Salamat at napanood ko Ang vedio na ito.sobrang liit Ng budget ko sa pag papa gawa Ng bahay ko..khit paano gusto ko meron heat isolation.alambre pwede na Pala mas makaka tipid.❤ salamat
He installed the insulation correctly with the aluminum coated side down. The only time you install the aluminum side up is when you have an air gap. He installed the metal roofing directly on top of the insulation foam and if the aluminum side was facing up it would just absorb the heat from the roof and would make the heat transfer even worse. Great job on your install and i am sure you are seeing great binifits with less heat as well as less noise when it rains.
@@tipsahoyt least 2 inches, tapos better if nakaseal yung hangin na yun, kasi with reflective insulation gaya neto, you're trying to make your house like a thermos, parang magiging vacuum yung "air gap."
Boss baliktad ang pag lagay mu ng roof isolation dapat sa taas ang foil kc Yan Yung mag resist ng init at para ang singaw na lalabas sa foam pa Punta sa loob ng bahay ay d na masyado mainit yan yung purpose nyan..
Then pag i cocorrect mo ung mga installers, ikaw pa ang pagtatawanan, sad reality of common practices that really are malpractices, they dont know the concept of heat reflection, shiny material shoulf be facing the heatsource(same as with thermoflask)
Haha. Ganito din. Nakagamit na ba kayo ng termos? Yung mga sira o basag nakakita na rin ba kayo? Kasi dito nyo makikita na yung refkective o mkintab na ala salamin ay nasa loob at syang nakadikit sa 'mainit ' na tubig kaya napapanatili nyang mainit. Sa bagong pamamaraang ginawa ng karamihan ay parang niredesign ang termos at inilagay ang mqkintab sa labas ng container. Maaliwalas lang kasi tignan kaya marami ang nagkakamali.
Sir gumamit na ako nyan after 2 to 3 years malalagas na sya.mas maganda siguro mga one half thickness ng styrofoam or sandwich panel ang gamitin para tumagal
@@John-tr7oy correct paps. White part will insulate against thermal conduction but useless against thermal radiation. Mylar side should be facing the roof to reflect the thermal radiation so the white part will do its job properly. Meron din dapat air gap between Yero and insulation. Tapos dapat may labasan Yung air gap na yan... Usually eave vent or rotary/roof vents. Para Makalabas Yung hot air. Kaya nadudurog mga insulation na Mali ang install after ilang years Lang... Mali installation... Lapat na lapat sa yero tapos wrong side pa. Lutong luto Yung white part... Nag di-disintegrate.
The shiny part should face up to reflect the radiant heat up, if the shiny part faces down.. you'll just reflect the radiant heat down towards the people... Makes the room hotter, same as an oven, you could see that the shiny walls(topside and sides) of the oven faces on the food you place inside, effectively cooking the food.... In your case you are not cooking the people inside the room... There should be an air space between the roof and the foil(foil part must face upwards) to effectively reduce the heat of the room
No, sir if the foil side touched the metal sheeting of the roof. It will conduct the heat through contact. By placing the foam side up, the closed cell foam forms a small air barrier between the foil and the metal roof. Thereby when the heat from the sun radiates from the metal roof the foil side under the foam will not allow the particles of heat to pass through and will reflect them back away from the house, not into the house... there are 3 modes of heat transfer, Radiation, conduction and convection... if installed properly this material will stop all 3.. I know this because I worked a NASA's Stennus Space Center in Mississippi.. and we used the material but with pure gold, not vapor deposited aluminum, way more efficient but about 10,000 times more expensive. Gold foil is used in the Space shuttle to protect the Astronauts and electronics from solar flares, as the is no magnetic feild , like on earth, to protect them. Gold foil is about 75.00 sqft usd where the vapor deposited aluminum is about .08 usd per sqft.
