I have the Torsion 3.0 holster for my G23 and P365 I have no complaints, the small portion of the sweat guard has not bothered me and I live in Phoenix AZ. I also have the original torsion currently on my G43 and P320 and can definitely tell the material is different. The 3.0 does look sleeker and feels lighter. I noticed the belt clips also feel a bit softer but has not compromised anything. I run all the holsters with one clip at the 3 and 4 o cock positions. The holsters will rub on one side of the slide leaving a residue from the holster it does wipe off and is noticeable. It hasn’t rubbed the finish off the guns though. Overall I like them have continued to buy them over the past 5 years. They also have good owb holsters which I use for hunting/camping/ATV. Again you have to dress around your firearm. IWB carry is meant to be comforting not comfortable although bravos holsters are comfortable to a degree. I’m 6’2 260lbs and carry daily.
My Bravo Concealment OWB 3.0 for my Glock 26 Gen 5 arrived today. I bought the pancake belt holders . Absolutely love the holster with stock or pancake belt holders. Great retention and comfortable.
I have a bravo torsion version 1 they are great but if they can incorporate a body contour or wedge that would even push the grip into to your body that is also comfortable then i would get it and definitely would be hard to beat by other holster manufacturer
Wish it fit the Shield Plus as well. Bit of a gap by the mag release, doesn't sit fully flush. With some pressure the mag release is hit, dropping the mag.
Just got mine. I agree with you about the sweat guard but overall attached with the mag carry, pretty nice. Especially for the price, pretty nice for a full appendix rig. Thx for the video!
I also just realized, I attached the mag holster to make it a full appendix rig but it’s super uncomfortable on my inner thighs because of how flat and wide (when the mag carrier is attached) they are at the bottom. If you bend even slightly both sides will dig into you and the hard plastic is quite painful.
Great video. I have Bravo IWB and OWB holsters for my M&P 2.0 4” compact and now looking at purchasing a Shield 2.0. I will definitely stick with Bravo 3.0 holsters for this gun.
Mark Layne hey please respond I was looking at getting a holster for my M2.0 as well but they don’t sell a 3.0 one for it how’s the retention on the 2.0 since it don’t have adjustable worth buying or should I wait ?
I know this is year ago but I was looking to get a holster for the new Shield 9 plus with 4" barrel but you Bravo Consealment doesn't make one for that gun so if any reads this from this company please make one cause I really really love your holsters. 🤘
No just his preference, if a they fit run it all the way to the edge of the slide, it would probably be an issue, it’s where it needs to be. If the sweat guard is any higher, it starts to get caught up in the shirt. My experience, I wear an undershirt always.
so i bought one off amazon for my p365, i liked everything about it but there was no audible click when holstering it. and it seemed it rubbed or had tension on the slide not the trigger guard? maybe i got a bad one? everytime i drew my gun it had part of the holster material on the slide like a white powder. im not big on my slide being rubbed like it was.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
I have the Torsion 3.0 holster for my G23 and P365 I have no complaints, the small portion of the sweat guard has not bothered me and I live in Phoenix AZ. I also have the original torsion currently on my G43 and P320 and can definitely tell the material is different. The 3.0 does look sleeker and feels lighter. I noticed the belt clips also feel a bit softer but has not compromised anything. I run all the holsters with one clip at the 3 and 4 o cock positions. The holsters will rub on one side of the slide leaving a residue from the holster it does wipe off and is noticeable. It hasn’t rubbed the finish off the guns though. Overall I like them have continued to buy them over the past 5 years. They also have good owb holsters which I use for hunting/camping/ATV. Again you have to dress around your firearm. IWB carry is meant to be comforting not comfortable although bravos holsters are comfortable to a degree. I’m 6’2 260lbs and carry daily.
My Bravo Concealment OWB 3.0 for my Glock 26 Gen 5 arrived today. I bought the pancake belt holders . Absolutely love the holster with stock or pancake belt holders. Great retention and comfortable.
That is a really good price!! Definitely got it fixed up nice!!
I have a bravo torsion version 1 they are great but if they can incorporate a body contour or wedge that would even push the grip into to your body that is also comfortable then i would get it and definitely would be hard to beat by other holster manufacturer
Wish it fit the Shield Plus as well. Bit of a gap by the mag release, doesn't sit fully flush. With some pressure the mag release is hit, dropping the mag.
