E-22 Error Code Technical Micro Course - Henny Penny LOV Fryers

Watch Sr. Technical Trainer Scott Hughes thoroughly explain the reasons behind the E-22 error code. This error code appears in LOV gas fryers used by McDonald's. In this micro course, Scott goes over what triggers this error code, what you can do to troubleshoot it and how you can prevent it from happening again.
To find replacement parts for this piece of equipment, please visit www.hennypennyhelp.com
For further assistance please contact your local Henny Penny distributor www.hennypenny.com/sales-serv... or our Technical Support team at [e-mail]

[@feetuanvan3812]

thanks

[@HennyPennyService]

You're welcome!

[@xaivergb]

Thanks for the video, is there one coming about flame rollout? Can this error code be caused by a clogged pilot? or bad flame sense?

[@HennyPennyService]

Flame rollout is generally caused by an obstruction in the flue exhaust, more specifically in the plenum. Please contact your local Henny Penny distributor for further assistance or our technical support department at [e-mail]

[@gonzales2901]

What if the error happens as they’re using the fryer at random points did the oil get too low?

[@HennyPennyService]

HI @gonzales2901 if this is on a gas fryer, we can see this error happen more often throughout the day if the oil is low. The unit heats for several minutes, but never sees a temp rise at the probe because the oil is not touching the temp probe. If this is on an electric fryer and you get intermittent E-22 errors through the day, then check if power cords are plugged in all the way or unplugged. LOVs in some countries pull voltage to the controls through a separate cord. Even though the control is working, the large 3 phase power cord may not be making connection or plugged in. Hope this helps.