Yung mismong silver ng insulation dapat sa bubong mismo. Iaabsorb lang nya yung init sa loob. Hindi galing sa bubong. Dapat maabsorb nya yung sa bubong hindi sa loob. Dahil ganyan din ang mali ng ginawa sa bahay namin
The shiny part should face up to reflect the radiant heat up, if the shiny part faces down.. you'll just reflect the radiant heat down towards the people... Makes the room hotter, same as an oven, you could see that the shiny walls(topside and sides) of the oven faces on the food you place inside, effectively cooking the food.... In your case you are not cooking the people inside the room... There should be an air space between the roof and the foil(foil part must face upwards) to effectively reduce the heat of the room
Wrong installation, shiny side should be facing the roof, as it is the material that should be reflecting the heat, imagine cooking a fried chicken then putting it in a styro plate(plate will melt) Then imagine puting a aluminum foil on top of the styro plate, and again put the freshly cooked fried chicken, (the foil would protect the styro plate and would also reflect the heat back to the fried chicken) And sadly, installers would take a blind eye on science, and push through with their norm
The shiny part should face up to reflect the radiant heat up, if the shiny part faces down.. you'll just reflect the radiant heat down towards the people... Makes the room hotter, same as an oven, you could see that the shiny walls(topside and sides) of the oven faces on the food you place inside, effectively cooking the food.... In your case you are not cooking the people inside the room... There should be an air space between the roof and the foil(foil part must face upwards) to effectively reflect the radiant heat away and reduce the heat of the room
madalas ko nakikita na ung silver na part ang nasa loob ng bahay, sakin kasi ung ikinabit sa kwarto ko e ung puti, sabi ng karpentero ok lng daw un, pero pakiramdam ko ngaun ang init sa kwarto kesa sa ibang part ng bahay na silver na part ng insulator ang nakaharap sa loob ng bahay, d ba tlga nagmamatter un kung silver o white part ang nakaharap paloob ng bahay?
Baligtad nmn ung nakagawian dapat ung silver ang asa luob at dapat may pagitan sa yero para duon mag bounce ung init lalo sa gabe kapag baligtad yan ung init asa luob padin ng bahay nyo ung white side dapat ang asa luob or ung nakikita.
OK sana, aligtad lang pag lalagay mo, dapat yong. Yong makintab ang ibabaw para mag sangga sa init ng yero, pero Kong sa hood ng kotse ok pag naka taob, kc init ng makina ang harangan
ang gulo ng comment section... hindi ko alam kung alin ang susundin.. much better kung gagamit nlng siguro ng insulation na merong aluminum both sides...
Bakit yung mga comments sabi baliktad daw. Sa lahat kasi ng nakita kong bahay ganyang ang pag kaka gawa.pati nga sa palengke ng barangay namin ganyan din.o yun yung tinatawag na double sided?
Hahahaha... Boss may engineering Background ka ba....??? Ang source off heat ay galing sa sikat ng araw, para hindi tumagos yung init galing sa ibabaw, kailangan yung foil side ay Facing Upward para i-reflect nya pabalik yung init...
@@arnoldimpreso7402 research? Hahaaha maski nga sa thermos eh nakaharap ung shiny material sa loob(pra mareflect ang heat) Nakakalungkot lng na sa bansa natin, eh lagi nalang nakasanayan sinusunod imbes na tumingin sa “SCIENCE”
buti nakita ko to kasi yong sa bahay namin natuklap o nag tuklapan (kung sa loob ng attic mo titingnan nalaglag o lumaylay na mga inilagay ng insulator) na mga insulator pero ang napansin ko wala syang support kaya ngayon naghahanap ako ng kung sino pwede gumawa pero tingin ko hindi uubra yong tulad sa video na babakbakin ang roofing kasi shingles ang nakalagay at hindi steel roofing.
Mali naman paglagay mo ng insulation ang foil side suppose to be nasa taas then hindi sinasandwich or mismo sa yero ang insulation foam yan na kasi nakasanayan dito sa pinas pero ang totoo maling malig po ang paglagay nyo ng isulation dapat hindi yan dikit na dikit sa yero ang insulation foam
Salamat at napanood ko Ang vedio na ito.sobrang liit Ng budget ko sa pag papa gawa Ng bahay ko..khit paano gusto ko meron heat isolation.alambre pwede na Pala mas makaka tipid.❤ salamat
salamat poh.
