Woah man you edit n make videos as if your account has a few million subs ❤ keep up the good work i seen plenty of builds from u id like too redo into my own colors n etc, i love how you show n explain what you can
Where can I find the template/ live wallpaper for the LCD screen. I have this build on my hyte y60 but can’t seem to find a site that offers the templates.
I’m having trouble getting the RGB wiring for the lian li strimers powered, I have pretty much the exact same set up as this, same motherboard and everything, I know I’m missing something with them, but I can’t figure it out
@@MikeFiero88GTiam using the lian li hub plug in both strimer cables into the hub then plug the hub on a sata power connector and on one International usb Port on your motherboard (make shure to adjust the switch on the lian li hub to your preference)
I was gonna say, if you are using the NZXT splitters, please avoid using them as they would not work with your Lian Li Strimer and UNI Fans. Thank you @rocketgamer3878 for answering that, remember to flip the switch to correct direction of your strimer otherwise it would not work
@@archetype_origins Most of the small coolers aren't that good as the bigger ones and sometimes you can't build it into all cases because of bad airflow and high temperatures or verry noisy radiators. An AIO or custom Made watercooling setup beats this all, in most cases it's quiet, small formfactor, looks brilliant, better temperatures etc.
Did you connect the micro USB cable to the USB 9pin on the motherboard? Or did you connect it to the psu with an adapter? Can you link the cable model? @@riceandnoodlelover
You should use a DP cable for your PC to monitor as it supports higher resolutions, higher refresh rates, and more bandwidth than HDMI. If you're really trying to maximize the your PC DP is the better option
i have a question. I have an i9 13900k , and my radiator will go on top of the case. should it be exhaust or intake? also does it matter very much? thank you.
hi, really love your build... still wondering where did you put all the Lian li 6 fans? 3 tops 1 rear 2 side? what about the AIO fans? thank you if you are answering my curiousity
@@archetype_origins thanks a lot... for answering my newbie question what about the cooler fans? I mean did you switch the AIO fan with lian li? (btw inspired by you I had build mine full white but using LIANLI AIO since I want the same fans cause that will be extra budget to use different AIO while changing it to lian li fan except I dont know something you know)
@@archetype_originsi didn’t even know the hyte y70 was a thing until this comment😅. Will you be selling pre-builds of it on your website? i’ll most definitely buy an all white y70 RGB build from you
@@twinflame2885 As much as we would like to offer prebuilts, we prefer working one-on-one with you to customize the builds according to your specific preferences and needs. If you need an estimate for the HYTE Y70 case, be sure to send an inquiry to us! archetypeorigins.com/inquiries
This PC was sold for about $4,000. If you are looking to get an estimate for your PC, kindly fill up the build inquiry form and we will get back to you as soon as possible! Thank you! archetypeorigins.com/inquiries
Hi i have just received that same lcd for my bday from my gf as a gift and i am wondering where to plug the power cable in i am having a hard time figuring it out 😅
archetypeorigins.com/archetypestore/p/pexxngp3utq8mszgm96ji5mqostrjk You can also send us a build inquiry if you’d like to customize it to your performances needs and aesthetic preferences! archetypeorigins.com/inquiries
We don't connect them. They separate, so we treat them independently, and they connect to the motherboard separately. For software, they also use their own independent software. Kraken uses NZXT Cam and Lian Li uses Lian Li L-Connect. We just do our best to make them the same color.
The wallpaper is custom, as it's the graphics for the business we built the PC for. They had sent is the graphics to use and have installed on their build. The software we ran it on is Wallpaper Engine from Steam. For the cords are you asking about the Lian Li Strimer cables or something else? All the parts are linked in the description box so let me know if it wasn't the Lian Li and we can figure out what you're looking for!
@archetype_origins thank you for replying ive done more research in the past few days and decided on the y70, my cord question was about the lcd's cords because I had heard about the sata power, melting the cords. Ultimately I decided to get the y70 so I didn't have to think about it and it would be the same price more or less
Rate this HYTE Y60 build from 1-10!🟡🔵
Solid 10
Those 120mm Fans in the back are awfull
zero
Solid 3
My wife wants a Y60 like this. Great Inspiration on what you guys built here. Like the parts and designs.
We're glad that you like it! Let us know if you end up building a HYTE Y60 PC for your wife!
Beautiful beast 😮
Sure is!😍
Ive watched a few of your vids.. you do damn good work i like your style..
Thanks! 🫡
Awesome pc build . Congratulation for 2K subs
Thank you so much for your support!
Woah man you edit n make videos as if your account has a few million subs ❤ keep up the good work i seen plenty of builds from u id like too redo into my own colors n etc, i love how you show n explain what you can
Thank you 🙏🏻 we are flattered that you find our videos on par with the bigger channels!
