I used this video tonight to switch out the hid ballast on my is300 sportcross. it was a pain in the butt , took me 3 hours. but i did and the headlight works thanks to to you and this video.
This is exactly what I needed to see! I'll be replacing my turn signal bulbs soon and I was worried that removing the bumper was going to be a much bigger pain in the ass.
Very helpful video. My driver headlight just went out and my oven mitt hands for sure won't fir in that small space hahaha. Thank you for uploading this.
Thanks for the video! My wife just wrecked hers and it happens to have a headlight out as well. Great I watched this video before replacing the front bumper and having to take it off again to change headlight. That would have been a pisser!! Great video by the way. Informative and descriptive
Hey Winston, this was exactly what I was looking for. I have a collection of work that needs to be done on my 2004 IS300 and some of the work can be accomplished now that I've seen how easy it is to remove the bumper. Thanks brother!!!
I'm literally becoming self taugh about this car because of your videos , thanks alot they are really helpful, I'm beginning to learn this car inside to out because of you . I need you upload as much of the IS300 repairs / installs / replacements as you can man haha ! as a subs request can you make a playlist for all IS300 videos? So I can just watch all at once? If you can that'd be dope thanks man & keep it up you're a really good person .
Whoa!!! No music, no fluff??!! I love it! As unmechanically sound as I am, I’m gonna try this. Wish me luck! Also at the 2:38 mark, can you tell me where these 2 bolts are located? Thanks so much!
Thanks for the upload. Didn't have to remove the bumper to change my bulbs but this vid is 100% helpful because I'm getting new headlight housings to replace my old ones. 👍
Thanks bro , couldn't tell if I needed to switch the bulbs or the ballast but I know everything is original on my 02 so I'm going to switch out everything
at 10:21 what did you do to continue tightening the bumper to get rid of the gap? i noticed in the video it cut off and transitioned immediately to where you already tightened it and that’s the exact issue i’m having is trying to get that section lined up haha. thanks!
Good vid. I know my ballast is bad. I moved the in non working light to the working one and the bulb fires. Then then bulb in the working light the non working light, bulb does not fire. I wish you would have showed the ballast. I'm concerned that the ballast is in light housing and not as simple as being outside of it.
Quick question I'm going to install a new bumper for my IS 300.... The new one is already painted and on the driver side there seems to be a bracket that holds the bumper it broke off ... Do you know where I can get one??? To replace broken one ....
My Parking Sensor fell out & inside the car I was wondering if you have to take the bumper off to put it back in or just unscrew from the bottom & stick your hand in to reatach to the bumper
Winston, Thank you for the video, it help a lot when I was trying to change my bumber! but recently I had an issue with my ballast going bad. So I just wanted to ask, is it an easy process after you take out the headlight to change the ballast?
+ZFlyingVLover Nevermind. Theres a 10mm screw on the back of the lens that you can turn to move the inside of the lens forward and back so that you can pull out or put in the ballast connector.
I had a HID bulb go bad in mine (started turning purple and then finally went). I didn't have to take off the bumper but it was a pain in the ass. Sometimes I wish I had small chinese hands lol
LMAO. I'm korean, and i can change the bulbs without taking the headlight/bumper off. thank god im asian. but my ballast went out :( so i have to take them out anyway.....
Had to change my bulbs today, took awhile and it was a pain in the ass, but couldn't have done it without your video. Thanks bro!
I used this video tonight to switch out the hid ballast on my is300 sportcross. it was a pain in the butt , took me 3 hours. but i did and the headlight works thanks to to you and this video.
You really show the correct things. And the right light. So we can see properly. God bless you and your kindness. Have a great day!
This is a great video. I need to change out my wife Lexus headlights and worry about the bumper. Your video was so clear and detailed. Good job man!
This is exactly what I needed to see! I'll be replacing my turn signal bulbs soon and I was worried that removing the bumper was going to be a much bigger pain in the ass.
