Qodarullah lumayan ribet, tak pikir ojh iya banyak pipa besar sisa renov, ehh perlu pvc sheet pula 😁 Mungkin kali ini aku beli aja lampu tembok kaya gini, tapi terimakasih ide dan tutorialnya..
I think it would be a fun build. I also know that half of this is things that you could use that are already built for one thing I did not like about the unit was there is no vent for heat dissipation I think eventually on a summer evening not in the winter this lamp would end up sagging because it could melt from the trapped heat. Edit: props to the curator for getting on here and corrected me. That’s awesome. I’m sorry I missed that. Also, for the other suggestion are using low volt lighting that’s a perfect suggestion.
It's not the plastic sagging I'd worry about (low power led unlikely to reach such temperatures) but the overheating of the driver and LEDs in the lamp, which will decrease their lifetime. Particularly since it's a pseudo-edison design lamp that is used where cooling is already very poor by design. Having holes will not help much since while hot air rises up, cold air has to come in from somewhere to provide efficient cooling, and I just don't see where it's going to enter. So the bulb will be cooking inside. The only objective way to test it is to let it run for some time, take the lamp out (very fast so it doesn't have time to cool), remove the lamp cover (glass or plastic) and check the temperature of the LEDs with a sensor/thermal imager. Checking driver temperature would be even trickier. So I guess nobody is ever going to do that. Well, good luck having to change light bulbs now and then.
Saran telat nih om,Pvc ke pvc mending pake pvc cement om lebih kuat dibanding pake powerglue,apalagi kan lama2 panas bisa cracking sambungan powergluenya kalo pake pvc cement kan meleleh pvcnya bisa dibilang nyambung jadi 1,kalo untuk kaca ke pvc saya kurang paham😂
Подобное стоит примерно 2 доллара. Столько времени и причём на много дороже выходит своими руками. И к тому очень простое исполнение. Если только радость в том, что главное своими руками.
есть вентиляция, на 9-й минуте сделал 2 отверстия для вентиляции, чтобы горячий воздух от лампы мог выходить. для лампы я использую винтажный светодиод мощностью 2 Вт. Спасибо
This is a brilliant build, my only concern would be mounting it onto a wall or any surface, maybe the mounting bracket that should be used could be made out of aluminum flat bar, just to give it extra strength
@@asaljdsimplecraft2917NN models in UK loo the u. Uyh hm nn JJ j. Mk Kim K uni i JJ JJ mm mm mm Jeff and jit 😂ko oo o How to ko i ko run Mm mm mm mi I'll blo ok k NN gno o ko ui up iu i ok mt kulang damge. Hm mo I'm. Inn JJ jloo ko I'm
ненадежно как-то, но недолгое включение, думаю, переживет, в целом - смотрится отлично! немного бы усовершенствовать - на спрятанной в трубе части банки что-то типа фольги приклеить, чтоб получилось подобие светоотражайки. это даст немного больше света и визуально чуток красивше будет.
Tenang bang tetap lanjutkan berkreasi.. Komentar memang Diisi 2 Type orang Orang Pinter yang Nonton Berterimakasih Dapet Ilmu dan lanjut Prakter Orang T*l*l yang Cuma bisa Menghujat
Thank you for sharing this useful video
Kereeen.. Liat komentar nya. Banyak org luar yg nonton+komen. Mantaf
terima kasih
Alhamdulillah menemukan channel yang kreatif & sangat bermanfaat
Terima kasih banyak Bang
Berkah & sukses selalu buat semuanya 🎉🎉🎉
Kreatip sekali, bagus hasilnya pula
*Ide yg sangat menarik sekali cantik elegan dan mantap*
Terima kasih 🤗
istimewa pokoknya ide2 nya bang👍👍👍
Semoga bermanfaat
Qodarullah lumayan ribet, tak pikir ojh iya banyak pipa besar sisa renov, ehh perlu pvc sheet pula 😁
Mungkin kali ini aku beli aja lampu tembok kaya gini, tapi terimakasih ide dan tutorialnya..
Wow keren idealis banget Bang. Tutorial cara membuat lampu dinding unik. Terima kasih ilmunya 👍🙏
terima kasih
@@asaljdsimplecraft2917 unik dan modern 👍🙏❤
Luar biasa kreatifitas yg tinggi1👍👍👍sukses sllu
terima kasih
Mantap sekali lampu dinding nya bang👍
terima ksih kawan
Trima kasih kak telah berbagi tutornya semoga berkah buat kakak 🙏
Terima kasih juga ya
Excelente! Fiz e ficou muito bom. Não aquece nadinha. Parabéns! Continue postando vídeos,você é muito talentoso. Obrigado mesmo.
