Emulsion RC shock set up. Arrma shock maintenance. Removal and repair.
HTML-код
- Опубликовано: 9 фев 2025
- For an "above and beyond answer to your questions" ask here:
asqme.com/@Eas...
find your parts here first - Organized Storefront
www.amazon.com...
East Tactics MERCH (Shirts etc)
east-tactics-shop.fourthwall.com
ARE YOU INTERESTED IN THOSE TOUCH SPRINGS?
Watch this video to get the detials
• Shock Spring Experimen...
Buy them here:
10lb 1631 Springs - ORDER 4 (ATTN! - Require a Dremel to modify/flatten Ends!!!)
(5000 or 3000cst diff fluid all around (your choice) and for sure recommended M2C caps/pistons)
www.mwcomponen...
Did you know I host jump Challenges every Year!
Check out my website - www.easttactics.com
Yes... every year in April, May, June, July and August - WIN BIG prizes
This last August someone won over 1000 in RC sponsored goodies.
Simply Subcribe to my channel - and you'll be in the know!
im convinced your algorithm is reading my mind
😂😂😂
Another killer video great way to demonstrate I will be sharing
I have a v5 Kraton and when looking to buy emulsion shock caps I noticed the EXB caps have what appears to be a better quality O ring than Hot racing or M2C. So I ordered the EXB caps. It appears like the ring has a flat spot on it to help seal, we will see when I get them 👍
Ya let me know once you get it. I’d be curious what you think
Very good how to on the M2C shock cap and bleed process
It goes down a little from the lubed rod pumping miniscule amounts evaporating. When it goes in dry and comes out wet over time stuff just disappears . 😂
M2c needs to sell shock shaft upgrades for the 6s like they do for the 8s. We desperately need 5mm shock shafts. I just switched up to the rcawd shock for 6s but they are a little short in the front but the shafts have lasted longer so far lol. I'd love to have the m2c caps, pistons, and 5mm shafts. That would be freaking amazing.
Agreed!!!
All of my M2C emulsion shocks leak from the bleeder screw. ALL of them. Emulsion means the mixture of two or more liquids that normally do not mix. Like oil and water. Air is supposed to mix with the oil, carry tiny bubbles in the oil that compress when the shock rod takes up space when the shock is compressed. That gap of air is normal and is why racers that use emulsion shocks will push their car down a bunch of times before a race. They’re mixing the air/oil (priming the shocks)
@@RC_Berserker
The bleeder screw 🤔
Good to know
Where’s the rubber boots to keep the rods clean ? They keep the shock oil clean of the rod is clean not bringing in small particles over hours of use . I wanted to say them M2c pistons work great on arrma 4s shocks without the bladder . Calms the landing bounce a lot .
Yeah, I need to buy me some new boots. I just get lazy and when they rip, I don’t put them back on.
Hi is there away to set LVC on Blx185 mine keeps going to LVC at 3.7 v
Watch this video:
LvC is the first setting. As pointed out at 8:25 in this video.
ruclips.net/video/0TaUS5HEGRw/видео.htmlsi=gui9n3qOVAo-1PA_
But watch the whole video, while it doesn’t explain directly how to change the LvC setting (setting 1)
It does explain how to set the punch, the brake, etc.
the same method applies for the LvC.
To find the settings different lvls. You can go to arrma site
Www.arrma.com
Scroll to the bottom and look for the link called “manuals”
In there you can find manuals for all there rigs
Be sure to check the box for discontinued.
There you”ll find written instructions and what options for LvC are available.
You can set it to 3.5 i believe, not sure.
🤜🤛
Many thanks my kraton v4 go's to lvc at 3.7v have most of my 3s arrma set to 3.2 v never had problem with 3.2v why does v4 lvc at 3.7?
Because of the higher draw on the battery, the factory just feels it safer to set the LVC at a higher threshold.
Ultimately to prevent the battery from getting too low, And then you charger wont be happy with it, and throw errors
I just bought my first rc car 2 weeks ago battery don't last long what would you recommend 4S batteries
hey bro like your channel.🤙
your way of explaining things so that people understand it is right.
Thank you for the advice you give us.
I just have a question for you, where do you find the strong springs you have on your shock absorbers.😊
Oh Hey, Thanks for the complement. Great question... you can get more detials from this video
ruclips.net/video/4GWt4zsRlF8/видео.htmlsi=1IkN4Lgz1HTCrdBH
here is a direct link to the springs. But Watch the vid to get the detial on them.
www.mwcomponents.com/shop/1631cs
Thanks for watching my channel
ill get this info in the description of this vid too.
@@EastTactics Thanks, I'll do that, I'll sit down now and watch the video so I get all the details about them.
good evening or day.
I don't know where you are in the world.
and what time it is for you
I come from little Denmark and here it is evening at 22:07
@spaceman3115
I’m in the US. Right now it is 2:13 PM. 👍👍
@@EastTactics ok usa, nice 🤙
You are a night owl I think who likes to stay up at night making your rc cars and your video. 😂
the same here I also set and repair my cars at night. 😀
so they are ready for me to drive with the next day
@@EastTactics What thickness of differential oil did you use in your shock absorber
Can barely hear you man
Hey, sorry about that brother, I actually do plan on picking up the nice DjI Mics for the new year. That will help a lot.