He installed the insulation correctly with the aluminum coated side down. The only time you install the aluminum side up is when you have an air gap. He installed the metal roofing directly on top of the insulation foam and if the aluminum side was facing up it would just absorb the heat from the roof and would make the heat transfer even worse. Great job on your install and i am sure you are seeing great binifits with less heat as well as less noise when it rains.
Wrong...
@@rollietagala605 care to elaborate or is that the best response you got?
I mean you're correct buddy n theyre wrong...
Eto ang tama. Thank you po for explaining it well.
What if its double insulated aluminum on both sides?
wow ang galing mag install ng insulation. baliktad at nakadikit sa yero. idol. hahaha
Aside from baliktad ang insulation, kelangan din may gap between the roofing sheet and the silver side para may airflow and heat will be bounced back.
Ilang cm dapat ang gap sir?
Tama po Sir.. Maling-mali ang pagkakalagay...
Kya pla sobrang init Dito smin. Mali pla ang kabit Ng insulation.
@@tipsahoyt least 2 inches, tapos better if nakaseal yung hangin na yun, kasi with reflective insulation gaya neto, you're trying to make your house like a thermos, parang magiging vacuum yung "air gap."
baliktad yung pagkakalagay
Boss baliktad ang pag lagay mu ng roof isolation dapat sa taas ang foil kc Yan Yung mag resist ng init at para ang singaw na lalabas sa foam pa Punta sa loob ng bahay ay d na masyado mainit yan yung purpose nyan..
salamat poh..
tama ka dyan bai....
Meron option yung double
Then pag i cocorrect mo ung mga installers, ikaw pa ang pagtatawanan, sad reality of common practices that really are malpractices, they dont know the concept of heat reflection, shiny material shoulf be facing the heatsource(same as with thermoflask)
@@okinawajapan8895 mas ayos din sana boss kung may pagitan yung roof insulation at yero na atleast 25mm....
Haha. Ganito din. Nakagamit na ba kayo ng termos? Yung mga sira o basag nakakita na rin ba kayo? Kasi dito nyo makikita na yung refkective o mkintab na ala salamin ay nasa loob at syang nakadikit sa 'mainit ' na tubig kaya napapanatili nyang mainit. Sa bagong pamamaraang ginawa ng karamihan ay parang niredesign ang termos at inilagay ang mqkintab sa labas ng container. Maaliwalas lang kasi tignan kaya marami ang nagkakamali.
Thank you sa pagshare mo nito sir. and thank you din sa mga nagcomment at nagcorrect. Magagamit ko po ito sa next project ko. Godbless po.
Lol next project..
Ang galing ng diskarte niyo boss,..Salamat sa ideya,..
wrong side ang insulation dapat yun aluminum ang nasa ibabaw tapat sa araw.
Sir gumamit na ako nyan after 2 to 3 years malalagas na sya.mas maganda siguro mga one half thickness ng styrofoam or sandwich panel ang gamitin para tumagal
@@John-tr7oy correct paps. White part will insulate against thermal conduction but useless against thermal radiation. Mylar side should be facing the roof to reflect the thermal radiation so the white part will do its job properly. Meron din dapat air gap between Yero and insulation. Tapos dapat may labasan Yung air gap na yan... Usually eave vent or rotary/roof vents. Para Makalabas Yung hot air.
Kaya nadudurog mga insulation na Mali ang install after ilang years Lang... Mali installation... Lapat na lapat sa yero tapos wrong side pa. Lutong luto Yung white part... Nag di-disintegrate.
This is wonder. Thanks for this brilliant idea
Galing naman
Magpapalit ako ng luma at sirang bubong Tama ba na hindi na tanggalin yung bubong at patungan ng insulation foam at bagong yero sa taas?
