Trouble Code P0717

Поделиться
HTML-код
  • Опубликовано: 20 окт 2024

Комментарии • 42

  • @patriotgarage
    @patriotgarage Год назад

    Pooky got a raise for selling a transmission.
    That's what's wrong with our field.

  • @TRcustomengineering
    @TRcustomengineering 13 лет назад +1

    You work on saturns alot it seems.
    Another great video Rich stay safe in the storm.

  • @RichpinTv
    @RichpinTv  13 лет назад

    @campauchicken There is a steel mount under the pulley so it should never contact the subframe.Have you done a front brake job recently i ask because if the caliper is put back wrong the tire will hit the hose and make a noise.

  • @RichpinTv
    @RichpinTv  12 лет назад +3

    The scan does not give me the location of the sensor i use AutoZones web site for that.You can clear the codes with this scan tool.

  • @RichpinTv
    @RichpinTv  13 лет назад

    @dah97765 I do not have a video on the P0420 at this time.The most common thing is the catalytic converter itself is no longer functioning properly. The other likely thing is the rear oxygen sensor is no longer working properly. Exhaust leaks forward of the cat can cause this code also.

  • @dzutoob5466
    @dzutoob5466 12 лет назад +2

    Thank you making and showing for the informative video. You save money to car owners by troubleshooting these check engine lights. Questions : Did the scan tool give you the location of the sensor in the car once the diagnosis was made ? or what reference do you use to pinpoint the location? Can you clear the code by using the scan tool, or have to go to fuse box ? Thanks.

  • @RichpinTv
    @RichpinTv  13 лет назад

    @fotojerry The person just bought the car and only drove it 7-8 miles.I asked him if it was shifting odd he said he could not tell.

  • @mp6908
    @mp6908 13 лет назад +2

    Your video is very informative.... I have a 99 Kia Sportage which faiedl the inspection with code P0717. Would you be able to advice where the turbine sensor is on the Kia ? I appreciate any helpful info. Thanks very much

  • @uluz2a6
    @uluz2a6 4 года назад

    I have 0.1 volts on low wire and 0 volts on high wire. I have harness open and all looks fine. I have cut the wire behind the connector and same values. Do you know the pin location to the harness at the ECM? I would like to verify continuity.

  • @gunartomsons1840
    @gunartomsons1840 7 лет назад

    My 2005 Ford 500 LTD.Edition Auto 2 speed trans. comes up with AWD malfunction and amber anti skid light on the dash. Sometimes comes on after 2 minutes but last night I drove for 30 minutes before it came on and disengages my AWD. Is there a sensor for this or does the AWD require repairs? Love my car and hoping that this is not an expensive outcome.

  • @BluePlanetDrone
    @BluePlanetDrone 13 лет назад +1

    Great video as always Rich.

  • @TheXxXxX86
    @TheXxXxX86 2 года назад

    I have the same code on my 08 Toyota Highlander v6 automatic transmission, any advice where can locate the sensor please?

  • @TRcustomengineering
    @TRcustomengineering 13 лет назад

    @TRcustomengineering Wow, How is everything now? I'm in Delaware and we didn't get it too bad.

  • @wyattspop
    @wyattspop 6 лет назад

    Is this not overkill? The part is like $15, if you're under, why not just swap it?

  • @RichpinTv
    @RichpinTv  13 лет назад

    @hp11208 Yup all buttoned up

  • @RichpinTv
    @RichpinTv  13 лет назад

    @karlakatie2215 Thank for the info luckily it is the only place on the car that has rust.

  • @dah97765
    @dah97765 13 лет назад

    @richpin06a do you have any videos / advice on code 0420 - Catalyst Efficiency below threshold (Bank 1) ? I have been told that it may be the rear oxygen sensor, but I dont know for sure.

  • @Swimding
    @Swimding 13 лет назад

    Good video Rich, can you not use your OBDII scanner to clear the code? I have the 3120 and I can use it to turn off the MIL/CEL. :-)

  • @arielatom03
    @arielatom03 5 лет назад

    Hey i had this code on a kia rio; checked the power ground and did a bypass test on the signal ( its a pull down design ) and everything ckecked out ok so i replaced it and run fine afterwards. Two days later it comes back with the same code. What did i miss? Is there a mechanichal variable?

  • @RichpinTv
    @RichpinTv  13 лет назад

    @TRcustomengineering The hurricane is hitting right now as i am typing.

  • @dah97765
    @dah97765 13 лет назад

    @richpin06a the previous comment is concerning my 1999 Saturn SL, SOHC

  • @RichpinTv
    @RichpinTv  13 лет назад +1

    @Swimding You sure can

  • @RichpinTv
    @RichpinTv  13 лет назад

    @logyscott This is a new one.

  • @Bharlos
    @Bharlos 8 лет назад

    What if this didn't work for me, what else can I do?

  • @WWonclips
    @WWonclips 6 лет назад

    Hey Rich I have a 98 Saturn SL1 and I had the same code misfire I got the mechanic to fix it when I drove it the check engine light came back on he said my Saturn has two of these speed sensors is this true or a error on his part?

    • @RichpinTv
      @RichpinTv  6 лет назад

      I have this video showing the location of the vehicle speed sensor on a manual transmission ruclips.net/video/h_bf_QitHGs/видео.html

  • @sylvainperrault25
    @sylvainperrault25 13 лет назад +1

    Thanks a lot rich for all your good video ! :-)

  • @hp11208
    @hp11208 13 лет назад

    rich u prepare for the huricane up there

  • @TheJustinBurton
    @TheJustinBurton 7 лет назад

    Ray Romano. Is that you?

  • @Filmaker25
    @Filmaker25 13 лет назад +1

    A little more contact cleaner!?

  • @lauracf9002
    @lauracf9002 10 лет назад

    works for chevrolet cobalt 2006?

  • @timarchibald8285
    @timarchibald8285 7 лет назад

    Can this cause hardshifting ?

  • @RichpinTv
    @RichpinTv  12 лет назад

    @adventureoflinkmk2 I made it myself.

    • @WWonclips
      @WWonclips 6 лет назад

      richpin06a I have a automatic not a manual

  • @GT502BULLYKENNELS
    @GT502BULLYKENNELS 11 лет назад

    How do you know the resistant of the sensor?

  • @logyscott
    @logyscott 13 лет назад

    You always seem to be having problems with this Saturn. Either you're creating problems so you can tape it, or it's a real POS!