How to Fix a Push Button Thermos Cap

For fixing a vacuum-sealed beverage bottle cap, I couldn't find anything online that had a solution to the broken/malfunctioning cap that has an open/close button on it. Hope this solution works for you, thanks for viewing!

[@pattybb2823]

Back again 3 years later, totally forgot to do it. Thanks again

[@nachosarmiento7289]

Man, thanks!! I watched like 5 videos, and yours was the only one that showed the key trick of putting the top upside down. Great job!

[@_ruwita_]

Thank you so much. I broke ours but didn’t tell mom I did. So I wanna fix it before they even know it. 😂😂😂 this video just saved me 👌🙏😂🤗

[@siddhiqkaa5156]

Oh my god.... Me too.. Just right now and I am freaking out

[@cutepreencez2086]

😂😂😂

[@Bulldog_skin]

Dude! Thank you so much! Ours wouldn’t pour correctly when you clicked it open.. just a trickle. We are on vacation and we use ours for hot water for baby formula. We are just about to leave the hotel room for the long drive home and I decide to try and fix it. It is obvious the gasket is out of place and so I mess with it and now it pours out if it is open or closed. I search and find your video and see how your gasket is sat on the top and realize ours is on completely wrong. I ask my wife if she ever removed it and she says yes. I turn it around and place it how yours is and it works as good as new. Thank you so much!

[@moniqueb5070]

I just bought a 2nd hand push button thermos, and needed to know if the entire assembly could be cleaned. Now I know it can. Thank you!

[@hlngrieu]

I don't have the exact same model but your video allowed me to get the logic and fix the cap. Many thanks 😁 !!!

[@dogbass]

Cheers man,fixed mine! turned out there was another spring floating about in the gubbins too! thanks.

[@roseweb7104]

Thank you! One of my grandsons (they won't admit who) pulled off that piece that holds it out together. i'm sorting it with help of your video. Really appreciate this.

[@pawewalczewski2540]

I want to clean mine but was afraid I would break it. Now I'm not. Thanks for taking the time to post it.

[@AmbreenK]

Yay!!! I'm soo happy this video exists. I fixed my thermos. It only took me watching this video 4 times. 👏👏👏

[@HHSgymnast]

Bennett thats so smart! I have a tea thermos that may need that at some point - thanks for the video tutorial!

[@teji_teji_]

thanks so much for this. I didn't break mine but it kept leaking after i cleaned it. Your vid made me realize i placed the rubber part wrong.

[@tiredofbadusername09]

OMG! Thank you! It was driving me nuts😂😂!! Then I found your video 🙏🏻🙏🏻🙏🏻

[@toxpaws]

I don't know how it happened that it boke. I told my cleaner to "just rinse it out" cause I usually clean it. And I don't know how, but after I watched your video, 2:57 pieces was the wrong way. No idea how it got that way from "rinsing out" but thank you for guiding me through how to fix this

[@GHOSTVAL]

It would never crossed my mind that posting that kind of video could be helpful. Until I needed it :)

[@lewisjohnroberts6867]

This video just saved me throwing a $60 thermos in the garbage. Thanks

[@negiasunaify]

Thanks! I didn't know how to fix it and now it's working again!

[@shodawuraola1260]

This just saved my favorite flask from going into a waste... Thank you very much for sharing 😁

[@sendsangita]

Brilliant help. Salvaged my fav. 500ml camping flask. Bless you.

[@OlimpiaOlimpia]

Thank you so much for this video! I broke the lid of my thermos flask by putting it on the dishwasher machine (which of course you're not supposed, but I thought nothing would happen... wrong. Never again) The lid came apart and I could not for the life of me figure out how to put it back together, and it was driving me insane 😩😩 so thank you so much for the tutorial. It's my favorite thermos and I was able to put it back together and not have to throw it away or buy another one. Thank you so much ♥️

[@celcerut]

Thanks for showing this! I managed to save the thermos flask.