Baligtad boss dapat yung sa taas ang silver.. para hindi papasok ang init.. ibabato ulit ng replicator ang init sa taas
pero boss. may forman akong kilala. sabi nya elimdaw ang silver. pero may ponto ka boss. para hnd tatagos ang init
Merun double sided ..Yun ang da best
Doble trabaho ,...dapat sabay n yan sa pag roofing..
Palagay ko luma n nkabit Yan ..kailan lng yn insulation.paràng baligtad lng Ang kabit..😋🤔.d foil facing the roof ata dapat
ngayon lng naisip ng may ari or ngyon lng nagkapera
The shiny part should face up to reflect the radiant heat up, if the shiny part faces down.. you'll just reflect the radiant heat down towards the people... Makes the room hotter, same as an oven, you could see that the shiny walls(topside and sides) of the oven faces on the food you place inside, effectively cooking the food.... In your case you are not cooking the people inside the room...
There should be an air space between the roof and the foil(foil part must face upwards) to effectively reduce the heat of the room
True, the non shinny part should be facing down that's the only down side. Lahat thumbs UP naman lalo ang pag-lalagay ng insulation na may yero na!!
No, sir if the foil side touched the metal sheeting of the roof. It will conduct the heat through contact. By placing the foam side up, the closed cell foam forms a small air barrier between the foil and the metal roof. Thereby when the heat from the sun radiates from the metal roof the foil side under the foam will not allow the particles of heat to pass through and will reflect them back away from the house, not into the house... there are 3 modes of heat transfer, Radiation, conduction and convection... if installed properly this material will stop all 3.. I know this because I worked a NASA's Stennus Space Center in Mississippi.. and we used the material but with pure gold, not vapor deposited aluminum, way more efficient but about 10,000 times more expensive. Gold foil is used in the Space shuttle to protect the Astronauts and electronics from solar flares, as the is no magnetic feild , like on earth, to protect them. Gold foil is about 75.00 sqft usd where the vapor deposited aluminum is about .08 usd per sqft.
would a double sided foil be better in this case? I'm planning on getting a 10mm double sided foil for mine
He installed it correctly, the only time you install the aluminum side facing under the roof is when there is an air gap.
dito rin ako naguguluhan kung anung side ang up or down.
Dapat iyung foil side is on top and in contact with the the roofsheet.
Yung mismong silver ng insulation dapat sa bubong mismo. Iaabsorb lang nya yung init sa loob. Hindi galing sa bubong. Dapat maabsorb nya yung sa bubong hindi sa loob. Dahil ganyan din ang mali ng ginawa sa bahay namin
At tsaka dapat may space na 1 to 2 inch pag flat roof gamit, pag naman corrugated roof ok na lapat sya kasi may space naman.
The shiny part should face up to reflect the radiant heat up, if the shiny part faces down.. you'll just reflect the radiant heat down towards the people... Makes the room hotter, same as an oven, you could see that the shiny walls(topside and sides) of the oven faces on the food you place inside, effectively cooking the food.... In your case you are not cooking the people inside the room...
There should be an air space between the roof and the foil(foil part must face upwards) to effectively reduce the heat of the room
@@Jon-Sen sir okay lang ba ilapat sa bubong ang insulation foam if corrugated roof gamit no need na Ang space between sa roof at insulation foam?
@@Jon-Sen paano po magkakaroon ng space? Di nmn po pwede mainstall ung bubong kung nakaangat
Hello po, paano po kng may yero na nakakabit pwede po bang ilatag sa ibabaw ng kisame?
pwd poh kaso mahihirapan ka sapaglatag ng foam
Wrong installation, shiny side should be facing the roof, as it is the material that should be reflecting the heat, imagine cooking a fried chicken then putting it in a styro plate(plate will melt)
Then imagine puting a aluminum foil on top of the styro plate, and again put the freshly cooked fried chicken, (the foil would protect the styro plate and would also reflect the heat back to the fried chicken)
And sadly, installers would take a blind eye on science, and push through with their norm
noice analogy bro
Is it better to use double sided foil? Thanks
Yup. Aside from the shiny side facing the roof, there should also be an air gap between roof and insulation foam.
