@@falgunishahfujiart but mam instead of mdf shit n acrylic colour what can I use for this mandala art....For the base do u use matte acrylic black colour or normal black colour
Hi.. it's a nice video. Pls help me on below.. 1.Can we use modge podge instead of resin to get same results? 2.If gas gun not available? Any alternatives to remove the bubbles? 3. The resin finish can be applied for all bases?
Thanks a lot. 🙏 1.You can apply mod podge but it never gives glass effect like resin. 2. If you don't hv gas gun, you can use flame lighter or hot gun. 3. Yes resin can be done on many surfaces.. Like canvas, acrylic, ceramic, mdf, glass etc.
@@falgunishahfujiart I saw this also ma'am I wanted to know how u kept the number MDF on that mandala MDF in that directly it is shown that how u dotting on it
Very informative and inspiring video. Thank you for posting this. Were you able to cover two clock faces with the amount of resin mix u made in the beginning?
How much quantity to be used .I saw u use lots of resin. It should be thickened or wat? Or we hv to apply thin layer on it as on cups u used thin layer.....can u pls explain it
hi jyoti.. we have to do thin later on cup. but on clock we have to apply enough amount of resin to cover all the dots and top dots. may be sometime 2 mm layer. it becomes strong like glass... and gives amazing finish.
Thanks for the amazing experience of resin. I was thinking you would tape hole in center before you pour resin. Gloves disposal glass stick all must be thrown away but how did you clean the brush?
Thanks for sharing very well explained
Glad it was helpful!
Thank u so much mam for showing this .....Ur art n u just an amazing ...Love u mam..
thanks dear ❤️
@@falgunishahfujiart but mam instead of mdf shit n acrylic colour what can I use for this mandala art....For the base do u use matte acrylic black colour or normal black colour
you can do on any surface like wooden plates, crockery, acrylic sheet, paper anywhere. i use fevycryl acrylic black or black chalk paint
Wonderful details. 🙏❤️
Glad you think so!
Such a creative artist u are😍
Thanks a lot 😊
Excellent work 👌👌
Thanks a lot 😊
Thanks for sharing. Beautiful work falguni. Keep going.
Very beautiful and creative artwork.... Resin part was actually very interesting and informative ... 👌👌
Thanks dear
Well explained... thank you so much for sharing.. love your artwork 👍👍
Thank you for your kind words
Be work and very well explained. Thank you 😊
Most welcome 😊
very informative
Glad you liked it :)
Hello..aapka koi learning session..I want to learn this clock
Beautifully explained👏👏👏
Thanks
Ma'am if u cud pls share where did u got that numerical panel for d clock...thx
you can msg me on facebook. it is custom made cutout.
Awesome creativity ❤️❤️❤️ Where from you bought the clock base?? Please suggest...
u can contact me for base.
Very informative, thanks for sharing 🙂 can v use hair dryer instead of gun?
No we can't. As it is not useful in bursting bubbles. Use heat gun, blow torch or gas lighter.
Hi.. it's a nice video. Pls help me on below..
1.Can we use modge podge instead of resin to get same results?
2.If gas gun not available? Any alternatives to remove the bubbles?
3. The resin finish can be applied for all bases?
Thanks a lot. 🙏
1.You can apply mod podge but it never gives glass effect like resin.
2. If you don't hv gas gun, you can use flame lighter or hot gun.
3. Yes resin can be done on many surfaces.. Like canvas, acrylic, ceramic, mdf, glass etc.
Can v use epoke resin on acrylic artistic colour
yes. we can.
@@falgunishahfujiart thanks
Falguni very informative. How to apply in cups? Upload one video pls. And I didn’t get the use of gas gun.
Gun is used to burst bubbles if any. Bubbles spoiled yr project after resin set. Whole mug video will be posted today.
Is there is any video of the whole process of making mandala and pasting numbers... I want to know u have made it?
pl check its previous video please..
ruclips.net/video/AWNFwjMfYss/видео.html
@@falgunishahfujiart I saw this also ma'am I wanted to know how u kept the number MDF on that mandala MDF in that directly it is shown that how u dotting on it
How did you make cutout for numbers?
through a laser vendor
Very informative and inspiring video. Thank you for posting this. Were you able to cover two clock faces with the amount of resin mix u made in the beginning?
Yes I did
How much quantity to be used .I saw u use lots of resin. It should be thickened or wat? Or we hv to apply thin layer on it as on cups u used thin layer.....can u pls explain it
hi jyoti.. we have to do thin later on cup. but on clock we have to apply enough amount of resin to cover all the dots and top dots. may be sometime 2 mm layer. it becomes strong like glass... and gives amazing finish.
@@falgunishahfujiart thank u so much dear
Thanks for the amazing experience of resin.
I was thinking you would tape hole in center before you pour resin.
Gloves disposal glass stick all must be thrown away but how did you clean the brush?
Yes i have taped that hole from bottom side.. Forgot to show in video. Thanks
I use my waste brush for that n throw them away after resin process. Thanks
Hi. How to buy your products dear?
contact me on 8320442768
@@falgunishahfujiart thanks dear
Ma'am please tell me how it is looking in 3d
Due to the colour combination used and the Resin done
Do u gv any other resin then epoke?
just bought other brand. will share result soon.
Thank u
It's really amazing... Thanks for sharing tips Also. Where you got the hot gun?
You will get it from craft store or online. Or from the vendor who keeps bakery supply tools.
@@falgunishahfujiart thank you so much ❤️