Watching ur videos on 2g speed frm 3 to 4 months, it helps me a lot, it takes time as it is 2g here..still learning...hope 4g will be restored here... Then I will more enjoy ur videos. Thank you
OMG Revit is so deep! I’ve been using it for 15 years but always found it counterintuitive - I’m discovering how to relieve my frustrations thanks to your videos. You’re doing great work here!
I've been watching your videos for a while now, they are quite useful for small doubts one may have. But i have to say I prefer this longer tutorial format because I can learn more things overall, instead of just looking for a small doubt. Congrats
OMG , i`ve been searching and practicing in how to make to metal deck and this is best way to make that , easy, quickly thanks for the video, have a nice day
Great Video , i think the structural floor should be separated from the finish layer , because at the end the structural elements will be replaced with the structure model as a link .
Hi mate thanks for your tutorials. Really helpful. you showed the way to raise any floor side/vertex but only about the upper floor surface. Can this be made also to the bottom surface vertices/sides?
Thanks for the useful video, if I make a ramp or road with slops and I use tail's finishing the slope line make it all to a big mess.Is there a way to fix and also hide the gradient lines?
I'm on a project now where I need to do this BUT instead of altering the top face, I need to do this on the bottom face of the slab. I want to pull a square peice down below the slab. This is going to end up as a sump. How do you work on the bottom face and not the top? Thanks.
Hi, If we divide the floor into parts and then apply new material into some area as you explained then, Will that affect the quantity of materials? As at the end we need material quantity.
how can I use 2 materials(finishes) on an interior side of a wall (8m), without having to create 2 individually joined walls? Say were 1 portion is the bathroom (4m) and Kitchen of (4m).
Is there a way to add a curb to the sloped sidewalk. Looks like Revit doesn't like to add a curb to a sidewalk/ floor that has modified grades. (sloped)
Thank you very helpfull sir . I have face a problem this is , reveal is provide in wall but not provide in floor edge thickness surface. Why does it possible sir
Can you tell us triangles at walls like facade. Modern designs of triangles?. Floors secret should be also in walls so we call make incredible walls or roofs.
Great tips. Can i use this to make folds(jumps) in slabs or the best thing is to model them as walls please? Also, is there away to make an invisible line type in Revit please?
I have a sloped floor and I want to place a car on it, when I do the front wheels are on the floor but the rear are not because the car perfectly vertical. I can rotate the car but is there an automatic way to place the car on the sloped floor?
Thanks a lot for the video, I'd like to add a question I made the division in the floor and I'm able to change materials however I also would like to delete some parts that overlap with the walls but revit doesn't allow you, how can I make it?
I created the different floor finish from one floor and got it to work great in 3D but when I look at my plan view in 2D it all still looks like one floor and I cant see the different floor types. Is there another step to be done or did I do something wrong?
balkan im commenting on this cuz its your recent post but will you ever do a site context model in revit tutorial? i need help getting good context model for my site and you've never done that
The best Revit Tutor on RUclips.
Watching ur videos on 2g speed frm 3 to 4 months, it helps me a lot, it takes time as it is 2g here..still learning...hope 4g will be restored here... Then I will more enjoy ur videos. Thank you
As someone who's learning revit to get a better job, thank you so much !
Id like to hear that you made it my dude.
OMG Revit is so deep! I’ve been using it for 15 years but always found it counterintuitive - I’m discovering how to relieve my frustrations thanks to your videos. You’re doing great work here!
Spent all day trying to cut a ramp into a floor slab, and you do it in two minutes, great videos, I’ve watched hours of them. Thank you
I've been watching your videos for a while now, they are quite useful for small doubts one may have. But i have to say I prefer this longer tutorial format because I can learn more things overall, instead of just looking for a small doubt. Congrats
the divide parts tool might be the handiest thing for a common style of project I do, thanks so much!
KEEP UPLOADING ADVANCED REVIT TUTORAIALS..IT HELPS TO CLEAR BASIC CONCEPTS WHICH ARE VERY HELPFUL IN WORKING IN LIVE PROJECT
..мощно, а я и забыл об этих штуках, особенно перекрытие по профлисту, спасибо!
Thankyou so much this is a really helpful tips for someone who's learning revit !
Dude! You Rock
OMG , i`ve been searching and practicing in how to make to metal deck and this is best way to make that , easy, quickly
thanks for the video, have a nice day
thank you so much for your tutorials. They were all very helpful for Revit beginners like me
Great Video , i think the structural floor should be separated from the finish layer , because at the end the structural elements will be replaced with the structure model as a link .
I also did that on my project..
Yedi Supriadi me too , I’m actually working in a company and we do that for all projects .
Thanks a lot for your simple and clear structured tutorials. It's a must have for all beginners.
Thank you two times, cuz its my second time I'am watching again
Really enjoyed that! I'm fairly new to revit and it came in very handy on a project I'm just doing. Thank you.
Thank you for sharing this structural tutorials Sir....good job
Simple and to the point. Thank you! May God bless you!
Guy, thank you so much! You always help us out a lot!
im learning from your vlogs. Thank You
Thank you very much! I'm making great strides in learning Revit, all thanks to you and your videos.