Cant figure out why my headset mic doesnt work on the front aux jack, fun stuff
Unfortunately the front panel only supports audio out does not support audio in
@@archetype_origins thanks for the reply, I picked up a simple aux to USB adapter and it worked out
That is awesome to hear! Congrats!
Where can I find the template/ live wallpaper for the LCD screen. I have this build on my hyte y60 but can’t seem to find a site that offers the templates.
We use wallpaper engines
I’m having trouble getting the RGB wiring for the lian li strimers powered, I have pretty much the exact same set up as this, same motherboard and everything, I know I’m missing something with them, but I can’t figure it out
Are you using the NZXT splitters for the Lian li hub?
@@archetype_origins no I thought that might work but the connections don’t match
@@MikeFiero88GTiam using the lian li hub plug in both strimer cables into the hub then plug the hub on a sata power connector and on one International usb Port on your motherboard (make shure to adjust the switch on the lian li hub to your preference)
@@MikeFiero88GTits just the 2 strimers to the lian li Box and the Box to the motherboard and power
I was gonna say, if you are using the NZXT splitters, please avoid using them as they would not work with your Lian Li Strimer and UNI Fans. Thank you @rocketgamer3878 for answering that, remember to flip the switch to correct direction of your strimer otherwise it would not work
I build the Same with RGB AIO on GPU and black Mainboard from Asus and AIO on CPU, i'm not a fan of custom GPU coolers anymore
Why are you no longer a fan ?
@@archetype_origins Most of the small coolers aren't that good as the bigger ones and sometimes you can't build it into all cases because of bad airflow and high temperatures or verry noisy radiators.
An AIO or custom Made watercooling setup beats this all, in most cases it's quiet, small formfactor, looks brilliant, better temperatures etc.
nice build bro..
Thanks Bro!
im planning to buy that psu but i havent seen much people review it, how is it???
Super awesome and good quality PSU for sure, we haven’t had any bad experience with Phanteks PSU, highly recommended!
I’m literally about to do a build just like this same MOBO and GPU too lol
It was a fire combo 🔥
How did you power the lcd screen?
With a molex cable that comes with it
@@archetype_origins thanks, didn't have a slot for a molex in my power supply so I just used a micro usb
Did you connect the micro USB cable to the USB 9pin on the motherboard? Or did you connect it to the psu with an adapter?
Can you link the cable model?
@@riceandnoodlelover
@@gunihk neither, I just used a 5V micro USB to USB A. Micro USB went into the screen and the routed the other side to the back of my computer
@gunihk here’s the link to the micro usb to usb A cable
amzn.to/48L4YIq
can i put a elgato 4K60 behind the graphic card? :D
I don’t think there’s enough clearance for that
oh !.. thanks !@@archetype_origins
You're very welcome!
What drill or screwdriver do you use the name, and where did you buy it? I'm looking for something like this, this one with the red handle.
Links in description!
How is this supposed to work if there is only one hdmi port on the gpu
You should use a DP cable for your PC to monitor as it supports higher resolutions, higher refresh rates, and more bandwidth than HDMI. If you're really trying to maximize the your PC DP is the better option
i have a question.
I have an i9 13900k , and my radiator will go on top of the case. should it be exhaust or intake? also does it matter very much? thank you.
Exhaust! Heat rises 🔥🔥🔥
@@archetype_origins Thank you, so i will do top aio exhaust, back 1 fan exhaust, bottom 3 and side 3 intake.
That is correct! 👍🏻
@@archetype_origins ♥️
hi, really love your build... still wondering where did you put all the Lian li 6 fans? 3 tops 1 rear 2 side? what about the AIO fans? thank you if you are answering my curiousity
1 rear exhausts
3 top exhausts
2 side intakes
@@archetype_origins thanks a lot... for answering my newbie question what about the cooler fans? I mean did you switch the AIO fan with lian li? (btw inspired by you I had build mine full white but using LIANLI AIO since I want the same fans cause that will be extra budget to use different AIO while changing it to lian li fan except I dont know something you know)
HYTE Y70 is coming :)
Tomorrow is the big day!
@@archetype_originsi didn’t even know the hyte y70 was a thing until this comment😅. Will you be selling pre-builds of it on your website? i’ll most definitely buy an all white y70 RGB build from you
@@twinflame2885 As much as we would like to offer prebuilts, we prefer working one-on-one with you to customize the builds according to your specific preferences and needs. If you need an estimate for the HYTE Y70 case, be sure to send an inquiry to us! archetypeorigins.com/inquiries
great video . lovely looking build , not sure you need so much thermal paste tho
It’s always better to have more than less
Has the same effect as not enough though
How do you alsp get the color changing schemes like that???