Terimakasih banyak sudah berkenan membagi ilmunya om 🙏🏽 ini sangat berguna
terima ksih
Hasil kerasi yg menakjubkan..
terima kasih
Keren, selalu tercipta kreasi baru yg menginspirasi...👍🙏
terima kasih om
Keren, hanya pake pralon bisa bikin lampu yg elegan
terima kasih
Terimakasih telah berbagi tautan 👍🙏
Semoga bermanfaat
Haha mantap benerrr.beli alat bor nya aja dah jutaan blom pilox.lem. blom skrupnya.mendingan beliaja dah paling 100rupe
bener om. tp kita buatnya bukan ini aja. dan ada kepuasan jg
Mantap idenya mas brow. Trims ilmunya
Terima kasih kembali
Wah keren makasih tutorial nya
Makasih juga
Keren mantap kreatif.
terima ksih
Mantap bang... Idenya luar biasa ..
terima kasih
mantabbb mase..👌
terima kasih
Wow so cool
You know lm a businessman after your video 🎉🎉🎉🎉🎉❤
masya allah.....🙏🙏🙏
bermanfaat banget...
terima kasih
Kreatif bgt mas...!!! 👍
terima kasih
Harus banget dukung konten kek gini sih😄
Terimakasih ide dan ilmunya kak, pengen buat juga.
Semoga menginspirasi
Такой светильник только в деревянном-деревенском туалете ставить.
Beatiful nice idea.
thanks bro.
Mantap bg sukses terus
Salam sukses juga
Very creative congratulations amigo
thanks
I think it would be a fun build. I also know that half of this is things that you could use that are already built for one thing I did not like about the unit was there is no vent for heat dissipation I think eventually on a summer evening not in the winter this lamp would end up sagging because it could melt from the trapped heat.
Edit: props to the curator for getting on here and corrected me. That’s awesome. I’m sorry I missed that.
Also, for the other suggestion are using low volt lighting that’s a perfect suggestion.
Me personally, I would do this build with a low voltage LED circuit to decrease the chances of a fire. ( and I would use PVC cement not superglue)
thank you, in the 9th minute video I made 2 holes for the heat of the lamp. thank you
It's not the plastic sagging I'd worry about (low power led unlikely to reach such temperatures) but the overheating of the driver and LEDs in the lamp, which will decrease their lifetime. Particularly since it's a pseudo-edison design lamp that is used where cooling is already very poor by design.
Having holes will not help much since while hot air rises up, cold air has to come in from somewhere to provide efficient cooling, and I just don't see where it's going to enter. So the bulb will be cooking inside.
The only objective way to test it is to let it run for some time, take the lamp out (very fast so it doesn't have time to cool), remove the lamp cover (glass or plastic) and check the temperature of the LEDs with a sensor/thermal imager. Checking driver temperature would be even trickier. So I guess nobody is ever going to do that. Well, good luck having to change light bulbs now and then.
@@BoraHorzaGobuchul he doing that only for video content.
Machine which is using for crafting ...what is called it ??
Great Work my friend
thanks
Excelente trabajo amigo 👌 gracias por compartir
Keren cara kerjanya. Semoga sukses selalu 😇
Terima kasih
very very beautiful and classic
🥰
thanks
Wow Awosome very nice Welldon 👌👍💕👌
thanks
Nesse caso, teria que usar uma lâmpada que não esquente, senão vai derreter o PVC. Parabéns
Saran telat nih om,Pvc ke pvc mending pake pvc cement om lebih kuat dibanding pake powerglue,apalagi kan lama2 panas bisa cracking sambungan powergluenya kalo pake pvc cement kan meleleh pvcnya bisa dibilang nyambung jadi 1,kalo untuk kaca ke pvc saya kurang paham😂
Makasih masukannya
Luar biasa....keren bosq 👍👍❤
terima kasih om
Admiro esa creatividad y la paciencia que le pone para que el trabajo quede bien hechesito.
Подобное стоит примерно 2 доллара. Столько времени и причём на много дороже выходит своими руками. И к тому очень простое исполнение.
Если только радость в том, что главное своими руками.
Lanjutkan berkreasi bang👍🤝☕
terima kasih
Проблема будет видна позже. Такой пластик не рассчитан на такой температурный режим
И ни какой вентиляции не предусмотрено, я думал будет хотя-бы светодиодный
Mas a lâmpada é em LED, produz pouco calor.
для освещения используйте светодиод и низкое напряжение, это будет более долговечно. Спасибо
есть вентиляция, на 9-й минуте сделал 2 отверстия для вентиляции, чтобы горячий воздух от лампы мог выходить. для лампы я использую винтажный светодиод мощностью 2 Вт. Спасибо
@@asaljdsimplecraft2917 где они эти отверстия? В ножке. А приток воздуха откуда?
I love creative people. Sometimes not having much make you make use of everything you have
Making this With the price of the materials ( pvc pipes ) is more expensive than buying one from the lighting store in my city
Very very nice 👍 bhai Saoa. Nice
thanks
Mantap, ingat pemirsah lem korea dan bor adalah koentji!
