You builded a fancy storage for the printeroutput. Looks great! I still use the lazy option - just one diamond bamboo chest with 2 dia stack upgrades. I'm still not shure how I will process the raw metal blocks ... Occultism maybe ... it depends on how much iron I will need and how much has accumulated until then. Some tips - nothing special, but things I think are realy helpful: The depot and the smelter: Use barrels/chests and Create brass funnels and an item drain, because you cant put two funnels above the depot. From left to right - A to D: A - the depositing side; barrel/chest with a brass funnel set to "up to any" B - an item drain C - the depot D - barrel/chest on the pick up side with a brass funnel - insert an attribute filter - "only ingots" - it is possible to have multiple categories / items on one filter. Or use the simple filter and put every thing you want in. Shovel all raw ores (NO blocks of raw ores - they disapear!) into the input barrel/chest - no "baby-sitting". This gives you the option to set up input and output barrels/chests near your crafting place and remote access your smelter / washer. (Or transfer direct with your AE2 System) For the ones who like to have a little puzzel: Lava and water can be exchanged with 2 dispensers and some redstone - there are mulitile possibilities in this pack. You can also use soulsand or soulfire / campfire and a flint and steal for the other bulk processing options and change them. There is a fluid filter from Thermal you can put into the blast chiller augment slots - then you get a little filter icon on top of the machine window - click on it to open the filter. You can choose black- or whitelist filter and just put a bucket of the fluid in. Cyclic has got wireless itemtransfer - functions analog to the wireless energie transfer you showed in one of the early episodes of this series. I use this to get the dyeblocks into the crafter that produces the RGB-blocks.
All great suggestions! I have my system set up to smelt the raw ores on demand right now but setting up a thing to have them pre-smelted is a good idea! Occultism will get 6* the raw but takes time to set up and takes time to process the raws so I may not even do it... I always push the "increase the material manufacture" over "3x your ores!" mentality 😉
If i'm not mistaken, you can also rename the pattern provider, and it shows too its name on the system. There is a press on AE2 that let you rename itens withou xp too.
There's a name plate from AE that is used for something like this I think 🤔 it doesn't bother me too much though so I wont go to the effort unless I get the urge lol 🤣
Ah but depots can only have 64 items on them at a time so if I want to make 1000 sand for example it would take longer than if i just threw the sand on the ground 😉
With your double drawers and the pebbles. You need to prime the other drawer section with what it compresses into. You also need to enable it to compress if it’s not reversible in the barrels UI. once done any pebbles will turn into their block form.
With the wrench u can point the pattern providers to one point and then the name will change in the pattern access terminal to the one that is pointed to. Else u have the chance that it sees 2 machines or barrels or some thing like u experienced. Lucky the other machine has the side closed, else it would accept items and it would go wrong. But if u point it with the wrench, it never will go wrong. But u can also use it to feed 4 the same machines at the same time to make the crafting go faster. But personally i mostly point the pattern providers to not get confused in the access terminal. When u look to ur crafters and dense cable, between the dense cable and crafter is just a normal connection from a normal cable. U cant use dense cable to connect some thing, it will always use the connection of a normal cable. In this pack a normal cable has 16 channels, so u can connect 16 crafters on 1 cable, doesn't matter if u use dense cable. So u cant have 17 crafter on 1 cable. Oh some longer but nice outro
I didnt mean to do that outro lol! It's being fixed as we speak haha! 😁 As for the pattern providers, im pretty sure im not using more than 8 crafters on each cable... I've staring at my dense cables going into my AE cube and they all seem ok! 🤔
If you want to move sophisticated storage containers without dropping all their items you can use packing tape from sophisticated storage and it'll keep the contents of the container when you place it back down
I don't know if it's useful currently but I was watching The Dark Lord and he mentioned EnderIO conduits have a 'self supply' mode/setting. You can use a single item conduit, attached to nothing on one end, and it will pull a item out of a machine and put it back in again eternally (you can use a filter too). It's really useful for any replication recipes in a modpack. Life changing TBH!
In your washing/haunting station, couldn't you put a dispenser with a button on either side of the soul sand (one with a bucket, the other with flint and steel) for quick changing the method you use?
If you need to speed up a RFtools Crafter you can (or should be able to) put the same recipe in it multiple times. Of course you can use dimensional shards too to infuse it (speeds up and lower energy use). Putting multiples of the same recipe is a free way to speed things though.
Right now it's waaaay quicker than the printer. I could add more printers but it's all good the way it is right now. Good plan though if I back up on fluid/dyeblocks 😁
The crafter can only execute one recipe at a time. To speed it up there is a little snake icon below the output area showing that it is on slow mode - click on it and change it to fast mode.
Thanks for the middle mot button tips in the pattern ae2 menu! Was really frustrated about that earlier!
I got told it a while back while playing ATM8 multiplayer! Handy thing to know! I use it all the time now 😁
You builded a fancy storage for the printeroutput. Looks great! I still use the lazy option - just one diamond bamboo chest with 2 dia stack upgrades. I'm still not shure how I will process the raw metal blocks ... Occultism maybe ... it depends on how much iron I will need and how much has accumulated until then.
Some tips - nothing special, but things I think are realy helpful:
The depot and the smelter:
Use barrels/chests and Create brass funnels and an item drain, because you cant put two funnels above the depot. From left to right - A to D:
A - the depositing side; barrel/chest with a brass funnel set to "up to any"
B - an item drain
C - the depot
D - barrel/chest on the pick up side with a brass funnel - insert an attribute filter - "only ingots" - it is possible to have multiple categories / items on one filter. Or use the simple filter and put every thing you want in.
