Hi! Great job so far! I'm at video Part 3 now, but I missed how you connected all the additional wires. I'm going to do this on my Passat B7, I imagine the process is very similar. My question is, did you connect all the lights to the same Pin #72 in the BCM connector? Thanks!
Hej, w moim aucie a6 c7 lift. Mam oświetlenie LED na nogi. Nie mam oświetlenie ambient ( chcę dołożyć w przyszłości ) Ale ona wyłącza się wraz z oświetleniem wnętrza. A chciał bym aby one świeciły cały czas a najlepiej sterować przez MMI 3g Plus, czyli jak tutaj natężanie światła. Mam OBD eleven, pewnie da się to włączyć jakoś przez OBD ?
@@mrfixpl Hey i have seen a lot of your videos on RUclips, you are really talented to customs mods on cars, I hope you see my message, I have a golf 7 GTE 2015, my cars footwell light dims a little bit when the door is closed, and when the door is opened the light gets get brighter, I have OBDeleven. Do you know if it’s possible to disable the dimming function, so the footwell lights stays at 100% all the time, so it doesn’t dims when the car door is closed and am driving in the car
hello ... but all those items for encoding, I do not have another denomination year? me or the vcds 19.2 el 20.4..I send you a fuck of what comes out from the drop down menu pet the coding of internal lights! thank you
Good instructions and videos you have, I also want to install the back footwell lights make part 3 please :)
Hi! Great job so far! I'm at video Part 3 now, but I missed how you connected all the additional wires. I'm going to do this on my Passat B7, I imagine the process is very similar.
My question is, did you connect all the lights to the same Pin #72 in the BCM connector? Thanks!
It’s a single wiring harness. One pin drives all 4 lights.
@@mrfixpl Thank you very much! :)
hello, how did you remove tha internal side pannels of the dashboard to transfer the cables to the right side?
a kiedy kamerę cofania będziesz dodawał?? mnie to interesuje bo w skodzie superm mk3 chciałem to zrobić..
Kamęrę będziesz dokładał low czy high?
Chciałbym HIGH, taniej LOW, czasu nie mam ba którąkolwiek 😀
@@mrfixpl no tak.. mimo wszystko super robota. Fajne masz oba kanaly;)
@@-xYz--nk1gm Dzięki za miłe słowa!
English?
Hej, w moim aucie a6 c7 lift. Mam oświetlenie LED na nogi. Nie mam oświetlenie ambient ( chcę dołożyć w przyszłości ) Ale ona wyłącza się wraz z oświetleniem wnętrza. A chciał bym aby one świeciły cały czas a najlepiej sterować przez MMI 3g Plus, czyli jak tutaj natężanie światła. Mam OBD eleven, pewnie da się to włączyć jakoś przez OBD ?
Hy , one question , if I dont conect the rear 2 light will i get an bulb out error on the instrument cluster?
No, you will not have an error message.
Hello how do you coded roof ambient light in infotainment and other
Nice color man. I got red LED's all through my Scirocco
I'm all about white LEDs personally. 👍
So the car doesn't have passenger side footwell light from factory? Only on the driver side?
There were no footwell lights. This video is part 2 of the tutorial. Part 1 covered the drivers side.
@@mrfixpl Hey i have seen a lot of your videos on RUclips, you are really talented to customs mods on cars, I hope you see my message, I have a golf 7 GTE 2015, my cars footwell light dims a little bit when the door is closed, and when the door is opened the light gets get brighter, I have OBDeleven. Do you know if it’s possible to disable the dimming function, so the footwell lights stays at 100% all the time, so it doesn’t dims when the car door is closed and am driving in the car
Hi,thanks For your video,is very best…
Becouse you not show info coding ??
Check part 3: ruclips.net/video/wTi_KTtBlKE/видео.html
super dzieki
👍
hello ... but all those items for encoding, I do not have another denomination year? me or the vcds 19.2 el 20.4..I send you a fuck of what comes out from the drop down menu pet the coding of internal lights!
thank you