Wow Oleg, I appreciate your videos because you show every step that you take in your builds. I like the use of bare metal foil and your turned gear shifter. Thanks for sharing buddy!
Superb. I love the dials on the dash. I may have to pinch that one. I have 2 Martini ones in my stash. I would like to build a RAC version with the narrow tyres. I remember watching it in 1986
Solid work. Really like the bare metal surfacing here - I can take that right to aircraft work, cheers. Happy New Year, Oleg! And best to the support team.
I, m triying the same model, but don't have your hands bro, amazing👏👏👏, one off my sprays are brocken and my grey copckit is a bad pinture..., nice job
That is amazing attention to detail, which really makes it look unreal. You can definitely make a low quality made kit look absolutely amazing, not saying that this one is low quality, I'm just making an example but, you should make a low quality, cheap model kit into something amazing. Keep working and bringing good content!
Can you please tell me more infos about the vent tube on the right side of the cockpit? I’m building this model and it is the first time i see that tube
hi man, this tube made of shrink tube and as reference i used this pic deltateam.kuvat.fi/kuvat/LANCIA+DELTA+S4++Miki+Biasion++San+Remo+car+1986.+++Owner+Juha+Kankkunen/WP_20170618_10_02_11_Pro.jpg
excellent build and a great eye for the detail. Doing the fabric through the seatbelt buckels always drives me up the wall as the ends of the Fabric always seem to frizzle out and you wont get them through the hole. Any tips here?!
thank you mate. yes there are solutions: 1. just cut the belt with new sharp blade. 2. melt a little the ends with lighter, but be very accurate. 3. drop little superglue at the ends.
@@Scaleautoshop I have looked for the metal details but cannot seem to find them. I was doing an apache and wanted to add those metal elements. What source do you use to order them?
как увидел как вы масштабируете толщину руля сразу подписался, ещё хотелось чтобы на фронтальном обтекателе радиатора перед фарами также убрать толщину для масштаба.Скажите вы сами из России ?
Спасибо за подписку👍 дааа, там много мест где можно убрать масштабность, например, на сетках я старался убрать эту толщину где это максимум возможно. На обтекателе пропустил.. ) Да, сам я из России:)
I am absolutely amazed with your skill, patience, focus, and talent.
Thanks Drew!
what a epic work ...very well done as always ...
Thanks again my friend
Wow Oleg, I appreciate your videos because you show every step that you take in your builds. I like the use of bare metal foil and your turned gear shifter. Thanks for sharing buddy!
Glad you like this work James, and i wish you happy new year ! 🤝👍
Really nice use of bare metal foil. Makes the interior pop! Great job.
Thank you! Cheers!
Simply amazing
Thanks a lot 😊
You are one of my favourite model RUclipsrs. The detail is unreal mate, very well done.
Thanks Daniel that you are here👍🤝
Yes I so love your eye for details ! Even the tiniest of things! Thank s for toning the audio down
You are so welcome as usual ! :)
Great, as always 👍
Take care
Ray
Thanks Ray and a happy new year !
@@Scaleautoshop Thanks',
happy new year to you and your loved one
Ray
Superb. I love the dials on the dash.
I may have to pinch that one.
I have 2 Martini ones in my stash. I would like to build a RAC version with the narrow tyres. I remember watching it in 1986
thanks for comment👍That would be cool! i dream about 1/12 MFH kit. they have also Lancia Martini.
Some amazing details going on. Especially liked the wires under the steering column and the radio cord. Astounding piece of work.
Glad you enjoyed it!
Fantastic workmanship. Your dexterity is a real gift. I hope you can keep those steady hands for many years to come!
thanks:) i hope they will serve me for a long time.
I love the way you take the ordinary and make it extraordinary. Just subscribed. I'm sure I'll take something away from your videos. Thank you
thankx mate, glad i help you with something
That is absolutely stunning. Phenomenal work!
Thank you so much 😀
Another great build. Some impressive detail work.
Glad you like it 👍🤝
Great building once again! A request: please give us more time to like at the final pictures. They are beautiful 😍
Thank you! Will do🙋
ohh man!!! That is a stunning work!!! I think after watching that video I am going to quit modelling and just watch you. Have a happy New Year!
no no, dont do it:) stay with us and make models. Thanks mate and a happy New Year too!
awesome detail, keep 'em coming!
Thanks, will do!