[@paxxor89]

Same - lifesaver. Different open/close-mechanism on mine but basically same parts. Thanks!

[@alizain6887]

Thank you so much...you are a life saver....i wanted to go to school tomorrow and my bottle pressure point was broken so I wanted to fix it and it's fixed thanks

[@OmoleyeOdunayo-xu3bm]

Thanks so much for helping me fix my pushbutton flask

[@yolandaquintero3571]

Hurrah! I fixed my favorite tea thermos. Thank You!

[@DolevHarbi]

Thank you for your guide to fix, assemble and disassemble a thermos cap

[@KayGarnellenartist]

I thought my kid had destroyed my cap but thanks to you it's fixed now!! Thanks a lot

[@MartinTrebbin]

Thank you very much for this instructive video! It worked for me. In my case, the outer circle from the outer top part was deformed because I used it in reverse as lid waiting for my tea. This seems to have deformed the circle to an ellipsis. As a result, the inner top part didn't go high enough anymore to trigger the closing mechanism. After disassembly, I used a hairdryer to heat the whole part up and then press the inner circle part back in to shape the outer ring back into place. It deformed it back and did the trick with the mechanism. Assembled everything again and now everything works again. Thank you very much for this video! :)

[@subhamsekharpradhan297]

Riskless Working procedure. Thanks man

[@aarohiapeksha]

wonderful. Thank you for the video. We were trying hard but could not refix it. But with the help of your video, it was done.

[@ashleyengland9874]

You saved my $30 teavana tumbler! How can I ever thank you??!?!!

[@vipinkumar5955]

thank youu so much bro today u saved me from my paps's belt😂

[@sanyashabbag7628]

YOU JUST SAVED MY LIFE..... well my college life 😋😂

[@pattybb2823]

just did the same thing trying to clean it and broke it, it's all fixed now so thanks.

[@lucyapanda6499]

I tried cleaning mine before the first use and wasn't sure how to put it back as it was 😂 Thank you

[@madhanrajm8285]

Thanks to you. My mom thinks I'm a genius now

[@mariejuana2993]

Thanks so much dude. I just bought my fiancé one of these so ge doesn't dehydrate at work and I wanted to rinse and fill it and somehow made the push part loose (?) And this vid solved it 👌 One of those problems people dont really have but thanks a mil for making this vid 👍

[@remnant1018]

How did you get the spinning-top-looking part back into the unit?

[@mattress5340]

Thanks man - was able to fix my wife's expensive flask!

[@chisan0985]

You just saved my tumbler, thanks bro

[@Thabo33]

Thanks Man.. this helped me a lot

[@umerfaroq86]

Man sir u r amazing. I fixed my themos cap looking at the video. Thanks thanks thanks alot sir. Amazing

[@onoriodeovwere1362]

GOD Bless you man, for sharing.

[@alabaagbakosi7095]

Thank you very much. It was really helpful

[@AnkitaPtnk]

Really helpful..thanks a lot Bennett

[@niknkson]

Thanks mate, that really saved my two flasks ❤️❤️

[@EdieBabeMonster]

I’m hoping your demo saves me - mine is slightly different but it is the little white doohickey that goes over the spring that has vexed me... here is hoping

[@debanjonshome5083]

That really works!THANKS!!

[@huda_ebrahem]

Thank you so much for trying this method and it was useful; but I discovered an easier way to open it than above with a Nail file head.

[@vidhiseechunder1237]

Thank you so much
I was super sad when I broke me
I just bought it 😰

[@DarkSociety2]

Thanks u soooooo much u saved my phone from being soled

[@hanswelsing4579]

Thank you so much ...you save my thermos !!!!!!!!!!!!!!!!!!!

[@tapashbardhan5518]

Thank you so much! This video just saved me. Love you!

[@WonderMallowUK]

Omg you're awesome! Thanks so much, it worked! 😊

[@wogutierrez1914]

Very nice explanation. Thank you so much I fixed mine.

