OMG, it feels like you can read my mind. I was thinking of buying this station and I hoped I can find a good review, and here you are, amazing quality content as always.
I was thinking of buying this station for after watching this video you can see it struggles to put the power to the tip you can see on the display is very slow on the power or am I wrong on this.
@@ErCanEverything really? JBC is the world market leading in soldering irons and they have / had most patents used by this soldering station. The whole tip design was invented by JBC and later copied by Weller. They look super interchangeable, or better said an exact copy😉
Hello, Good review 👍 If you can check 2 more things? : - Is the station and/or the iron solder make noise ? (coilwhine/buzzing - like many Aixun one, and the JBC too) - Is the tip is properly grounded ? Or is there some voltage leaking with, for example, a grounded board ? Thanks ! 🙂
@@ErCanEverything Thank you for checking this ! Also, I have seen that the PSU is exactly the same as the "famous" Aixun T3A, so it seems the tip is not grounded (maybe have to pay attention with soldering grounded plugged PCB - I think there will be current leakage, and some sensible chips may be damaged)
I have some FNIRSI tools but its so odd, i have never bought directly from the FNIRSI official store. Lots of vendors sell FNIRSI tools and most of them are actually cheaper than the Official store.
Also, you can get official after-sales service if you buy it from the flagship store, but you can't get warranty from other dealers. I also noticed that if the product is defective, the other dealers don't care about you, while the official ones help with the matter.😊
@@ErCanEverything Yes, that is a good point. I always prefer to buy from the Official Stores but when I see what I want sold cheaper elsewhere, I can't stop myself, I buy it. I remember when I wanted to buy the FNIRSI spot welder. The official store advertised it and a launch date cause it was new and not yet available, yet other vendors were already selling the FNIRSI spot welder in their stores. Very strange. I also agree with you, FNIRSI quality is really good.
I bought one and it’s more like 20w not 200w. It’s slower as cheap t12 and has shorter thermal inertia than T12. Maybe are tips bad but it’s same on c245 and c215 which is delivered with that station. I don’t recommend to buy it.
Благодаря за схемата на окабеляването!
Нямаше нужда от това.
Благодаря ти Приятелю❤️🤝🤝🤝
OMG, it feels like you can read my mind.
I was thinking of buying this station and I hoped I can find a good review, and here you are, amazing quality content as always.
I'm so glad you enjoyed this video😊🤝🤝🤝
I got this model 2 weeks ago.
Its awesome 👍👍
Lots of power 👍
Not enough
@Optimiser113 ??
ErCan Everything, I'm addicted to your videos keep them flowing
Thank you very much and I try to keep up this pace😊
Awesome soldering station😊
Thank you my Friend 🙂🤝❤️
considering how t12 works with 65w this looks disapointing for c245 cartridge iron. but it has cradle sleep so thats cool
Yes it's disappointing.
I was thinking of buying this station for after watching this video you can see it struggles to put the power to the tip you can see on the display is very slow on the power or am I wrong on this.
As a JBC copy, do their solder tips work too?
I've never heard of JBC before, but they looks very similar.
When I measured the resistance of the F245 Tip it was aprox. 3.2 Ohm
@@ErCanEverything really? JBC is the world market leading in soldering irons and they have / had most patents used by this soldering station. The whole tip design was invented by JBC and later copied by Weller. They look super interchangeable, or better said an exact copy😉
@@ErCanEverythingJBC is the best soldering equipment in the world ....
Hello,
Good review 👍
If you can check 2 more things? :
- Is the station and/or the iron solder make noise ? (coilwhine/buzzing - like many Aixun one, and the JBC too)
- Is the tip is properly grounded ? Or is there some voltage leaking with, for example, a grounded board ?
Thanks ! 🙂
Yesterday I noticed that there is this noise, but it is barely audible😊
@@ErCanEverything Thank you for checking this !
Also, I have seen that the PSU is exactly the same as the "famous" Aixun T3A, so it seems the tip is not grounded (maybe have to pay attention with soldering grounded plugged PCB - I think there will be current leakage, and some sensible chips may be damaged)
@@ErCanEverything profe voltajes y corriente puede probar
I have some FNIRSI tools but its so odd, i have never bought directly from the FNIRSI official store. Lots of vendors sell FNIRSI tools and most of them are actually cheaper than the Official store.
I noticed this too, but I never investigated why.🤔
It's crap quality
Also, you can get official after-sales service if you buy it from the flagship store, but you can't get warranty from other dealers.
I also noticed that if the product is defective, the other dealers don't care about you, while the official ones help with the matter.😊
Personally, Fnirsi are some of the best on the market in terms of quality versus price😉
@@ErCanEverything Yes, that is a good point. I always prefer to buy from the Official Stores but when I see what I want sold cheaper elsewhere, I can't stop myself, I buy it. I remember when I wanted to buy the FNIRSI spot welder. The official store advertised it and a launch date cause it was new and not yet available, yet other vendors were already selling the FNIRSI spot welder in their stores. Very strange.
I also agree with you, FNIRSI quality is really good.
Is the tip grounded?
This iron heats up instantly 🤩
There is an USB-C port, what is it for?
I was very enthusiastic and thought it could be used by connecting a power bank there, but that was just for firmware upgrade🤦😁
Ama Ali express den Türkiye ye gönderilemiyor neden?
Bence Türkiye'nin vergi yasalarından dolayı🤔
Ozaman Zafer Yıldız'a nasıl ulaşıyor bu tanıtım cihazları, onu merak ediyorum? 🤔
@@ErCanEverything katılıyorum
@@ErCanEverything ♥️
Great for small/tiny electronic connections. Not good for anyting bigger than that.
No tiene connection a TIERRA
I bought one and it’s more like 20w not 200w. It’s slower as cheap t12 and has shorter thermal inertia than T12. Maybe are tips bad but it’s same on c245 and c215 which is delivered with that station. I don’t recommend to buy it.
Nah i will pass and stick with ERSA or JCB .