You can change them using the L-connect software by Lian Li!
Please price 🙏
This PC was sold for about $4,000. If you are looking to get an estimate for your PC, kindly fill up the build inquiry form and we will get back to you as soon as possible! Thank you!
archetypeorigins.com/inquiries
The phanteks 1000w PSU white edition is no longer available to purchase. Do you have a comparable suggestion/replacement you can recommend?
The DeepCool PX1000G is our go to
amzn.to/3VmbkcV
What would be the AMD equivalent to this motherboard?
The ASUS ROG Stix B650-A is our usual go-to for AM5 white motherboard: amzn.to/3rIsiGp
What could be the reason why all the taskbar icons are suddenly opened since I started using the case? although I don't touch it
Setting > Taskbar behavior > Automatically hide the taskbar ✅
I need this exact build 😍😍😍
You can check out this build on our website here:
archetypeorigins.com/archetypestore/p/pdmwskzb73iqndwgeyw0n36ujmurep
Hello , it's any chance to have your discord , please ? I have the same case and I think I install the Lian Li Fans wrong . 😢🙏
Please send us an inquiry at archetypeorigins.com/contact and we can arrange a time to assist you
Hey I have that LCD screen too but idk where to put the second cord at! I know the HDMI goes into the GPU but the other cord idk where
It goes into a Molex cable on your PSU
Hi i have just received that same lcd for my bday from my gf as a gift and i am wondering where to plug the power cable in i am having a hard time figuring it out 😅
We offer build consultation services if you’re looking to learn more about building your own system☺️
Wow how much for this??
archetypeorigins.com/archetypestore/p/pexxngp3utq8mszgm96ji5mqostrjk
You can also send us a build inquiry if you’d like to customize it to your performances needs and aesthetic preferences!
archetypeorigins.com/inquiries
Can a CD player be mounted inside? If so, which one ?
Unfortunately no, not for modern cases. However, you can get an external DVD drive like this for your PC! amzn.to/3FH0ndf
thanks 🙂@@archetype_origins
@@archetype_origins ohh another question, are there any of this model but with smaller sizes?
amzn.to/40Jiby3 this one is a better buy since it also comes with multiple USB and SD card slots
Hello, could you tell me if the NZXT Kraken Elite 360mm is good for cooling the 13900K? What would be the performance he showed in the games?
Yes! It would be better if you are doing a push-pull config
Brooo you did an amazing job, I have a question. Do you have a video showing how to connect the Kraken elite with the lianli fans sl inf? Thanks 🙏
We don't connect them. They separate, so we treat them independently, and they connect to the motherboard separately. For software, they also use their own independent software. Kraken uses NZXT Cam and Lian Li uses Lian Li L-Connect. We just do our best to make them the same color.
@@archetype_origins thank you soooo much!
Did you replace the stock bottom cans?
No we didn’t
Where did you get the stickers and everything else for the Itachi build. I’m looking for something similar for the Y60
We designed and made them ourselves!
What did software/wallpaper did you use for the last and what cords as well? I've heard people were melting the sata cable that ones with the display
The wallpaper is custom, as it's the graphics for the business we built the PC for. They had sent is the graphics to use and have installed on their build. The software we ran it on is Wallpaper Engine from Steam.
For the cords are you asking about the Lian Li Strimer cables or something else? All the parts are linked in the description box so let me know if it wasn't the Lian Li and we can figure out what you're looking for!
@archetype_origins thank you for replying ive done more research in the past few days and decided on the y70, my cord question was about the lcd's cords because I had heard about the sata power, melting the cords. Ultimately I decided to get the y70 so I didn't have to think about it and it would be the same price more or less
Solid choice by going with the HYTE Y70!
Could you inform me if this motherboard is DDR4 or DDR5?
DDR5
Is it bad that I thought your screwdriver was one of those salt and pepper grinders at first?
I need a tissue! I laughed so hard I'm tearing up! After watching it back, I can see how you saw that!
Nice vid & Edits , but man I’m stuck on i9 & 4070 bottling
Y70 is so much better due to size and room for my 4090, just saying.
We are excited to do a Y70 Touch build! It’s seems like an overall elevated case
Lol y’all should send that over my way
Hmmmmmm….. 👀
@@archetype_origins lol just a little hope had to try haha
We appreciate the thought 🙏🏻
Is it just me or is that ram xtra tall?
Probably just you😆
Yall guys need to stop putting theese 120mm fans in the back of the case 2 140mm are much better
Appreciate the input, that is a great idea! We will implement the 140mm fans next time we use the case!
11
🔥🔥🔥
if u are a real person you will give me a graphics card off of your wall.
We might be robots! 🤖