As always, brilliant, informative and straight to the point!
Amazing tutorial, thank you so much.
Fantastic your tutorials are awesome.
The last tip for floors was awesome!
I really appreciate your tutorials.
You are awasome.....the way you teach
Make a vedio on how to apply different materials with bump for various textures.
The first tip is very usefull for making sloped insulation on roofs
Ah you saved my life. THANK YOU
Great video! Thank you so much
Thank you for the video.
i like it , that was great demonstration
thank you
Another great video! 🤯
Thank you so much!... Your tutorials have been very useful to me...
Super cool, thanks Balkan Architect...
The create part tool is useful indeed but how can you schedule these different materials afterwards?
Thanks
Hello, when you watch the modified surface in 2D (plan view) it disappear! Any idea why?
very helpful lecture, thank you so much.
Thanks Balkan
This is so helpful, thank you so much!!
VERY HELPFUL VIDEO BALKAN SIR
Love from India.
Great stuff! Thank you.
Very very useful.
why you don't use Split Face (SF) to split the floor instead create and divide parts? it's easy and we can use it in case we have generic slab.
great as usual, Thanks
Hi mate thanks for your tutorials. Really helpful. you showed the way to raise any floor side/vertex but only about the upper floor surface. Can this be made also to the bottom surface vertices/sides?
Amazing trick
Thanks for the useful video, if I make a ramp or road with slops and I use tail's finishing the slope line make it all to a big mess.Is there a way to fix and also hide the gradient lines?
Thanks
Very Good Information
Cool. Great video once again!
Hey Balkan! Can you do a video on control joints in floor slab?
I'm on a project now where I need to do this BUT instead of altering the top face, I need to do this on the bottom face of the slab. I want to pull a square peice down below the slab. This is going to end up as a sump. How do you work on the bottom face and not the top? Thanks.
Hi,
If we divide the floor into parts and then apply new material into some area as you explained then, Will that affect the quantity of materials? As at the end we need material quantity.
Would you show us how to deal with terrace wooden deck ? Thank you.
Thanks, Hope you all study efficiently
Very interesting thx a lot
Very helpful and strong Video
PLEASE MAKE A VIDEO ABOUT DETAILING Concrete STAIRS
Thanks Good tutorial as usual
nice tutorial bro, but i still dont understand what is the different between architectural floor and structure floor in revit?
you good, thanks for sharing your knowledge
How about editing the curb at the handicap ramp. Is there an easy way to slope the curb to match the bottom of the ramp?
how can I use 2 materials(finishes) on an interior side of a wall (8m), without having to create 2 individually joined walls? Say were 1 portion is the bathroom (4m) and Kitchen of (4m).
And what with a curb near the ramp?
you are top notch
U r genius for me
Is there a way to add a curb to the sloped sidewalk. Looks like Revit doesn't like to add a curb to a sidewalk/ floor that has modified grades. (sloped)
Hi, how do I create a vaulted triangle concrete flooring? I will the floor has a free span. Thank you.
Thank you. Good video.
Thank you very helpfull sir . I have face a problem this is , reveal is provide in wall but not provide in floor edge thickness surface. Why does it possible sir
Can you tell us triangles at walls like facade. Modern designs of triangles?. Floors secret should be also in walls so we call make incredible walls or roofs.
if you wanted to use this method for finish plans, how would you tag your floors?
Thank you!
Really useful video
Hi, can u make a video of Gravity wall with foundation in different heights using family and its parameter.
Great tips. Can i use this to make folds(jumps) in slabs or the best thing is to model them as walls please?
Also, is there away to make an invisible line type in Revit please?
I have a sloped floor and I want to place a car on it, when I do the front wheels are on the floor but the rear are not because the car perfectly vertical. I can rotate the car but is there an automatic way to place the car on the sloped floor?
amazing skills
My floors show on the exterior as a line. How do you remove the lines?
Amazing Thanks!
Great Video!!
thank u very much
Haw to make a tage that show you
Floor composition and thinness of every layer
i do floor plan material following this tips, but i cant see any change in floor plan ( i can see the change when in 3dview)
Pile, vrlo dobro
I have a Revit LT license, modifying floor slabs is one annoying tool that's not included.
Anyone knows what's the best way to do a metsec floor in Revit?
Is there a profile or something?
excellent!
I'm not able to align floor pattern once the floor is being divided? Anyone has a suggestion?
Thanks a lot for the video, I'd like to add a question
I made the division in the floor and I'm able to change materials however I also would like to delete some parts that overlap with the walls but revit doesn't allow you, how can I make it?
Can I make a Floor, but as a wall, whit the metal deck so it looks wavy?
I created the different floor finish from one floor and got it to work great in 3D but when I look at my plan view in 2D it all still looks like one floor and I cant see the different floor types. Is there another step to be done or did I do something wrong?
balkan im commenting on this cuz its your recent post but will you ever do a site context model in revit tutorial? i need help getting good context model for my site and you've never done that
Excellent.. !!!!
Can I change different floor finish thickness straightaway ?
after dividing the floor in parts how can i merge it in a single floor again?