại bình luận! Việc làm cán dao từ sừng trâu không chỉ mang lại một sản phẩm đẹp và độc đáo mà còn thể hiện sự kết hợp giữa nghệ thuật thủ công và chất liệu tự nhiên. Sừng trâu có độ bền, chắc chắn và các vân tự nhiên tạo nên vẻ đẹp riêng biệt cho mỗi con dao. Hy vọng bạn sẽ tiếp tục theo dõi và ủng hộ những sản phẩm mà tôi làm ra từ sừng trâu. Nếu có bất kỳ câu hỏi nào, đừng ngần ngại chia sẻ nhé!
Entendo seu ponto, e é verdade que o trabalho artesanal pode levar bem mais tempo do que parece nos vídeos. Talvez tenha sido uma simplificação para apresentação, mas concordo que a transparência valoriza ainda mais o talento e o esforço do artesão. Obrigado por compartilhar sua opinião!
Eu gostei da segurança que ele tem com uma ferramenta sem o protetor do disco 😂😂😂😂e sem luvas esse sabe ser proficional encinando o povo como ter segurança no trabalho kkkkkkk
"Thank you so much for the compliment! I'm glad you found the video helpful. I hope you'll continue to support me and find more interesting content in the next videos! 😊"
"Thank you for sharing! I'm sorry about the problem at 6:58, I will take note and improve in the following videos. Hope you will continue to follow and support the channel! 😊"
"Thank you for your feedback! I will pay attention to improving the details to make the overall look more harmonious and beautiful. I hope you will continue to follow and support the channel! 😊"
اللهم صل و سلم و بارك على سيدنا محمد و على ٱله و صحبه أجمعين
عمل ممتاز جدا واصل هذا الجهد الكبير
Incrivel gamei
thankyou
Parabéns pelo trabalho muito bom
thank you
А почему он размечает и сверлит именно так? Ведь могут не совпасть расположения отверстий. Вот я, например, сначала скотч-тэйпом прикрепил- бы в двух местах, там, где нет отверстий, две симметрично сложенные роговые створки к хвостовику-рукоятке ножа с одной стороны, чтобы были видны отверстия. Потом просверлил одно отверстие всборе, пакетом и сразу вставил в него подходящий винтик и закрутил на него гайку. Потом просверлил-бы второе отверстие и в него тоже сразу вставил-бы винтик и закрутил на него гайку, чтобы держалось. Затем просверлил-бы третье отверстие, начиная со стали, в обеих роговых створках. Но третий винтик я не вставлял-бы. Потом я срезал-бы весь скотч-тэйп с рукоятки, взял-бы медную, стальную или алюминиевую толстую проволоку такого-же диаметра, как винтики и отверстия, кусачками или ножовкой сделал-бы из них 3 заклепки, скрутил гайки, вынул винтики и приклепал-бы обе створки уже не с одной, а с обеих сторон рукоятки-хвостовика.
"The individual might be marking and drilling in that specific manner due to personal preference or familiarity with the process. Your alternative method using tape to mark hole positions symmetrically and then securing them with rivets is indeed a practical approach that ensures precision and alignment. Each craftsman may have their preferred techniques based on experience and convenience."
Muy buena empuñadura felicidades 👌
Thank you. Where are you from?
In 5 minutes, this man created an extraordinary craft, a knife full of buffalo horn. AMAZING!
Thanks for watching! Hope you like this product. 😊
Glad you enjoyed it! Try it and share your results! 💪
The ingredients are pretty easy to find, you can find them at your local store.
Thanks for your feedback! Will try to improve in the next video. 🙏
❤ hello frieand
😅
Запах кости в 100 раз превосходит Шанель!!!!!
"Haha, thank you for sharing your interesting opinion! The smell of bones really has its own charm that can surpass even famous perfumes. I'm glad you watched the video and hope you will continue to accompany the channel to discover many other interesting things!"
brilliant idea! great sound and picture quality! so much knowledge in an 8 minute video! thanks for sharing it!
Glad you enjoyed it!
I can't believe it, you can make a knife handle from a buffalo hoỏn , good job video nice
@@TrungTranngoc-hs8zz yes
Nice👍
thank you
This was so satisfying to watch
Thank you so much! I'm glad you enjoyed it. Your feedback motivates me to keep creating more satisfying content. Stay tuned for more
Real well done mate, I can see how it looks, beautiful but I wish I could hold the handle, I bet feels nice ❤
Thanks so much! Glad you liked how it turned out! 😊 The handle does have a nice feel-wish I could pass it through the screen for you to try. ❤ Appreciate the kind words!
Good work tank you
"Thank you for your encouragement! I will continue to try to do better. Hope you will always accompany and support the channel! 😊"
Good job
thankyou Thanks for watching! Hope you like this product. 😊
Glad you enjoyed it! Try it and share your results! 💪
un vero artista bravo e grazie
"Thank you very much for your compliment! I'm glad that my video can bring you interest and help you understand more about the process of making knife handles from buffalo horn. If you have any questions or want to see more similar videos, don't hesitate to share your comments!"
excelente! I will only add some sealer between the blade and the handle
"Very cool! The addition of the sealed material between the style and the buffalo horn handle not only increases the durability but also makes the knife handle more sturdy and beautiful. Buffalo horn is a very durable and aesthetically pleasing material, so combined with the sealed material, it will create a great product. Thank you.
