Installing Graylog 5.1 on Ubuntu Server 22.04 LTS
HTML-код
- Опубликовано: 19 авг 2024
- The first in a series of videos using and exploring the many features of Graylog.
Link to Install Commands
gist.github.co...
Graylog 5.1 Install
go2docs.graylo...
OpenSearch 2.X Install
opensearch.org...
MongoDB 6.X Install
www.mongodb.co...
Install Slides
docs.google.co...
Music by Me
/ ooehw
Image by Freepik
www.freepik.co...
Best graylog install totorial I've seen in years
Thank you, that's what I'm going for.
Thank you so much for such a comprehensive guide. You put all the pieces together.
Thank you for the video. I will say that it might be worth mentioning the system requirements. I did every step and all was showing as working and I could not get the web interface to come up. I went over the services and found that MongoDB was no longer working. I then realized that it started as active and then quickly stopped in my case which is why I didn't notice the issue right away. I then tried to reinstall MongoDB several times which would constantly fail and almost gave up until I found somewhere that MongoDB required a CPU with AVX support and 20 gigs of RAM. I made changes to my VM which is running in Proxmox BTW and it finally came up. Great video, just felt it was worthing sharing my experience here in case others run into problems.
Yeah i actually ran into this issue with my unraid setup, my cpu didnt support AVX, unfortunately i found that out after i made the video. Thanks for the watch!
Thanks man, this was really helpful!
Thank you very, very much.
Your presentation and steps are great. Even the official documentation is very confusing.. 🙂
Just one thing to everyone running this on a Proxmox VM. You will need to enable to choose a CPU instruction set that has the the AVX CPU flag enabled. If this is not done, then OpenSearch will not work.
Hello, where can I enable this AVX flag on the processor in proxmox?
I understand that graylog cannot be installed on the lxc container in proxmox. I've been struggling with this for a few days and it just doesn't want to work
@edekedkowski5952 I did mine on a VM, there is an option in the CPU part of the VM setup.
Nice video ^^ Many thanks. i think this is best graylog install tutorial !
By the way, the music is good too :) it feels cozy, thanks
Hey thanks! That's awesome. Kinda was a last minute add but I had been working on the track for the last couple weeks .
Thankyou for your video great explaining and demonstration you'r the best !
Thanks, this was solid. Only issue I ran into was my hardware. Mongod 5.x and higher needs the CPU AVX instruction set. Had to change my VM CPU to host whew. If anyone runs into mongod not starting, in the output from 'systemctl status mongod' look for:
Main PID: xxx (code=dumped, signal=ILL)
You can check your CPU with:
grep -qm1 '^flags.*avx' /proc/cpuinfo && echo OK || echo NOT OK
I'm getting same problem; "grep -qm1 '^flags.*avx' /proc/cpuinfo && echo OK || echo NOT OK
NOT OK
"
@@innocentbinwa4364 You need a CPU that supports AVX extensions for mongod =>5.x
Mercii beaucoup, tout fonctionne parfaitement, très bonnes explications !!
ThankYou!
perfect guide thanks. subscribed.
Thanks for the nice vid, appreciate if you could create another video on how enable TLS/https on the login page.
Really good, but could you help me with one question please? I set up the GUI but how do I connect my other servers? Do they need a agent?
Thank you very much
I completed getting Graylog, Opensearch, and Mongodb up and running with certificates just before you released this video :(
Great video though, and since I had installed graylog-5.0, I used some info here to upgrade to 5.1, so thanks for that! I have watched nearly all of your graylog videos. Do you intend to cover pipelines any time soon? I'm working through it, slowly lol.
Thanks, Yeah streams, then pipelines. Just taking a bit to find the time.
@@fordayinlife Take all the time you need, your videos are worth the wait.
Hello, can you make a video about configuring HTTPS?
On the list
Great recording.
I followed every single step as shown in the video today but I am unable to connect to the graylog Web GUI.
Double checked all the configuration still unable to connect.
Any tips on how to fix this?
Did you change the bind address in the graylog server.conf file and restart graylog?
Did you end up being able to connect to the graylog web GUI? I am struggling with the same thing
same error here... any tips?
Are you running this in a VM? Check your mongodb service. it's probably not running and threw an illegal instruction. I was running mine in Proxmox and dug forever to find out Mongodb 5&6 need AES instruction set. Had to update my Proxmox VM settings to use Host CPU type and enable the AES flag. (My cpu supported it thankfully)
Are you running this in a VM? Check your mongodb service. it's probably not running and threw an illegal instruction. I was running mine in Proxmox and dug forever to find out Mongodb 5&6 need AES instruction set. Had to update my Proxmox VM settings to use Host CPU type and enable the AES flag. (My cpu supported it thankfully)@@ownadorfail
good video, but I'm running into an Error.
Heya, any ideas on how to add https certificates?
999 Almost breaking 1k
I definitely haven't been checking every 15mins..😂
My password never works on the web login after I create the hash and update the config file
Make sure you copy it exactly, 1 digit off will break it. Also make sure you restart graylog-server... Run the the command again to generate the hash
@@fordayinlife Thanks for the reply and the great video. I'm sure it is
something I must be doing wrong. This is why I hate linux.
@@fordayinlife is there a way to login with a blank password?
@@TheDuppyman no you need to set something
@@fordayinlife Probably you swapped the two hashes. In the video the first hash is the secret which is the second hash he generate.
the video is only 4 months old and none of the mongodb commands works haha
I did a LibreNMS install video and 1 day after I released it they added another command to the install process. Lol I'll update the docs at least with what is wrong..