Terima kasih 🙂
Nungguin cara masangnya di dinding 🙊
cara pasag didinding gampang dibelakng adam model plat dengan 2 buah lubang. tks
Okay 👌👍.....
This is a brilliant build, my only concern would be mounting it onto a wall or any surface, maybe the mounting bracket that should be used could be made out of aluminum flat bar, just to give it extra strength
is there any concern about the heat trapped inside
Excelente trabalho 👏👏👏
رIaa Flow Flow tggtgt Flow Flow @# 3(1 1 2#5q
Waah! 👏👏
Mantul sukses sllu dan menjadi berkat bagi banyak orang..TUHAN berkati
terima kasih semoga bermanfaat
Love you're work, John from Ireland 👍
thanks
Good job 👍👍👍❤❤
Keep it up 💯💯❤❤
Keren,kreatif
terima kasih
Amazing work ❤❤ love from Nepal 🇳🇵
Terus berkarya ,semoga karya mu menjadi berkah untukmu dan untuk kita semua kawan🤲🤲
terima kasih
HI MY FRIEND YOUR WORK IS GREAT 👍
thanks
Keren, sangat menginspirasi, terus sukses...👍🙏
Terima kasih banyak
@@asaljdsimplecraft2917NN models in UK loo the u. Uyh hm nn JJ j. Mk Kim
K uni i JJ JJ mm mm mm
Jeff and jit 😂ko oo o
How to ko i ko run
Mm mm mm mi I'll blo ok k NN gno o ko ui up iu i ok mt kulang damge. Hm mo I'm. Inn JJ jloo ko I'm
Umm 🤔🤔🤔 I'm keeping up lang 😃 oo
Lmk I'll
Hoo.b
La
Mantaf 👍👍👍
Great 👍😃 nice bro
Keren hasilnya 👍
Terima kasih 🤝
@@asaljdsimplecraft2917 ⁹
ненадежно как-то, но недолгое включение, думаю, переживет, в целом - смотрится отлично! немного бы усовершенствовать - на спрятанной в трубе части банки что-то типа фольги приклеить, чтоб получилось подобие светоотражайки. это даст немного больше света и визуально чуток красивше будет.
Лампа накаливания а вентиляции никакой. Сувенир не для пользования😊
Tenang bang tetap lanjutkan berkreasi.. Komentar memang Diisi 2 Type orang
Orang Pinter yang Nonton Berterimakasih Dapet Ilmu dan lanjut Prakter
Orang T*l*l yang Cuma bisa Menghujat
Уважуха за старание, все отлично, но только краска + грунт (даже без учёта прочих материалов и расходников) = цене аналогичного готового изделия.
Согласен, если делать в единственном экземпляре. Но а грунта и краски штук на 10 хватит, а это уже башенная экономия
Muy bien trabajo felicitaciones 👌 me encanto la idea
Mari mencoba
Tinggal potong potong terus di lem jadi deh
selamat mencoba
Amazing idea
thanks
Wow keren
terima ksih
Kerennn bang 👍🏻
terima kasih
I like this idea
Congratulations. You are very criafive.
great work
Eres un artista,felicitaciones,por lo que no creo que debas ocultarte
All these times we're buying pvc and.. Used nutella jar??
Well played 👏
ⓦⓞⓦ
_Keren om, salam sukses selalu om_
Salam sukses juga om
That's very cool
thanks
RUCIKA, Air mengalir sampai jauh
wow keren skali
terima kasih
Best of Best 👍,
awesome job
Has a built-in slide dimmer as a bonusfeature!!!! Didn't anyone else see that????
i rather buy than waste too much time
Yes, it is true. Sometimes we like to make something even though it's cheap
There's differ between human. I'd rather do myself than wasting money. 😅
Vou fazer aqui no Brasil pra vender 😂🇧🇷
Deus te abençoe em nome de Jesus 🙏🏻
Pode ser um bom começo, pra quem quer começar seu próprio negócio.😮
thanks
Very beautiful, but with the heat of the spotlight and enclosed in the glass generates wet and can burn
don;t worry about the heat of the lamp in 9;13 minute I made 2 holes for the heat of the lamp. Thank you
بہت خوبصورت ❤❤
ماشااللہ😊
From Gilgit-Baltistan❤
Nice bro nice 👍
Ficou muito linda essa luminária 👏
Bisa jadi cuan ni bang.izin ya...
silakan bang smoga bermanfaat
Your designs are aethetic amazing 🔥
You are doing well 😊
Mantap bos
terima kasih bos
@@asaljdsimplecraft2917 sama- sama bang sukses selalu
excelente
The best part is it will never RUST!
Good work...make easier allowance for when you want to change the bulb
thanks
👍🏻👍🏻👍🏻super
Hermoso felicitaciones
Mantap bro 👍
makasih broo