The shiny part should face up to reflect the radiant heat up, if the shiny part faces down.. you'll just reflect the radiant heat down towards the people... Makes the room hotter, same as an oven, you could see that the shiny walls(topside and sides) of the oven faces on the food you place inside, effectively cooking the food.... In your case you are not cooking the people inside the room...
There should be an air space between the roof and the foil(foil part must face upwards) to effectively reflect the radiant heat away and reduce the heat of the room
back to back po ata yung shiny side ng gamit nila.
Correction, Ndi 45 meters ang isang roll, kundi 45 pesos per meter😂
Dto po samin 60 php per meter..1/2 thickness..back to back Ang foil
madalas ko nakikita na ung silver na part ang nasa loob ng bahay, sakin kasi ung ikinabit sa kwarto ko e ung puti, sabi ng karpentero ok lng daw un, pero pakiramdam ko ngaun ang init sa kwarto kesa sa ibang part ng bahay na silver na part ng insulator ang nakaharap sa loob ng bahay, d ba tlga nagmamatter un kung silver o white part ang nakaharap paloob ng bahay?
Baligtad nmn ung nakagawian dapat ung silver ang asa luob at dapat may pagitan sa yero para duon mag bounce ung init lalo sa gabe kapag baligtad yan ung init asa luob padin ng bahay nyo ung white side dapat ang asa luob or ung nakikita.
Pwede b double sided n foam insulation ang gamitin?
yes poh masmagamda
wow anong size s insulation foam bossing, mag kank ang presyo?
Idol ask kolng kung arawan kajan or pakyawan?
Boss matibay pb ang kapit ng tex screw sa purlins pagbinalik uli balak q sana magpalagay din ng insolation eh..tnx
mas ok kya qng sa ilalim ng purlins ang insulation? 3" n ang gap mula sa yero..
OK sana, aligtad lang pag lalagay mo, dapat yong. Yong makintab ang ibabaw para mag sangga sa init ng yero, pero Kong sa hood ng kotse ok pag naka taob, kc init ng makina ang harangan
Yari ka sa may ari ng bahay pag nakita yang video mo at nabasa mga coment dito..hahaha..back job is real! 🤣🤣🤣
Ahahaha
Galing
Wow galing Bro, Salamat sa sharing ng inyong Idea, ingat kayo ng Tropa mo, God bless you all, pashout out sa next video Mr Idea's Tv, Salamat
cge boss. maraming salamat
@@initing thanks na marami
Sa paggamit po ba ng insulation foam ay kakalawangin po ba ang bubong?
maganda maayos ang pagkagawa
Pano po pag may kisame na? Pwede bang wag na tanggalin kisame? If yes, anong side po dapat ang facing inside, yung may foil?
heto gamitin mo kapag may kisame
ruclips.net/video/JeBcWK89ZiA/видео.html
ang gulo ng comment section... hindi ko alam kung alin ang susundin.. much better kung gagamit nlng siguro ng insulation na merong aluminum both sides...
Bakit yung mga comments sabi baliktad daw. Sa lahat kasi ng nakita kong bahay ganyang ang pag kaka gawa.pati nga sa palengke ng barangay namin ganyan din.o yun yung tinatawag na double sided?
nice idea
di uubra yan, nagtanggal ka pa ng bubong. dapat sa ilalim ng c-purlains nagkabit nyan at para may air space din! mainit pa din yan
Watching here kaibigan
Mali po paglagay ng p e foam ..bai..
dapat po yung foil yung nakadikit sa yero lalo't single lang po yan..payo lang po..
Oo nga dahil yun ang sumasalo sa init
Kung mag butang ug alkuba, pwede ba wala na foam?
pwd ra boss.
Sir saan ba ang lugar mo. pede bang mag pagawa ako sayo ng bahay ko
cebu sir
Di ba dapat yung reflective side ang nasa taas para magbounce back yung init mula sa yero at hindi lahat papasok sa loob ng bahay?