Very helpful video. My driver headlight just went out and my oven mitt hands for sure won't fir in that small space hahaha. Thank you for uploading this.
I just got this vehicle last week and I need to change out the passenger side fog light. Thanks for the tips.
You're welcome :)
Thanks for the video! My wife just wrecked hers and it happens to have a headlight out as well. Great I watched this video before replacing the front bumper and having to take it off again to change headlight. That would have been a pisser!! Great video by the way. Informative and descriptive
Hey Winston, this was exactly what I was looking for. I have a collection of work that needs to be done on my 2004 IS300 and some of the work can be accomplished now that I've seen how easy it is to remove the bumper. Thanks brother!!!
You're welcome, and thank you for watching my videos :)
Best video for front bumper removal for an IS300 that I’ve came across. Great vid!!
JRM8084 thank you :)
I'm literally becoming self taugh about this car because of your videos , thanks alot they are really helpful, I'm beginning to learn this car inside to out because of you . I need you upload as much of the IS300 repairs / installs / replacements as you can man haha ! as a subs request can you make a playlist for all IS300 videos? So I can just watch all at once? If you can that'd be dope thanks man & keep it up you're a really good person .
AyoKudo Sure, I'll do that when I get around to it :)
Great tutorial video. Clear audio and visual. thanks!
Whoa!!! No music, no fluff??!! I love it! As unmechanically sound as I am, I’m gonna try this. Wish me luck!
Also at the 2:38 mark, can you tell me where these 2 bolts are located? Thanks so much!
Thanks for the upload. Didn't have to remove the bumper to change my bulbs but this vid is 100% helpful because I'm getting new headlight housings to replace my old ones. 👍
Awesome! :)
Any advice on how to adjust the vertical aim for the low beam? My driver's side is much too high.
I would look up Eric the Car Guy because what he used was the lines on his garage door. I would've done the same
Just because u made this video u won our sub ... congrats 👏
Thanks bro , couldn't tell if I needed to switch the bulbs or the ballast but I know everything is original on my 02 so I'm going to switch out everything
at 10:21 what did you do to continue tightening the bumper to get rid of the gap? i noticed in the video it cut off and transitioned immediately to where you already tightened it and that’s the exact issue i’m having is trying to get that section lined up haha. thanks!
Yes, I made sure to tighten ALL of the fasteners as tightly as possible
Great video, thanks brother. Now I feel confidence to replace my 2001 IS300 Ballast :D
Thanks for the video, everything was clear and the quality was great
Will help greatly on replacing my friend's ballasts..
You're welcome :)
Hello to replace the amber turn signal bulbs in the headlights, can they be reached by hand by removing the fender liner? Thanks.
Good vid. I know my ballast is bad. I moved the in non working light to the working one and the bulb fires. Then then bulb in the working light the non working light, bulb does not fire. I wish you would have showed the ballast. I'm concerned that the ballast is in light housing and not as simple as being outside of it.
sweet, helped with my 02 sportcross, thanks man
Gigantic Weiner You're welcome :)
Thanks for this vid! Very informational. 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼
Glad it was helpful! 😀
Any tips on fixing floppy sun visor? Won't stay up.
+joelg125 If I can find one, I will most defnitely make a video on it
man, i really needed this. thanks man.
You're welcome :)
having trouble putting the bottom screws back in to secure the bumper to the liners
Quick question I'm going to install a new bumper for my IS 300.... The new one is already painted and on the driver side there seems to be a bracket that holds the bumper it broke off ... Do you know where I can get one??? To replace broken one ....
If Rockauto.com or eBay doesn't have it, then junkyards are your next best bet
Winston Buzon orite thanks man
Not noches. Notches Simon guey hahah . Cool video
Might be getting one of these soon
Great video! Could you recommend a good brand to buy off the internet? Thanks
Clear procedures. Thank you.
