Headlight Bulb Removal and Refitting - Nissan Micra K12
HTML-код
- Опубликовано: 9 фев 2025
- How to remove and replace the headlight bulbs on a 2003 to 2010 Nissan Micra K12. Thanks for watching, please comment, like and subscribe !.
~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.
🚗 H4 Halogen Bulbs - amzn.to/3rngG7P
🚗 Socket Set - amzn.to/3BmbuHr
Disclaimer: Screwsnutsandbolts is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2022
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.
Dziękujemy.
Thank you very much for your support !. I really appreciate it 👍👍
Thank you for the high quality close up photos! I had a problem with beam not being formed correctly and thanks to you I realized my bulb dropped low when I was putting on the bracket! Corrected it and now it's as it should be 🎉
You are welcome !
Thanks for the vid.
Just changed an H4 headlight bulb on third attempt. As usual once you have done one, the next time will be easy. The main problem is removing the black socket from the rear of the light bulb before you remove the rubber gasket. The manual implies you should squeeze and pull backwards. I was assuming there were some tabs which need depressing to get it to release. There are not. It really is just a case of pulling it back firmly and the bulbs tabs just slot in/out. I found mine were really solid - three people all tried in vain. I had a closer look at the socket on line and once I realised there were no tabs to depress and no wiring to damage on the sides I used a plumbers wrench to grab the socket rear - couple of wiggles and back-pull and off it popped. Easy peasey - Why has no one mentioned this before? Please tell everyone - shout it from the mountains - no copyright.
Yes I am enjoying my cup of tea and biscuit victory moment.
Thanks for this i have the damn same exact issue mine is fully on and not going to be a easy job to take off especially with the 2 inches of space nissan gave us to fix this. I fully aprreciate this as nobody has mentioned if there was a clip to release the socket and i couldn't find any info on it. Much appreciated.
Thank you - I followed your instructions and replaced headlight bulb. It took a lot of wriggling to remove the connector but got there in the end.
Thanks for watching !
I changed bulb myself by watching this video..Save my time and Money..Thanks and ❤❤
You're very welcome !
¡Gracias!
Thank you very much for your support ! 👍👍
Excellent video. Thank you, changed mine before hubby came back from walking dog. 😊
Good job :)
I pulled that hard on the plug that it deformed the interior of the lamp. Now I have to change both headlights completely because of my rough handling. I advise to loosen the rubber coverage at first then release the spring clip and then disconnect the plug from the bulb. That prevents any deformation/damage from the headlights.
good tutorial! this is my first car and i’ve never touched under a car bonnet before but i was able to replace the bulb perfectly 👍
Thanks for watching !
Excellent video, I just changed my wife’s ones, i installed led ones and they are brilliant 😊❤
Thank you !
Foarte util! Multumesc din suflet!!!!
You are welcome !. Thanks for watching !
Большое спасибо, мы до того как посмотрели ваше видео чуть пальцы все не сломали, маялись 2 часа и это не преувеличение
You're welcome !
Well done
Thanks !
Great guide! Thanks
You're welcome, thanks for watching !
Thanks a lot man🙏🏽👏🏽
You're welcome !
Thank you very helpful ☺️
You’re welcome 😊
perfect! thanks😮
You're welcome!
Best explain thank you
You're welcome
Well done. Thank you.
Thanks for watching!
Thank you very much!
You're welcome!
good..job, I m watching ur vedios regularly.. I have Yaris Toyota 2002,,for last few weeks .it's clock setting is out..kindly make a vedio on it.
Btw I just wanted to ask whether K12 has just one bulb that's used as high beam and low beam??
Yes it's a single H4 bulb.
Is it possible to get Honda civic H7 Bulb Removal and Refitting?
I don't have access to a Civic, sorry
Sorry we necessarily need to disconnect the battery negative side??
i had three different cars and never disconnected the battery while changing bulb
@@KathyelynPraise be to the Lord Jesus Christ that you are still alive to tell your story!
Can also take out the 2 bolts holding the unit .Whole unit lifts up for better access
Unfortunately there's a third bolt holding the front outer edge of the unit, behind the bumper. You can see it here: ruclips.net/video/0nTN6sz8R1U/видео.html
@@screwsnutsandbolts
Yes there is ....But removing the 2 bolts means u can lift it up enough to get more access...
Honest guv....lol...
Just be careful not to put too much stress on the remaining bolt bracket or it could snap
Yes very true .
I'm loving all your videos
Thanks !
Thhankyou forthe ideal demonstration, with fotos, in other clips the demonstrater works with hands in the motor, you don‘t really see the actual process. the fotos dhow the site and the process ideally
You're welcome, thanks for watching !
Greetings very well explained I would like you to also explain how to fix toyota yaris 2007 I have one
I don't have acces to one, sorry
The dip headlight and the first set (morning or meeting light ) is the same h4?
The H4 is the dip headlight and the high beam
Hello! Anyone know K12 headlight wiring Diagram Common side is Positive or Negative ?
you don't shoot Peugeot 206 videos anymore? waiting for new 206 videos.
I don't have the Peugeot 206 any more, sorry
Really useful video thank you, managed to change the lights!
One question, I've also changed the side light bulbs but they don't seem to be working, also checked the fuses and they seem fine. What do you think the problem could be?
Were they regular or LED sidelight bulbs ?
@@screwsnutsandbolts LED
I think led bulbs only work in one direction. Did you try taking out the bulbs, turning them 180 degrees and refitting them ?
I'll try this tomorrow, thank you for the tip👍🏻
E lo stesso procedimento dall'altro faro???
Yes it's the same
@@screwsnutsandbolts si deve scollegare il cavo batteria????
You can leave it connected but make sure the lights are switched off :)
❤❤❤😊
Thanks !
what is motor wiring?
The motor adjusts the height of the headlight beam
@@screwsnutsandbolts thanks
ABO 100 % THX
Thanks for watching
My plug just refuses to come out. I nearly broke the retaining spring and it's still not out.
They have a habit of getting firmly stuck on the pins. You'll just have to keep wiggling the plug and it should come off eventually.
Is too hard :(
Thank you so much!!!
You're welcome, thanks for watching !