Shovel all raw ores (NO blocks of raw ores - they disapear!) into the input barrel/chest - no "baby-sitting".
This gives you the option to set up input and output barrels/chests near your crafting place and remote access your smelter / washer. (Or transfer direct with your AE2 System)
For the ones who like to have a little puzzel: Lava and water can be exchanged with 2 dispensers and some redstone - there are mulitile possibilities in this pack. You can also use soulsand or soulfire / campfire and a flint and steal for the other bulk processing options and change them.
There is a fluid filter from Thermal you can put into the blast chiller augment slots - then you get a little filter icon on top of the machine window - click on it to open the filter. You can choose black- or whitelist filter and just put a bucket of the fluid in.
Cyclic has got wireless itemtransfer - functions analog to the wireless energie transfer you showed in one of the early episodes of this series. I use this to get the dyeblocks into the crafter that produces the RGB-blocks.
All great suggestions! I have my system set up to smelt the raw ores on demand right now but setting up a thing to have them pre-smelted is a good idea! Occultism will get 6* the raw but takes time to set up and takes time to process the raws so I may not even do it... I always push the "increase the material manufacture" over "3x your ores!" mentality 😉
If it bothers you, you can rename a chest using an anvil, and hopefully AE will show the chests name in the pattern access terminal
If i'm not mistaken, you can also rename the pattern provider, and it shows too its name on the system. There is a press on AE2 that let you rename itens withou xp too.
Wow I had no clue that was a thing.... that's so cool!!
There's a name plate from AE that is used for something like this I think 🤔 it doesn't bother me too much though so I wont go to the effort unless I get the urge lol 🤣
You can just use the quartz knife on the pattern provider to rename it
You can use multiple depot from create, it works in line! If the fan blow longer, the longer you can put the depots
Ah but depots can only have 64 items on them at a time so if I want to make 1000 sand for example it would take longer than if i just threw the sand on the ground 😉
With your double drawers and the pebbles. You need to prime the other drawer section with what it compresses into. You also need to enable it to compress if it’s not reversible in the barrels UI. once done any pebbles will turn into their block form.
Ahhhh amazing! I will go do this asap! Thanks for the suggestion 😁
With the wrench u can point the pattern providers to one point and then the name will change in the pattern access terminal to the one that is pointed to. Else u have the chance that it sees 2 machines or barrels or some thing like u experienced. Lucky the other machine has the side closed, else it would accept items and it would go wrong. But if u point it with the wrench, it never will go wrong. But u can also use it to feed 4 the same machines at the same time to make the crafting go faster. But personally i mostly point the pattern providers to not get confused in the access terminal.
When u look to ur crafters and dense cable, between the dense cable and crafter is just a normal connection from a normal cable. U cant use dense cable to connect some thing, it will always use the connection of a normal cable. In this pack a normal cable has 16 channels, so u can connect 16 crafters on 1 cable, doesn't matter if u use dense cable. So u cant have 17 crafter on 1 cable.
Oh some longer but nice outro
I didnt mean to do that outro lol! It's being fixed as we speak haha! 😁
As for the pattern providers, im pretty sure im not using more than 8 crafters on each cable... I've staring at my dense cables going into my AE cube and they all seem ok! 🤔
@@Pilpoh I mean the proccessors and co-proccessors, CPU for crafting
If you want to move sophisticated storage containers without dropping all their items you can use packing tape from sophisticated storage and it'll keep the contents of the container when you place it back down
I've used it before and it is awesome! It's like a temporary shulker box! 😁
I don't know if it's useful currently but I was watching The Dark Lord and he mentioned EnderIO conduits have a 'self supply' mode/setting. You can use a single item conduit, attached to nothing on one end, and it will pull a item out of a machine and put it back in again eternally (you can use a filter too). It's really useful for any replication recipes in a modpack. Life changing TBH!
I've not watched the Lash man in ages! I should take a look! 😁
istg, i have attuned my timing to our uploads, yippie
Awesome 😁
In your washing/haunting station, couldn't you put a dispenser with a button on either side of the soul sand (one with a bucket, the other with flint and steel) for quick changing the method you use?
I don't really use it often enough to have it automated but If I run out of stuff to do I'll seriously consider automating it some how 😁
last 2 minutes of outro is fun
Thanks for letting me know lol! I did that by accident haha! 😁
If you need to speed up a RFtools Crafter you can (or should be able to) put the same recipe in it multiple times. Of course you can use dimensional shards too to infuse it (speeds up and lower energy use). Putting multiples of the same recipe is a free way to speed things though.
Right now it's waaaay quicker than the printer. I could add more printers but it's all good the way it is right now. Good plan though if I back up on fluid/dyeblocks 😁
The crafter can only execute one recipe at a time. To speed it up there is a little snake icon below the output area showing that it is on slow mode - click on it and change it to fast mode.
@gundleyG Maybe it's pack specific because in MeatballCraft it specifically tells you to repeat the crafts to speed it up.
I could add more crafters if needed, the one on the left isn't really doing anything, I just did that one for symmetry 😂
Can’t wait for a power episodr
I mean... does bulk making the stuff i already have count? 🤣
First! Happy Monday! 👍
New week and RUclips didn't block you this time 😂🥇
The infinity charger holds 1trillion power. It does need 1 annoying block to craft it tho
Dissolution chamber is pretty easy to automate with AE2, I will get to that at some point 😁
Just to let you know I added a improvement to your setup on discord
Just seen it! If I didnt already set up my dye set up, i would 100% "borrow" your build 🤣
Jk Jk you all know I always give credit 😁