I have a problem when withdrawing camera recording from the NVR. Most of the time, it is removed completely, and most of the time it is withdrawn for only an hour or a day or two. What is the problem with the camera and the Hikvision type NVR?
How do configue if i install 5 cameras to a external switch gigabit 8 port to a lan port if the nvr already have a internal switch 8 port? I junt one one cable to my inside hone insted of 5
When you will be able to set up my cameras.i have hikvision NVR box and one camera dahua and two lorex cameras not sure how to make them work.how I can get in touch with you to arrange installation
@@bestsecuritydevices I understand hik connect works over internet..but how add the address hik connect camera to nvr different place..please show the example.. thx
Hi i have hickvision nvr ds 7600 series and a reolink dome RLC 520 camera, in the nvr hikvision i went to event selected the canera enable motion, selected all area click apply, it says error settings. What it can be? I dont understand 😕 motion cant enable it just continuos ruclips.net/video/GHLYhTTEA9g/видео.html
i have a nvr HikVision DS-7608NI-Q2/8P with a reolink rc 810a 4k camera. my camara record continuos ok. in nvr settings i cant activate event motion, when i click enable and then apply a error failed settings appeared ruclips.net/user/shortsERK1l9dr69A?feature=share
can i just say . ive been trying to install a full new system to my home with the IP system, now iam an engineer and done a lot of different projects over the years from building model helicopters to engine rebuilds on v8 and v6 engines . this is what bothers me! why do manufacturers of systems make these so complex to configure. you may think your explaining things well but sadly your not!
How do sharpen the Camera quality on the nvr? On.my hik connect appslightly blurred
How do I bring up The program you are using. I was able to do it ages ago but not anymore,
Can you put any ip address for the poe ports?
I have a problem when withdrawing camera recording from the NVR. Most of the time, it is removed completely, and most of the time it is withdrawn for only an hour or a day or two. What is the problem with the camera and the Hikvision type NVR?
I see you have the camera connected to the NVR.
Are you able to receive notifications to your phone for person detection?
yes
@@bestsecuritydevices how can i receive network breakout email notifaction , please
@@bestsecuritydevices how can i receive network breakout email notifaction , please
How do configue if i install 5 cameras to a external switch gigabit 8 port to a lan port if the nvr already have a internal switch 8 port? I junt one one cable to my inside hone insted of 5
One cable from the NVR Lan port to the switch.
I see it looks simple with the NVR with on board Poe... How do I add cameras when l connect to external Poe?
Remember some NVR comes with built in poe
What if I use an external device to power the camera, will the camera, still connect with the NVR?
How do i know my ip for the nvr cause i tried the 245 one but it is not working still
have you figured it out?
Bro Can I contact you somewhere. i have the same camera… i use the netgear external router too view cameras on my phone.. need to set up
How to connect via wifi to NVR?
How do i know which IP should i choose.where to get this from .can you set up my camera remotely.i pay you
I can set up your camera systems remotely for you.
When you will be able to set up my cameras.i have hikvision NVR box and one camera dahua and two lorex cameras not sure how to make them work.how I can get in touch with you to arrange installation
How do I connect the Hik Connect camera cctv to a different network NVR..( via internet)
Hik-connect already works over the Internet, no matter where the NVR is located.
@@bestsecuritydevices I understand hik connect works over internet..but how add the address hik connect camera to nvr different place..please show the example.. thx
how can i configure replacement of new ip camera to hikvision nvr
Just connect the camera directly to the NVR e it should automatically give it an IP and allow you to add it to the system
Hi why don't you enter the password camera?the dhcp is it anable in camera? Two please answer ❤️
Yes, the DHCP is enabled in the camera and the password is given by the NVR (it uses the same password for the camera).
how to add more than 8 camera in NVR hikvision?
You don’t
My one says unable to reach camera address
Very good for beginners i have no router yet
I had one ip camera is not working I just replaced a new iP camera and how do I setup and reprogram it’s thanks
Hi i have hickvision nvr ds 7600 series and a reolink dome RLC 520 camera, in the nvr hikvision i went to event selected the canera enable motion, selected all area click apply, it says error settings. What it can be? I dont understand 😕 motion cant enable it just continuos
ruclips.net/video/GHLYhTTEA9g/видео.html
Left out instructions if camera does not view automatically
Hi mate i moved to new shop and come with ip camera with password is it possible for me to unlocked please thanks
Need to reset it. The process vary depending on the camera model. Look for the camera manual online or how to reset the specific model you have.
i have a nvr HikVision DS-7608NI-Q2/8P with a reolink rc 810a 4k camera.
my camara record continuos ok.
in nvr settings i cant activate event motion, when i click enable and then apply a error failed settings appeared
ruclips.net/user/shortsERK1l9dr69A?feature=share
can i just say . ive been trying to install a full new system to my home with the IP system, now iam an engineer and done a lot of different projects over the years from building model helicopters to engine rebuilds on v8 and v6 engines . this is what bothers me! why do manufacturers of systems make these so complex to configure. you may think your explaining things well but sadly your not!
Totally confusing
Dude, no need to talk with your hands. Its distracting and annoying.
You are the only one complaining and the video is not done exclusively to you, so just don’t watch it… there are tons of other videos out there ;)
I liked your including hand gestures as a teaching aid. It’s something a non tech person can understand.