[@zoimoie]

thanks bro..I think my tea tastes better now :)

[@marygroves5621]

Where can you buy parts? The small spring cap broke.

[@Gw_wee]

‏‪0:58‬‏ Do you have another solution to open this piece? I could not open it. It is very strong

[@timchatterton8408]

Hi - at 4:36 the video suddenly jumps so that you have the silicon O ring suddenly appear on the top (when previously it was just lying by the side) this is the bit I am trying to work out how to fit back on it but not sure how it goes (the top clicky mchanism is all fine and in one piece stll but trying to screw the bottom section back on.
Cheers

[@stevstephan]

bought mine on ebay and came apart thanks to this vid its back together again thanks :)

[@tamaskincses9560]

Helped me to fix mine. Thanks!

[@channavirboss437]

Thank you so much for the information

[@sonamparams4719]

Thanks, you are genius

[@ellieclarke6287]

I wish you had shown how to get the rubber ring back on- that's the part I really can't work out!

[@ayeshafatima2030]

Thanks it was very useful.

[@obber]

I almost broke mine so... Thanks for the vid man.

[@siddhiqkaa5156]

I knew there would be one solution online... Now let me fix this before mom comes home....

[@dawnbailey824]

Does your liquid come out of the center or from the outside?

[@chalkyeye5956]

Lol sooooo I totally did the same and the lid still kinda has a funky smell what can I do to clean it without having to take it apart??

[@ravemelvin]

Very helpful dude. Thanks a lot.

[@HansakaWeerakoon]

Thanks for the guidance

[@sanobariftikhar5175]

Our that white plastic piece is broken.. where can we get?

[@raniae5029]

Nice vid dude, but to be quite honest with you, I only found out about your channel bcs you have the exact same name as my favourite character from a wattpad book.... cheers!

[@stephanieluxton8020]

Thanks for the help. I fixed my thermos!

[@libe2001]

kudos to you for the help.Thanks.

[@laurab1804]

Thank you. Helped me big time 😊

[@Tayyaba_The_Artist]

You made my life

[@JayceArgo]

Super helpful. Thanks 💪🏻

[@thewatcherinthecloud]

Didn't end up disassembling it, but at least I know there's a "right alignment" to get it clicking properly.

[@innokyo]

Thanks dude... its very helping...

[@manishsah8709]

That was helpful 👍👍

[@massaya1]

You save my life thank you so much

[@fadheelalawal1940]

Thank you always ❤

[@srinathtube4307]

Thank you sir...for sharing

[@darkcomic1017]

How about if the problem is the open push button on the top?

[@sagarkashyap5555]

You are the great thanks to you

[@niketverma9350]

Thanx brother

[@FindingRhenie]

My bottle cap doesn't open is the problem. The only way it will open is if i hold the button down. I've taken it apart but am still unable to fix it. any ideas?

[@meghanmcdrmott9882]

The stick part broke off from the little nob . How do I fix ?

[@parisaw2Ooo]

Thank you so muchhh i just fix the lid of mine🎉

[@Evangelistiq]

Thanks for the video but can anyone tell me where to buy the spring? My Spring is broken!

[@bgmeads]

I would look at lows or Home Depot because I saw a lot of different springs there

[@queenbee3634]

Thanks just fixed mine💖

[@kinolgamage3270]

Your video was on point but unfortunately the small white piece 04:23 was broken :(

[@mofyin]

Thank you very much ❤

[@vipul5869]

Thank u so much .its a helful video

[@brunobitencourt6846]

Thank you so much 🎉🎉

[@ormandyolartemarin2899]

Algunas veces la pieza plástica negra se deforma por el uso entonces dos dientes ya no hacen juego, lo que hice fue ponerla a hervir unos pocos minutos en agua caliente y tomo de nuevo su forma original...

[@ramiz1116]

Just saved my life

[@vaseelahammed1028]

thank you Bennett thank you very much

[@ashutoshjadhav7224]

i hv lost my lid, is there any way to buy lid only instead of whole flask,