Спасибо за демонстрацию. Но...Вместо того, чтоб из широкой части рога сделать накладку на пятку лезвия, типа гарды, её (накладку) ставят наоборот и с геройскими усилиями стачивают до почти удобного размера. Почти - потому, что мизинец всегда короче указательного пальца. И вся эта процедура занимает значительно больше времени, чем 5мин. , в том числе благодаря такому расположению. Но, это моё, личное, мнение. Обоснованные возражения принимаются, выслушиваются и анализируются. 😉
"Thanks for sharing your detailed perspective! You make an excellent point about the overlay placement and the challenges it brings. It’s true that adapting the shape for ergonomic differences, like finger length, could improve comfort and practicality. The time factor you mentioned is also something worth reconsidering-perhaps there's a more efficient approach to achieve the same result? Your insight definitely adds value to the conversation, and I appreciate the constructive critique! 😊"
@@Inventor365-d6z Благодарю за внимание к моему коменту и понимание, что он не просто придирка, а попытка улучшить эргономичность (удобство хвата) ножа, а, так же, поиск способов упрощения и ускорения самого процесса изготовления накладок.
Он думал 5 минут,потом взял и испортил рога
@@ТоляВиноградов-ж8ъ Спасибо! Теперь я понял, какие, именно, 5мин. имелись в виду в заглавии! 😉😁
Legal demais
Thank you!
5 дней , 5 часов и 5 минут
15' thankkiu
удачное применение.
"Cảm ơn bạn rất nhiều! Sự giúp đỡ của bạn chính là động lực để mình cố gắng hơn nữa. 😊"
Nice
Thanks
Outstanding, sir!
"Thanks for your compliment! I'm glad you found the video helpful. I hope you'll continue to support me and find more interesting content in the next videos! 😊"
I can't believe it, you can make a knife handle from a buffalo horn 0:08
Thanks for watching! Hope you like this product. 😊
Glad you enjoyed it! Try it and share your results! 💪
The ingredients are pretty easy to find, you can find them at your local store.
Thanks for your feedback! Will try to improve in the next video. 🙏
It is one of the most used natural material for knives handles: why u see it as incredible?
شغل يابانى
Thank you
Sangat mantap.. 👍👍
Thank you so much! 😊 Glad you like the video and what I do! If you have any more ideas or tips, feel free to share! 👍✨
i can smell this video
"Isn't the 'buffalo horn smell' so real that it even comes through the screen? 😂 Thank you for watching the video n
You should always use a segmented blade to cut horn, but not antlers. Ive worked with enough of it to know that its also best to soak it for a day or 2 before working it. Its a hair is all a horn is. Ask a scientist and they will tell you its a modified hair and so is nails.
Great advice, thanks for sharing your expertise! Soaking the horn beforehand makes a lot of sense to make it easier to work with. And the fact that horn is essentially modified hair-fascinating stuff! Nature’s designs never cease to amaze. Appreciate the tip about segmented blades too!
Well, where die you buy the knife B4 starting to make the Horn suit?
On e-commerce platforms like Shopee, Lazada, or Tiki, you can search for suitable blades or rough knives for crafting.
nice work.. but I would have thought you'd retain the looks of the horn a bit.. it turned out to be all black and perhaps not very clear that it was a horn?
Thank you for your feedback! I understand your point-retaining the natural look of the horn could definitely add more character. I'll keep that in mind for future projects. Your input is much appreciated!
Yes I agree, the finished product was very beautiful, but I likewise would have thought you would've kept some characteristics of the horn especially for the gripping standpoint ,the natural horn feel probably would have added more gripping feel and power so it wouldn't slip out of your hand
You heat and press about 400 degree F to 450 to make two flat flanks then shape it , I guess it make mutch ezeey . use the bigger end of the horn is better for this work
"Thanks for sharing! As you said, hot pressing and pressing the horn at 400 to 450 degrees F will help create curved edges and easy to shape. Using the horn tip is really a great choice when making knife handles, as it provides a stronger material and is easier to work with. Looking forward to your continued follow up and packaging.
How much ?
1$
Did he acquire the horns legally?
Thanks for your question! Rest assured, all materials used in my projects are ethically and legally sourced. I always strive to respect nature and follow the regulations. Let me know if you have any other concerns!
@@Inventor365-d6z Oh, ok, good and thank you! Take care.
ОДНУ МИН. ДАЖЕ НЕ ПОСМОТРЕЛИ , ИЗ-ЗА МУЗЫКИ
"Thank you very much for your feedback! I will pay more attention to choosing suitable music so that everyone can have a better video viewing experience. If you have any ideas,
Гмм... А почему, именно - рог буйвола?.. Есть эбонит, поликарбонат, акрилл, дерево... Технологично - ничего нового. Работа рядового слесаря. Берёшь и делаешь. Ценность ножа, проявляеться - в качестве стали. Вот это - работа мастера.
