Troubleshooting INF6 Fault on Altivar 61 & 71 Drives | Schneider Electric Support
HTML-код
- Опубликовано: 29 июл 2018
- Welcome to our Schneider Electric tutorial! In this video, we'll guide you through troubleshooting the INF6 fault on Altivar 61 and 71 drives. The INF6 fault, often an internal option fault, can be traced back to issues like loose option cards or the simultaneous installation of two serial cards.
➡️Watch and learn as we delve into the intricacies of Altivar drives and provide step-by-step solutions to resolve this common issue.
🔔 Timestamps:
0:11 - Introduction to INF6 Fault Code
0:21 - Checking INF6 Status on Keypad
0:32 - Troubleshooting Options and Identification
1:21 - Terminal Block Inspection
2:12 - Final Checks and Recommendations
🔗To learn more, please visit the Schneider Electric FAQ: spr.ly/SchneiderElectricfaqs/F...
---------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 DISCOVER JOB OPPORTUNITIES
---------------------------------------------------------------------------------------------------------------------------------------------------------
➡️ Job Opportunities: spr.ly/SE-Careers
---------------------------------------------------------------------------------------------------------------------------------------------------------
👋 GET TO KNOW US BETTER
---------------------------------------------------------------------------------------------------------------------------------------------------------
➡️ Global Website: spr.ly/SchneiderElectric
➡️ Discover our Services: spr.ly/SE-Services
➡️ Visit our Blog: spr.ly/SE-Blog
➡️ Click here to subscribe to Schneider Electric: / schneiderelectric
---------------------------------------------------------------------------------------------------------------------------------------------------------
⚡ GET IN TOUCH VIA SOCIAL MEDIA
---------------------------------------------------------------------------------------------------------------------------------------------------------
➡️ LinkedIn: / schneider-electric
➡️ Facebook: / schneiderelectric
➡️ Twitter: https: / schneiderelec
➡️ Instagram: / schneiderelectric 
Наука
Can you make video about Overbreking fault a Igbt fault
Pl guide when I start motor n try to control its speed with potentiometer..it don't control speed n disply -41.6 hz at lcd n motor rpm goes very high like 2000 rpm..
Nice sir
Please Give me reasons for the CNF alarm in VFD
How to do Auto tune please help me out. I hv a project and it requires me to do Auto tune on the Drive
Drive in stop conditions, but output phase to phase 32v dc comming ,how to rectify the problem, but when we are given start command motor run , but drive stop conditions, output dc voltage coming,
can you please upload a video about INF9 ??
Thank you for your message Hassan. We house most of our documentation in a virtual database here: spr.ly/6050TX4S0. If this does not address your concerns, please reach out to a technical support person in your location. spr.ly/6052TX4S2
Plz show how to adjust multi pump card setting for pump sequence.
I was getting inf8 fault what to do
Watching your video. How you fix the inf3?
Thank you for your message. We apologize for any inconvenience caused. For technical support or to find answers to your questions, please refer to our support center: www.se.com/ww/en/work/support/support-center.jsp or reach out to a technical expert in your location here: www.se.com/ww/en/work/support/country-selector/contact-us.jsp
Who to solve 3 output phase loss error
We have a problem in our MX eco pDrive. The fault is E34. Could you please give us some advise how fix that error. Thank you.
For the PDrive you can contact EMA
in Norcross, GA. Phone: 1-800-848-2504.
Kevin McDonald okay, thank you very much
In altivar 61 fault blinking 1LF can pls axplan about this
Thank you for your message. We apologize for any inconvenience caused. Our customer care team would be happy to provide assistance. Please reach out to a customer care member in your location here: www.se.com/ww/en/work/support/country-selector/contact-us.jsp
How about INF3 int serial link alarm?
Thank you for your message Armando. We house most of our documentation in a virtual database here: www.se.com/ww/en/download/. If this does not address your concerns, please reach out to a technical support person in your location.www.se.com/ww/en/work/support/country-selector/contact-us.jsp
how to set the Altvar 71L angle error?
Thank you for reaching out. Please refer to your local Schneider Electric support team for further assistance.
spr.ly/6058HpHJ6
How to solve FLU
Good morning sir,
We are facing the problem on Altivar 71 ( Drive overheat).
Thank you for your message, Green Dot Pk. We apologize for any inconvenience caused. For troubleshooting support or to express your concerns, please reach out to a technical expert in your location here: www.se.com/ww/en/work/support/country-selector/contact-us.jsp
i have altivar 71 and the fault is inf 8, any solution to solve the problem?
Thank you for your message, Jeremiah. We apologize for any inconvenience caused. For troubleshooting support or to express your concerns, please reach out to a technical expert in your location here: www.se.com/ww/en/work/support/country-selector/contact-us.jsp
Does that clear out the SCF2 fault too?
Est ce que cela efface également le défaut OBF
Hi, I have the fault inf8, can help me?
Thank you for your message. We house most of our documentation in a virtual database here: www.se.com/ww/en/download/. If this does not address your concerns, please reach out to a technical support person in your location.www.se.com/ww/en/work/support/country-selector/contact-us.jsp
Dizel Janretar 160hp foult no 61
There is a Modbus card that is not seated properly, gives error 6. I do not use comm car. How can I disable option card in the menu? is it possible? Or Will I disassamble comm card?
Thank you for your message. We apologize for any inconvenience caused. For technical support or to find answers to your questions, please refer to our support center: www.se.com/ww/en/work/support/support-center.jsp or reach out to a technical expert in your location here: www.se.com/ww/en/work/support/country-selector/contact-us.jsp
Thank you for your message. For technical support or to find answers to your questions, please refer to our support center: spr.ly/6056zU5hG.
I want to know brake fault why come?
Thank you for your message. We apologize for any inconvenience caused. Our customer care team would be happy to provide assistance. Please reach out to a customer care member in your location here: www.se.com/ww/en/work/support/country-selector/contact-us.jsp
please can someone tell me what is causing the inf6 fault
Thank you for your message. We apologize for any inconvenience caused. For troubleshooting support or to express your concerns, please reach out to a technical expert in your location here: spr.ly/6056MPvXI
Lnf8?
Auto tuning is failed what is the problem
Thank you for your message Naresh. We apologize for any inconvenience caused. For troubleshooting support or to express your concerns, please reach out to a technical expert in your location here:www.se.com/ww/en/work/support/country-selector/contact-us.jsp
Parameter jog
Video blur