I just got mine and it is comfortable. I wish I had gotten a free mag carrier with mine
I want to try one, I would probably dremmel sweat guard off. I use Tier 1 now but would be great to have some cheaper holsters.
Nothing is perfect for everyone!! I love mine.
Nice Rig! I really need a new holster for my Shield, gonna check it out.
What’s the other one that you showed that’s $120
- it’s a Vedder LightTuck. They start off around $70 but are customizable so they can get pretty pricey
Good rig and set up....Good stuff...
Wish they would make something for the CZ P07! I'd give them a try if they did.
Only good companies listen to there customers and actually do it.
Just got mine. I agree with you about the sweat guard but overall attached with the mag carry, pretty nice. Especially for the price, pretty nice for a full appendix rig. Thx for the video!
I also just realized, I attached the mag holster to make it a full appendix rig but it’s super uncomfortable on my inner thighs because of how flat and wide (when the mag carrier is attached) they are at the bottom. If you bend even slightly both sides will dig into you and the hard plastic is quite painful.
Due to the flatness on the bottom and the lack of any sort of curve.
- I’ve never tried their mag carriers. I have one from Tulster and have tried them from Safariland. I’d like to try one of the Neomags
@@Steve-Goff did you end up trying the neomag?
Thank you
Just bought a bravo holster for my mp shield 9 as well. There buy 1 get one deal. Should be shipping soon, been about 13 days now.
Just came across the same deal but unfortunately the OWB is still 2.0 but IWB is 3.0 ... any thoughts on the deal you got? Did you like both?
Love this holster company! Wonder if they could do a fat guy style holster with the higher belt clip and deeper pocket?
Just bought a MP Shield 9MM 2.0, with the factory installed laser. Looking for a holster that will fit this.
So it's cool that the holster is curved to bring it in closer, but does the muzzle flash your body at all when holstered?
- I appendix carry so the muzzle is always pointing at something. The curvature is slight on this holster
Major improvements.I just wish them made them for the 10mm Glocks.
- it’s all about demand and unfortunately there just isn’t enough for them to justify it
I'm looking for a aiwb holster I have a full size S&W m&p 9 you think this will be good?
Do you have an owb concealed video?
- yes. Several. Tulster, Vedder, and Bravo Concealment
Great video. I have Bravo IWB and OWB holsters for my M&P 2.0 4” compact and now looking at purchasing a Shield 2.0. I will definitely stick with Bravo 3.0 holsters for this gun.
Mark Layne hey please respond I was looking at getting a holster for my M2.0 as well but they don’t sell a 3.0 one for it how’s the retention on the 2.0 since it don’t have adjustable worth buying or should I wait ?
Can you add a claw to it?
- I’m not sure because of it already having 2 clips
I know this is year ago but I was looking to get a holster for the new Shield 9 plus with 4" barrel but you Bravo Consealment doesn't make one for that gun so if any reads this from this company please make one cause I really really love your holsters. 🤘
- check out Tulster. They’re a little more expensive than Bravo but have a nice selection
Please make IWB holster for Sig XL.
- I have a video for the Tulster Profile and another video for the Tulster OATH. The XL will work just fine in either of those
Does it make it uncomfortable to carry because that one region you keep mentioning is not covered? Newbie. I don’t understand why this is an issue.
No just his preference, if a they fit run it all the way to the edge of the slide, it would probably be an issue, it’s where it needs to be. If the sweat guard is any higher, it starts to get caught up in the shirt. My experience, I wear an undershirt always.
bowl816 nice thanks
Doesn't bother me at all. I have a slight belly and I don't even think it actually touches the gun, lol!
@Bravo Concealment ... if a 4.0 comes out, will it finally accommodate a flush/ height matching sweat guard??
- I’ve been saying it since Gen 1
Ohio Guns & Deals ... I hope they listen!
so i bought one off amazon for my p365, i liked everything about it but there was no audible click when holstering it. and it seemed it rubbed or had tension on the slide not the trigger guard? maybe i got a bad one? everytime i drew my gun it had part of the holster material on the slide like a white powder. im not big on my slide being rubbed like it was.
- something definitely doesn’t sound right with that. I wouldn’t want that happening to my slide either
that happens to mine also with my m&p 9 shield, glad I'm not alone, i am gonna contact them, definitely not good.
Wow no full coverage on the trigger guard. That would have went back in a heartbeat. Poor attention to detail. TFS
New drinking game everybody drinks when he says... Umm