how to turn Compressor into 2 stroke Engine
HTML-код
- Опубликовано: 4 окт 2024
- how to turn Compressor into 2 stroke Engine
I have successfully researched and made a 2-stroke engine from an old refrigerator compressor, which is great, you can see more at;
• i turned the water pum... - Хобби
Where are you from
China
Mauritius island 🇲🇺
🇻🇳
@@congthanh8 p
@@congthanh8 p
No smoke, no compression, no electronics, intake and exhaust together? False!! There are real videos of homemade 2t engines that really work with the merit of their creators !! You fool people.
Really
FAKE FAKE FAKE FAKE, THIS VIDEO IS FAKE
Fake
Yes. Definitly. And 6 ignition impulses per rotate? This is joke.
Totalmente mi querido amigo, que ganas de engañar a la gente... Esto es definitivamente falso. No digo que sea imposible no difícil de hacer, solo que este en específico está construido de tal manera que es imposible que funcione. Tal como dijeron varios, relación de compresión absurda, al ser dos tiempos necesitaría utilizar el Carter para precomprimir la mezcla y forzarla a entrar en la cámara de combustión mediante los transfers o un compresor, además el pistón no tapa las lumbreras de admisión y escape por lo que nunca se generaría compresión. No tiene sentido hacer un vídeo así, que bronca.
Ага ага ага !! Мотор с такой катушкой зажигания с сечением провода 0.50 а и то 0.75 квадрата, с камерой сгорания больше чем сам двигатель и с штрабой в бетоне идущая за мотор наверняка с спрятанным проводом к электродвигателю которая вращает этот чудо мотор я уже молчу про звук электродвигателя. Качественный ФЭЙК !!! Молодец, браво, аплодисменты !!!
Он поди спецально с только магнитов нахуячил
Просто у тебя руки из зада))). Вон чувак таких два на Тойоту себе поставил!!!)))
No smoke at all. That coil wouldn't fire that spark plug. The compression ratio using that square section would be minuscule and not enough to fire.
FAKE FAKE FAKE FAKE, THIS VIDEO IS FAKE
A mí también no me convence. Allí no hay compresión y esa bobina con alambre de cobre tan grueso y con tan pocas vueltas no dispara chispa en esa bujía. Si tal vez utilizará un módulo CDI o algo parecido quizá me convenciera más. Pero no soy un ingeniero. Quizás a lo mejor si funciona realmente y somos nosotros los que estamos equivocados... De cualquier manera me parece un vídeo excelente y entretenido.. felicidades
@Barnabás Fehér oh and there are no valves, and how does the charge get into the cylinder and not go out the exhaust pipe... there is just soooooo much wrong here.
@@colinsmith6340 2 strokes don't need valves. Ferrari made the only 2 stroke with an exhaust valve.
@@bettafish541 Yes they do. The piston itself is one valve with a port in the side, there are also 2 stroke reeds. In this shitty fake, when the piston goes up, what stops the compression pushing air back out the carby? or just straight out the exhaust?
This is an intelligent illusion for those who cannot see the details!!
There is no valve on the carburetor side so any little suction when the exhaust valve shuts will be compressed back into the carburetor and into the exhaust, so there is no compression whatsoever.
Basic logic demands that you cannot have one chamber for a two-stroke engine. You need two chambers, one to memorize the charge that is to be transferred to the compression chamber where the piston itself would act as a valve through transfer ports.
The ignition coil shows that the person who mounted it has no idea of what is meant by the RATE OF CHANGE OF MAGNETIC
FLUX. With the E lamination placed near the rotor as shown, the magnetic flux would go through the limbs in the same direction and so there is no rate of change of magnetic flux through the coil. For a voltage to be induced in that coil there must be a rate of change of magnetic flux and this can be done only if the E laminations are set at 90 degrees and the rotating rotor must form part of the magnetic path. As shown it does nothing of the sort! The number of turns is not enough to get the voltage hence the spark for the plug. 80 years ago I used to wind iron laminated transformers according to the rule of thumb 7 or 8 or 9 turns per volt per square inch of iron area. and estimating the area of those laminations I wager that at least about10,000 turns are required on that coil......................with the changing gap being in the correct direction to provide the RATE OF CHANGE OF MAGNETIC FLUX.
That carburetter needs one fuel pipe from the tank and one pulsating pipe from the engine to operate the pumping action.... this installation provides nothing of what is required.
A very amusing illusion indeed, to be congratulated as being very entertaining with false ingenuity.
Some things look suspicious. Timing? No exhaust fumes?...etc Effort appreciated non-the-less.
I dont think it is really running 2 stroke..it has no fumes and doesnt sounds like 2 stroke engine...yes it is running but it is driven by a electric motor
Also there’s no timing for the spark???????
Exacto!! Fake video! Perdida de tiempo y un insulto para sus seguidores. Pero hay muchos videos de estos motores andando y bastante buenos.
@@bencapobianco2045 And, of course, that coil setup could never deliver the thousands of volts needed to generate a usable spark...
Uhmm sit down and shush. This could work. The spark would be eratic but it theoretically could work. IF it were perportional.
Yup electric motor
Доктор Дью, срочно на выезд! Больной бьётся в конвульсиях идиотизма, ещё не много и он съест собственную голову.
I don’t know enough about engines to replicate this, but was fascinating to watch. Wonderful job! Thank you. You need to make your own gaskets! Very satisfying to watch.
No need to replicate, it's fake. It would make no compression because the combustion chamber is enormous, it's the whole 'box thing' and also there is no valves. I think this guy has no clue about engines, put a lot of effort to make one and it didn't work, then tried to save the video anyways by pretending that the engine works.
