Original Full Review w/ specs, pricing, close up shots, etc: www.gbgunsdepot.com/post/bul-armory-axe-c-hatchet More about the optic: www.gbgunsdepot.com/post/pistol-optic-selection-viridian
My husband and I, never thought about purchasing one of these pistols. Looks like a well made pistol 🤔. Thank you both for sharing this video. Tell Teys I, enjoy the scenery at the firearms range. To me that's the scenery and the simple range is fantastic. 🙏🙏🙏🙏
Appreciate all your and Teya's videos. Im a fan of this Bul Hatchet and the Lone Wolf Dusk 9. On the fence between these and would be interested in your thoughts on the matter-
Both good guns that are built on a Gen 3 Glock pattern, so parts are widely available. I think the BUL has a little nicer fit and finish. If grip size is a concern the Dusk 19 is slimmer and possibly lighter.
I have watch intensely the videos from you on this pistol. I purchased the hatchet full size for the longer grip. Did you get the trigger pin walking out problem fixed?
Has this sight held the test of time? Seriously considering buying one , i Need a solid budget option for my dagger. Its viridian so the customer service seems promising .
Here's the lineup I've tried and some notes on them: www.gbgunsdepot.com/post/pistol-optic-selection-viridian the only one I've had any issue with was the RFX11 (tiny one)
The new trend willbe "say no to Dingus triggers' Long Live Sig Sauer P22X metal hammer fired line. AND adjustable side palm panels like H&K VP9 line and the humble Steyr M9-A2 MF. Thank for showing us OTHER marques. I'm here for your presentation, not the item featured . ✌️
I picked mine up on May 9th, and just finally was able to shoot it 3 days ago on Wednesday. The striker broke clean in half, on the 22 round(factory ammo only).I sent them an email with pic, explaining what happened,and how do they want to proceed with this.I waited till late Friday morning and still no response, so i called them and their phone just rings and then says they're busy assisting other customers, so i left a message of what happened and to please call me, and they never called. I ordered a striker because bul Armory is making it blatantly obvious that they're not interested in honoring the 1 year warranty after spending a substantial amount of money on their products. I'm completely disappointed and pissed off, angry with bul Armory because i don't tolerate manufacturers screwing their customers, very well. I'll be filing complaint with the better business bureau for sure. I've seen other people in comment section on other bul vids get screwed too, so I'm not the only person.I will also add that my trigger is the worst I've ever felt on any of my guns. While pulling the trigger slowly through the pre-travel, it is extremely gritty and chattery and after the break, it is just gritty through the reset. I've looked at everything closely, and it's because the top of the trigger bar has burrs/sharp edges on it from hitting into/gouging the slide in front of the safety block and on top of the safety block is a big tit from being cut off from the tool.Since they do not honor their warranty, I went ahead and sanded the tit off,deburred /polished the safety block, trigger bar, connector, crucifix , and the grip frame where needed. I eliminated most of the grit and chatter but i can't stop the trigger bar from hitting the slide, unless changing parts which i am going to do, because bul armory doesn't have the quality they claim to have or that I've watched everyone say they have, .I'm also the 1st person that I'm aware of, too have an extremely bad trigger. Anyways i know this is a long rant but my interest in this POS pistol has been shattered ,and this is my 1st "Glock"pistol but it didn't take me long to figure out that Glock or bul armory doesn't have the "Glock perfection"system they think they have. I've seen videos with nothing but trigger/reliability issues with Glock too, so how can Glock claim to be the most reliable pistols? I replaced my solid, completely reliable, issue free iwi Masada with this garbage, and now I'm regretting it.
If your axe pistols break, don't expect bul armory too fix them. Chances are that they will not even respond to you. I'm thinking that it's because if you notice, they do not even have a single part for the axe, on their website. I'm fkn angry with them because i have a $695 dollar POS paper weight at the moment. A broken striker after 21 rounds, and have to replace at my own expense.
I am one of the supposedly few people who have had a horrible experience with my FS Axe Hatchet. The barrel was marred with what looked like a grinder. It failed to go into battery with different grain ammunition (115, 124 fmj and HP), magazines, and different shooters. The gun failed to feed. The gun felt amazing ( ergonomics) but performed like 💩!!! This is one of the biggest disappointments in a gun I have experienced!
@GBGuns I've sent multiple emails about it and haven't heard anything back from Bul armory. , here's my order number #BA-QFZFY12 and serial number for the gun BAU-H700. If you are a authorized dealer, please fix this! I have receipts and pictures of my complaints about this unreliable firearm!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Original Full Review w/ specs, pricing, close up shots, etc: www.gbgunsdepot.com/post/bul-armory-axe-c-hatchet
More about the optic: www.gbgunsdepot.com/post/pistol-optic-selection-viridian
I always enjoy her insight and opinion
I didn't think it was possible to make that handgun look better, the red dot really matches the slide!
Thank you, Teya! 👏🏼👏🏼👏🏼👏🏼
My husband and I, never thought about purchasing one of these pistols. Looks like a well made pistol 🤔. Thank you both for sharing this video.
Tell Teys I, enjoy the scenery at the firearms range.
To me that's the scenery and the simple range is fantastic.