Solid work. Really like the bare metal surfacing here - I can take that right to aircraft work, cheers. Happy New Year, Oleg! And best to the support team.
Thanks Curtis, we wish you also a good and happy new year !
Amazing work!
Thanks a lot!
Wie immer klasse gemacht 👍😊 ich Bau morgen auch mein Cockpit zusammen, mal schauen ob das auch so gut aussehen wird wie deins 😊
Danke Benedikt, keine Zweifel wird deins gut aussehen👍
Beautiful work.
Thank you so much 😀
Stunning work welll done, bravo
Many thanks!
Bonjour , je viens de m'abonner tu as le soins de détail et toujours des astuces brillantes merci beaucoup c'est un régale pour les yeux .
merci d'avoir apprécié
I, m triying the same model, but don't have your hands bro, amazing👏👏👏, one off my sprays are brocken and my grey copckit is a bad pinture..., nice job
thanks friend ! try more and you will get what you want
@@Scaleautoshop thanks so much bro, and you make more amazing videos 👏👏👏💪💪💪
That is amazing attention to detail, which really makes it look unreal. You can definitely make a low quality made kit look absolutely amazing, not saying that this one is low quality, I'm just making an example but, you should make a low quality, cheap model kit into something amazing. Keep working and bringing good content!
Glad you like it and thanks for idea👍. For sure it would be a good topic to make something detailed from low quality kit.
Can you please tell me more infos about the vent tube on the right side of the cockpit? I’m building this model and it is the first time i see that tube
hi man, this tube made of shrink tube and as reference i used this pic deltateam.kuvat.fi/kuvat/LANCIA+DELTA+S4++Miki+Biasion++San+Remo+car+1986.+++Owner+Juha+Kankkunen/WP_20170618_10_02_11_Pro.jpg
Such an awesome build. Just curious why you put the tamiya cement in the seat holes at 1:38 when you finished cleaning them up?
hi man, thanks! this glue melts the remaining plastic flakes and makes the surface more smooth
Nice as always bro KUTGW oleg, 👍Keith
Thanks my friend 🤝🍻. What means kutgw ?
It means KEEP. UP. THE. GOOD. WORK. KUTGW FOR SHORT 👍👍
Pure magic.
thanks :)
excellent build and a great eye for the detail. Doing the fabric through the seatbelt buckels always drives me up the wall as the ends of the Fabric always seem to frizzle out and you wont get them through the hole. Any tips here?!
thank you mate. yes there are solutions: 1. just cut the belt with new sharp blade. 2. melt a little the ends with lighter, but be very accurate. 3. drop little superglue at the ends.
Magnifique !!!!
thanks a lot Ji Ji ✌
perfect details. Maybe I could do the same on a 1/3 scale .Maybe :D
1/3 scale? О_O what is it 😀
Fantastique !!!
thanks for watching:)
What color blue is that for the seats??
tamiya's sky blue i think.. X-14
Seems very light that color, can you please double check. I want to buy that color tomorrow for the 250 gto seats
@@Itech127 really i forgot. this can be also xf8 blue. i will mark all paints in next videos
Again a fantastic detailed work. I really like you videos. But is this model already finished? Just ask because you aleady work on the Senna
thanks mate. not yet finished, i work now on the engine.
Good job!! You would like to see my homemade 1/5 49cc RC car!
I'll check it out!
Where do you get the metal details?
this is detail up set, sold separatly
@@Scaleautoshop I have looked for the metal details but cannot seem to find them. I was doing an apache and wanted to add those metal elements. What source do you use to order them?
Супер!!!!!!
благодарю :)
And the fourth part? 🤷🏻♂️
i work hard about it :)
@@Scaleautoshop thank you, I will wait....
Mecojoni 👏👍
thanks :)
как увидел как вы масштабируете толщину руля сразу подписался, ещё хотелось чтобы на фронтальном обтекателе радиатора перед фарами также убрать толщину для масштаба.Скажите вы сами из России ?
Спасибо за подписку👍 дааа, там много мест где можно убрать масштабность, например, на сетках я старался убрать эту толщину где это максимум возможно. На обтекателе пропустил.. ) Да, сам я из России:)
なんと細かな作業！😖👍
どうもありがとうございました ：）
👏🏻👏🏻👏🏻
☜(⌒▽⌒)☞
👍❤❤❤❤
(☞ﾟヮﾟ)☞
😍😘👍 👋🇨🇭
Thank you :))