Baliktad ang paglalagay mo ng insulator. Dapat Facing upward yung Foil side, hindi Downward...
salamat boss..
Hahahaha... Boss may engineering Background ka ba....??? Ang source off heat ay galing sa sikat ng araw, para hindi tumagos yung init galing sa ibabaw, kailangan yung foil side ay Facing Upward para i-reflect nya pabalik yung init...
@@alexapostol123 korek kjn sir
@@alexapostol123 tama bai....
@@arnoldimpreso7402 research? Hahaaha maski nga sa thermos eh nakaharap ung shiny material sa loob(pra mareflect ang heat)
Nakakalungkot lng na sa bansa natin, eh lagi nalang nakasanayan sinusunod imbes na tumingin sa “SCIENCE”
Idol saan ka ba pwede makontac?
Magkano po kaya ang pagawa ng ganyan? Salamat po.
Who is telling the truth? Upside foil or down ward? Please men tel the truth, im installing the isulator next week
Bakit karamihan ng video sa youtube about insulation foam baliktad? Dapat yung reflective side nakaharap sa ibabaw para ireflect nya yung heat.
i noticed that too.
Mas maganda Kapalan ang insulation at ipitin ng screen mas tatagal
Dapat nakalatag sa plywood yan hindi ung lagyan u ng tie wire mali yan e karamihan nakita q sa abroad e plywood muna bago ang insulation foam
pwd rin yan sir. tipid kc ehehe. salamat sa idea sir.
Kung ako niyan screen ang ilalagay ko yong pang halaman na wire
Yung shiny side ang nakatapat sa araw
buti nakita ko to kasi yong sa bahay namin natuklap o nag tuklapan (kung sa loob ng attic mo titingnan nalaglag o lumaylay na mga inilagay ng insulator) na mga insulator pero ang napansin ko wala syang support kaya ngayon naghahanap ako ng kung sino pwede gumawa pero tingin ko hindi uubra yong tulad sa video na babakbakin ang roofing kasi shingles ang nakalagay at hindi steel roofing.
Hindi ba baliktad yan sir?
Mali daw yang alambre boss dapat daw yong kulungan ng manok na plastic
the aluminum foil should goes towards the sun, mali yung paglatag mo bro ng insulation. kawawa naman si owner.
Ganyan din ang alam ko, nakaharap sa yero yung foil.
dba dapat ung foil sa taas?!
Ok lang din kung lalagyan pa ng kisame
iinit parin Yan kasi Ang nipis ng insulation ..dapat Ang binili Yung double sided .
Mahal ang double sided insulation
boss magkanu po ang insulation foam
Mga boss pwede po ba maglagay ng insulation kahit hndi na tanggalin yung bubong ? salamat sa sagot mga boss
Pwede naman
@@conradarada thanks
Hala! Baliktad!! Haha!
May napanood din ako na, tinataliaan yong dulo ng insulation
Kuya Baliktad naman po yan,
Blog kapa ng male pare
Sus baliktad naman installation mo hindi kb nagbabasa kung ano at pano mag install? Ano silbe nyan design??
Ipikit and mga mata si Manny Pacquiao ang inyong makikita.
ayaw kona mag presidente boss, mag vloger nlng ako 🤣🤣🤣
Mali naman paglagay mo ng insulation ang foil side suppose to be nasa taas then hindi sinasandwich or mismo sa yero ang insulation foam yan na kasi nakasanayan dito sa pinas pero ang totoo maling malig po ang paglagay nyo ng isulation dapat hindi yan dikit na dikit sa yero ang insulation foam
Baliktad boss
Bilib na sana ako baliktad yung pagkabit
Manny pacquaio
matrabaho yan boss
Gosh sabi comments dito, mali ang installation , baliktad!
pag single silver, dapat sa ilalim ng yero, para hindi malaglag yong foam pang matagalan
Baliktad
pwd pala yan boss?
galing