I have a 2005 C6 LS2 w/ BTR stg3, trick flow heads, full kooks, fast 102 manifold, 102 nick williams throttle body, & E85 tune.. I know the ECU in the 05 is different from what they went to in 06 so I am wondering about your start up and if your engine will spudder out at off gas low speeds??
Thanks for posting, I'm excited to install a cam in my car. it is currently at shop getting new harmonic balancer put on ATI, have Corsa CAI on its way along with some blisten shocks. I was on the fence as to what stage cam I would go with and that BTR 3 sounds amazing.
Hello. What is the exact name of your Stage 3 cam? For Ls2? Did you only change the cam and springs? Or something else? Rods, pushers, oil pump and all that stock?
It’s the BTR stage 3 LS N/A cam! While I was there I changed lifters, oil pump, harmonic balancer, springs, pushrods, , timing chain and gear. Pretty much anything that came off I replaced with new while your there I did It! I would suggest at least new oil pump
Oh sweet man! How you like it? I have around $1,500 or so in parts but I also replaced everything that got touched so you could probably do it all for around $800-$1,000
@@Bama_Mopar i love it but i do have a problem with my driveline support tube which is causing an annoying noise and i cant fix it bc they don’t produce that part anymore.
@@yoboii2993 oh yeah my buddy had the same thing going on with his years ago! Not sure what all he did. So I got the BTR stage 3 n/a cam kit with valve springs and pushrods, new oem oil pump, new timing chain and cam gear, ls7 lifters and trays (I bought Delphi lifters which I DO NOT suggest, get a better set spend the extra money if you do lifters), BTR trunnion upgrade, 1 7/8 speed engineering headers and mid pipe, vararam intake, and I believe that’s it if I think of anything else I’ll let you know! My car made 463hp and 460tq to the wheels
That sounds glorious!
chop chop chop chop chop 🔥🔥🔥
Yessir!! Chopping
Respect to you brother 👏🏽 Tuscaloosa here brother 🤙🏽
Thanks bro! You just right down the road 🤙🏼
Keep up the great work and content!!!! Then we'll get our roast on soon!!!!
I have a 2005 C6 LS2 w/ BTR stg3, trick flow heads, full kooks, fast 102 manifold, 102 nick williams throttle body, & E85 tune.. I know the ECU in the 05 is different from what they went to in 06 so I am wondering about your start up and if your engine will spudder out at off gas low speeds??
How is it on gas how many miles you get to a gallon
sounds amazing, did you have a shop put the cam in or did you do it yourself?
Thanks man! I did the cam myself
What tire size you running for front and back. I’m running the same wheels on my 2008 z51 c6
Thanks for posting, I'm excited to install a cam in my car. it is currently at shop getting new harmonic balancer put on ATI, have Corsa CAI on its way along with some blisten shocks. I was on the fence as to what stage cam I would go with and that BTR 3 sounds amazing.
Hello. What is the exact name of your Stage 3 cam? For Ls2? Did you only change the cam and springs? Or something else? Rods, pushers, oil pump and all that stock?
It’s the BTR stage 3 LS N/A cam! While I was there I changed lifters, oil pump, harmonic balancer, springs, pushrods, , timing chain and gear. Pretty much anything that came off I replaced with new while your there I did It! I would suggest at least new oil pump
definitely wanna upgrade your rocker arms, push rods, springs, lifters, harmonic, and oil pump 👏
Why do balancers require replacement?
What rpm is the idle?
did you change out the harmonic balancer? If so which one?
Yeah man I changed it out! I went with a Dorman balancer
Loose any low end power?
badass
Thanks man!
how much did all the upgrades cost? if you don't know just ballpark
I would say it was around $1,500 to 2,000 with tune
What's your idle set at?
What temp does tour trans run on?
Wtf
@@littledeel wtf what foo
Are the wheels z06 ? Or stock ?
They are z06 reps
hows the stage 3 clutch on it i have a gto with a stage 3 and its rough but got used to it overtime. wanting to sell it soon for a vette.
how much did this cam setup cost in total
i have an 05 z51 vette
Oh sweet man! How you like it? I have around $1,500 or so in parts but I also replaced everything that got touched so you could probably do it all for around $800-$1,000
@@Bama_Mopar i love it but i do have a problem with my driveline support tube which is causing an annoying noise and i cant fix it bc they don’t produce that part anymore.
@@Bama_Mopar also what are the exact parts for your setup if you know them
@@yoboii2993 oh yeah my buddy had the same thing going on with his years ago! Not sure what all he did. So I got the BTR stage 3 n/a cam kit with valve springs and pushrods, new oem oil pump, new timing chain and cam gear, ls7 lifters and trays (I bought Delphi lifters which I DO NOT suggest, get a better set spend the extra money if you do lifters), BTR trunnion upgrade, 1 7/8 speed engineering headers and mid pipe, vararam intake, and I believe that’s it if I think of anything else I’ll let you know! My car made 463hp and 460tq to the wheels
Dont be racing like u got money to rebuild that engine
If something happens to it I’ll build an engine for it
Should be reliable honestly
@@johnpresha829 yeah I have buddies putting crazy boost to these ls2 engines and rip the every day lol so a camshaft isn’t doing anything crazy lol
What spoiler is that on your vette?
Man I’m not really sure just sold the spoiler. Closest thing is I could find to it was on California super coupes website