🙏🙏🙏🙏
She's baaack! 🏆 Not a fan of strikers but I'd give this one a go.
How about the gun?
I enjoy the interaction between you two, very informative.
Are you going to review the ported Tomahawk version? That's the one that has me intrigued
Great demo of why you never assume the gun is safe with the slide closed.
Appreciate all your and Teya's videos. Im a fan of this Bul Hatchet and the Lone Wolf Dusk 9. On the fence between these and would be interested in your thoughts on the matter-
Both good guns that are built on a Gen 3 Glock pattern, so parts are widely available. I think the BUL has a little nicer fit and finish. If grip size is a concern the Dusk 19 is slimmer and possibly lighter.
I have watch intensely the videos from you on this pistol. I purchased the hatchet full size for the longer grip. Did you get the trigger pin walking out problem fixed?
Yes, after a few warranty calls the frame was replaced
Are you going to review the new ported version? That's the one that interests me.
Possibly. A ported 4" would let me compare evenly, but I don't like losing velocity below where 9mm should, so maybe the ported full size
@@GBGuns yes to the full size ported review
Has this sight held the test of time? Seriously considering buying one , i Need a solid budget option for my dagger. Its viridian so the customer service seems promising .
Here's the lineup I've tried and some notes on them: www.gbgunsdepot.com/post/pistol-optic-selection-viridian the only one I've had any issue with was the RFX11 (tiny one)
How's the Viridian RX 35? On the fence about it since it's a bottom battery load dot.
We like it. We'll have a Viridian guide out later this spring (IWA trip is eating two weekends that otherwise might have had range time)
The new trend willbe "say no to Dingus triggers'
Long Live Sig Sauer P22X metal hammer fired line. AND adjustable side palm panels like H&K VP9 line and the humble Steyr M9-A2 MF.
Thank for showing us OTHER marques. I'm here for your presentation, not the item featured . ✌️
Have you shot the BUL Armory Cherokee Full size ?
No I have not.
Please check out another G19 G3 clone. Combat Armory CA19!
"it felt empty".......just like an AK?
👍🏻👍🏻🇺🇸🇺🇸💯💯🔫🔫☕️☕️
1st up
I picked mine up on May 9th, and just finally was able to shoot it 3 days ago on Wednesday. The striker broke clean in half, on the 22 round(factory ammo only).I sent them an email with pic, explaining what happened,and how do they want to proceed with this.I waited till late Friday morning and still no response, so i called them and their phone just rings and then says they're busy assisting other customers, so i left a message of what happened and to please call me, and they never called. I ordered a striker because bul Armory is making it blatantly obvious that they're not interested in honoring the 1 year warranty after spending a substantial amount of money on their products. I'm completely disappointed and pissed off, angry with bul Armory because i don't tolerate manufacturers screwing their customers, very well. I'll be filing complaint with the better business bureau for sure. I've seen other people in comment section on other bul vids get screwed too, so I'm not the only person.I will also add that my trigger is the worst I've ever felt on any of my guns. While pulling the trigger slowly through the pre-travel, it is extremely gritty and chattery and after the break, it is just gritty through the reset. I've looked at everything closely, and it's because the top of the trigger bar has burrs/sharp edges on it from hitting into/gouging the slide in front of the safety block and on top of the safety block is a big tit from being cut off from the tool.Since they do not honor their warranty, I went ahead and sanded the tit off,deburred /polished the safety block, trigger bar, connector, crucifix , and the grip frame where needed. I eliminated most of the grit and chatter but i can't stop the trigger bar from hitting the slide, unless changing parts which i am going to do, because bul armory doesn't have the quality they claim to have or that I've watched everyone say they have, .I'm also the 1st person that I'm aware of, too have an extremely bad trigger. Anyways i know this is a long rant but my interest in this POS pistol has been shattered ,and this is my 1st "Glock"pistol but it didn't take me long to figure out that Glock or bul armory doesn't have the "Glock perfection"system they think they have. I've seen videos with nothing but trigger/reliability issues with Glock too, so how can Glock claim to be the most reliable pistols? I replaced my solid, completely reliable, issue free iwi Masada with this garbage, and now I'm regretting it.
If your axe pistols break, don't expect bul armory too fix them. Chances are that they will not even respond to you. I'm thinking that it's because if you notice, they do not even have a single part for the axe, on their website. I'm fkn angry with them because i have a $695 dollar POS paper weight at the moment. A broken striker after 21 rounds, and have to replace at my own expense.
Email and call their office during business hours. One of my four had issues and it was fixed.
I am one of the supposedly few people who have had a horrible experience with my FS Axe Hatchet. The barrel was marred with what looked like a grinder. It failed to go into battery with different grain ammunition (115, 124 fmj and HP), magazines, and different shooters. The gun failed to feed.
The gun felt amazing ( ergonomics) but performed like 💩!!! This is one of the biggest disappointments in a gun I have experienced!
Did you make as much effort with the warranty as you have apaming this comment?
@GBGuns I've sent multiple emails about it and haven't heard anything back from Bul armory. , here's my order number #BA-QFZFY12 and serial number for the gun BAU-H700. If you are a authorized dealer, please fix this!
I have receipts and pictures of my complaints about this unreliable firearm!