"Thank you! Steel quality is important, but buffalo horn handles offer a natural beauty, warm hand feel, and traditional value that other materials can't match. We look forward to hearing more from you!"
Problema é
Achar chifres😅
hihi, horns at the buffalo meat shop
5 minuto kkkkk o vídeo tem .8.15 estranho né kkkk
"It's a bit of a blur, isn't it 😂 An Rest assured, every minute of the video is worth watching! Thanks
Ни хирасе 5 минут
thanhk you
I'll bet that cut off stunk.
"Absolutely, the smell from cutting horn is no joke! Definitely one of those moments where good ventilation or working outdoors is a lifesaver!"
@@Inventor365-d6z I make powder horns. Kind of used to it but still nasty.
That's gotta smell so bad when cutting the horn. Nice finished knife.
"Yes, the python was a bit of a pain to cut, but when you see the finished product, it's worth it! Thanks for complimenting the knife, I'm glad you like it!
So much sarcasm these days lmao
Thank you for watching the video. Everyone has their own perspective, and I am always willing to share my passion. I hope you understand more about the value of this craft.
@Inventor365-d6z I enjoyed every second
Какая вонь стоит после такой работы....
What a stench there is after such work...
You're absolutely right-the smell from working on horn or similar materials can be something else! Definitely not the most pleasant part of the process, but it's all part of the craft. A good ventilation setup makes it a bit more bearable!
Calidad
"Thank you for your interest in video quality! I always try to improve and bring the best content to you. I hope you will continue to support and give feedback to help the channel become more and more complete! 😊"
普通に木でよくね？
no it is buffalo horn
It is a DAMNED SHAME THEY ARE CUTTING WAWAY ALL OF THE HORN MATERIAL!!!!!!! SHOULDA LEFT IT ALL NATURAL!!!!!
Totally get where you're coming from-there’s definitely something special about leaving the horn in its natural state. Sometimes less is more when it comes to showcasing the beauty of raw materials. Appreciate your passion for preserving it!
Honestly you couldn’t have used the wrongest tool ever to cut the horn! A hack saw wouls have done a way better job without burning the horn… why you have left the tip of the horn which is on the way of the blade?
Thanks for sharing your opinion! 😊 It is true that each tool has its own advantages and disadvantages when working with horns. I chose this method to suit the process and available tools, but would definitely consider using a hacksaw to avoid danger
Thank you for your detailed comments, hope you continue to follow and share.
The description stated a knife made entirely from buffalo horn. BS😢
Cảm ơn bạn đã quan tâm và để lại bình luận! Việc làm cán dao từ sừng trâu không chỉ mang lại một sản phẩm đẹp và độc đáo mà còn thể hiện sự kết hợp giữa nghệ thuật thủ công và chất liệu tự nhiên. Sừng trâu có độ bền, chắc chắn và các vân tự nhiên tạo nên vẻ đẹp riêng biệt cho mỗi con dao. Hy vọng bạn sẽ tiếp tục theo dõi và ủng hộ những sản phẩm mà tôi làm ra từ sừng trâu. Nếu có bất kỳ câu hỏi nào, đừng ngần ngại chia sẻ nhé!
Misleading topic👎
"Thank you for your feedback. If the topic seems misleading, please let us know how we can improve it to better convey the intended message."
Demorou muito mais de 5 minutos. Não sei pra que anunciar a obra de um artesão com uma mentira totalmente desnecessária
Entendo seu ponto, e é verdade que o trabalho artesanal pode levar bem mais tempo do que parece nos vídeos. Talvez tenha sido uma simplificação para apresentação, mas concordo que a transparência valoriza ainda mais o talento e o esforço do artesão. Obrigado por compartilhar sua opinião!
Wich animal hat to die for this ?
A buffalo
♡♡
🎅🍀🐖
from Austria
Mosquitoes are often mentioned as vectors of dangerous diseases such as malaria, dengue fever, and many others.
Eu gostei da segurança que ele tem com uma ferramenta sem o protetor do disco 😂😂😂😂e sem luvas esse sabe ser proficional encinando o povo como ter segurança no trabalho kkkkkkk
"Thank you so much for the compliment! I'm glad you found the video helpful. I hope you'll continue to support me and find more interesting content in the next videos! 😊"
where did you get the bare blade please ?
I bought it at online store
At 6:58 you just ruined it.
"Thank you for sharing! I'm sorry about the problem at 6:58, I will take note and improve in the following videos. Hope you will continue to follow and support the channel! 😊"
Хрень полная😢😂
Sorry to hear you feel that way! Care to share what specifically didn’t work for you? Feedback is always welcome!
La cagaste con cortar la parte de atras, quedaba mucho mas lindo entero de menor a mayor...!
"Thank you for your feedback! I will pay attention to improving the details to make the overall look more harmonious and beautiful. I hope you will continue to follow and support the channel! 😊"
,🙋🫲👍👏
thankiu
Bhai apka number milega
Can you explain more clearly what "apka number" means? If you need specific information or help, I'd be happy to help! 😊