You're welcome
Didn't you have to disconnect the battery? I just thought about the airbags. Thanks
+Jeff Guevara No I didn't have to
Thanks for the info. Will try to do mine
Thanks dude, really helpful 👍👍
You're welcome 😁👍
My Parking Sensor fell out & inside the car I was wondering if you have to take the bumper off to put it back in or just unscrew from the bottom & stick your hand in to reatach to the bumper
it's inside the car*
If you can remove the bumper cover and fender wells without having to remove the bumper you should be okay
+Winston Buzon (DubEezy) Oh ok thanks for the help
Do you know what the bulb above the low beam does or if it’s just a parking light?
Not sure...
At 2:40. Where are those bolts? I'm trying to remove my headlights and I can't find them
Behind the headlights but underneath after you loosen or remove the bumper cover.
+Winston Buzon (DubEezy) Thanks man, I just hadn't pulled enough of the cover back yet haha. Great video by the way.
+Joe Hamm You're welcome and Thank you :D
This is the best look for any turbo is
hey i am going to install my new bumper and i was wondering if i have to remove the headlights in order to install it?
I didn't
@@winstonbuzon ok thanks
Winston,
Thank you for the video, it help a lot when I was trying to change my bumber! but recently I had an issue with my ballast going bad. So I just wanted to ask, is it an easy process after you take out the headlight to change the ballast?
Once you take out the headlight, its easy to replace the ballasts
Thank you!
Man you are awesome!! Thank you for this.
Thank you and You're welcome :)
thanks for posting this
You're welcome :)
Great video! Thank you!
Thank you and you're welcome. :)
When u buy new headlights do they come with lights installed in then?
My headlights are still original so I wouldn't know for now
Where did you get the bulb?? How much
@@MyAsainboy about 50 bucks a piece for the bulbs and ballasts
I can't figure out how to remove and then install a new ballast without opening the lens itself. Any tips?
+ZFlyingVLover And I am afraid to have to use a heat gun to soften the lens. Is that the way?
I didn't have to remove the lens. I just unscrewed the bulb then the harness
+ZFlyingVLover Nevermind. Theres a 10mm screw on the back of the lens that you can turn to move the inside of the lens forward and back so that you can pull out or put in the ballast connector.
Good job! Thanks, man!
hows it going how can I upgrade from stock headlight bulbs to led lighting? help! thanks
I have a 2001 is300 I just bought it and I want to get brighter
Never tried, but HIDs are already bright though
can you recommend a set for me? hi beam and low beam that are strong?
@@joselloya7843 Just stock ones are pretty good. Now if you wanna go aftermarket, there are so many to choose from
I replace the bulb but it still doesn't work how do I know it's the ballast?
If you replaced the bulb and it still doesnt work, then its the ballast
+Winston Buzon (DubEezy)
$600 for ballast at the dealership!!! Yikes.
+joelg125 I went through a local shop that sells aftermarket replacements. I got my bulbs from there
Got mine from Amazon. www.amazon.com/gp/product/B017MTV8ZM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Nice!
I had a HID bulb go bad in mine (started turning purple and then finally went). I didn't have to take off the bumper but it was a pain in the ass. Sometimes I wish I had small chinese hands lol
+Garrett Martin Lol!
I'm asian and I don't got no chinese hands :(
LMAO. I'm korean, and i can change the bulbs without taking the headlight/bumper off. thank god im asian. but my ballast went out :( so i have to take them out anyway.....
Yes the bumper is a PITA
ty
yw
Just for the bulbs?!!... Dude! you don't have to do all that... I got it without removing the bumper. Too much work for that bs.
Today I learnt how to take my bumper off my car 😂🙄. #2004TOYOTAALTEZZA #1GFE. #6SPEEDMANUAL.
RX300 1993-2003
Buenas noches lmao 🤣
usually how long would it take to remove my bumper and fender with the right tools ?
No more than an hour if you have the right tools. If you have power tools, even faster