@@SinsBird 😄😄
@@restorerestoration4705 Fooled me the first time I watched this video to be honest, because I wasn't paying too much attention.
@@SinsBird
Are Einstein bro.😅😍
You are so genuis love it bro.
From mauritius 🇲🇺
Фейк,последние кадры, не показывает двигатель с разных сторон, нет выхлопного дыма, этот движок крутит электомоторчик. Но за рукастость, палец вверх!!!
Он, видать, его на спирту и без масла запустил, если, из-за корявой электрики, он вообще завёлся.
@@motors2567 в конце присмотрись он спрятал провод в бетоне и плохо замаскировал)))
I hadn't think by at the moment. This machine is working!! You is mighty man💪
С такой огромной камерой сгорания ничего работать так не будет 😂зажигание тоже фэйк, магнитов столько налепил за один оборот сколько там этой искры бы было если бы это работало
Я СЕБЕ НА ТОЙОТУ ПОСТАВИЛ ДВА ТАКИХ, ТЕПЕРЬ РАЗ В ГОД НА ЗАПРАВКУ ЗАЕЗЖАЮ.
НАВЕРНОЕ ПРОСТО НЮХАЕТ БЕНЗИН 😂😂😂🤣🤣🤣
Very good idea. Congratulation from Hungary! ❤👍
Meu amigo, essa foi de gênio, belíssima ideia, ficou MUUUITO bom 👍
Abraço aqui do Brasil 🇧🇷
é falso o vídeo
@@GS12.3D pq?
@@JoaoBaudonete o comando de valvulas não funciona, o motor não tem compressão, o carburador do jeito que ele fez não funciona, tudo errado
@@JoaoBaudonete na verdade eu nem recomendo assistir esse canal, tudo que ele faz é por entretenimento, pq é tudo falso
Es un reinvento de lo que ya estaba inventado. Buen trabajo.
Wonderfull !!! Thanks !!! Happy Greetings from Bavaria !!!
How did you measured the time of the spark and the position of the piston?
Yeah I have same question, how he know piston , TDC, BDC for spark
@@GM-pr1fd I think it's fake
With the electric motor on the other side that’s making it look like it’s running perfectly with no smoke at all….. I smell bullshit!!!!!!
Yes....
Hey took a stab in the dark at the timing and got it exactly perfect first try! LOL.. This is total bullshit... bullshit bullshit bullshit.
your brain is so fantastic
А где компрессия? А как же выхлоп в карбюратор? Там клапана не было. такое чудо работать не будет.
Камера сгорания в разы больше рабочего объёма двигателя???
Hello friend, excellent invention, but I can ask you something, what use would you give that engine?
I can imagine something like this in a Bike frame, it's pretty small...
Maybe phone charger? 😂🤣🤣
Wow baru tahu ada cara yg lain. Ada rekomendasi lagi
Chào anh thân mến,phát minh hay quá,like
Для искры нужно 18 _20тыс.вольт а ты намотал 5-6вольт кароче галимый фейк
у него свеча накаливания-калильная.топливо спирт и касторка.
@@николайфедотов-з9х присмотрись, обычная.
И да, искры тут не будет, вольт 10 дай бог даст не более
Động cơ hoàn chỉnh mà tui thấy tỉ số nén bị mất đi 1 ít thôi đã khó nổ rồi còn cái này piston có 1 tí khoảng ở trên thì quá nhiều k biết làm sao mà nó đốt cháy hòa khí đc nhỉ😂
Thì nó chạy bằng pin con ó mà cần gì nguyên lý động học đâu 😂
Okay
thanks
Блин а картер где? Двухтактник подобный должен иметь картер, карбюратор помоему на такой мотор очень большой, в таком моторе 5 кубиков примерно объем цилиндра а карб на все 20-25 cc... на*б короче. Камера сгорания вообще ппц космического размера , про компрессию автор не слышал походу... и туда же и карбюратор вроде присобачили, как не бабахнуло с обратным хлопком да в таком объеме камеры сгорания - хз...
Этот движок фейк
@@МаксимТокарев-э1р однозначно фейк, я таких настроил за все время штук пять но рабочих и делается совсем не так как у него. ruclips.net/video/90IdGhZkL5k/видео.html
Камера сгорания и катушка ВВ полный мутняк, это в принципе работать не может.
Главное пол ляма людей посмотрело ету херню
с таким успехом можно было и принтере напечатать
Бред, слышу звук электродвигателя.
Đúng là thiên tài chế cháo vãi lồng đèn luôn ! Nó nổ đc xin tại hạ bái phục
You can make electricity from the rotation of the rotor but itself will not be able to create a spark in the plug. How the timing of spark is crated in the engine. This engine will not run.
Your right
Complexos mas muito interessante parabéns 👏🏾👏🏾👏🏾👏🏾🔝 pelo tutorial ficou show tmjts👍
Sin CDI🤔 y sin vovina de alta tencion🤔👎
Y sin compresión
This engine is as real as my girlfriend
Ok felicitari
Nice assembled 2 stroke mini engine super
Yes it is very good
this is a good idea, but it's not a very well-oiled clicker
لست أفهم لم لا يزال الزيت في الداخل صاف?!!
رغم انه يدور في نظام تزييت عبر انابيب واخاديد من الالمنيوم والحديد وقطع تحتك ببعضها البعض.. المفروض يتغير لون الزيت نحو اللون الأسود !
🤔
Hôm nào chế 2 xi lanh thử a ! Like
Very nice
Es no es posible, los parámetros de compresión no son viables para producir una combustión, no tiene un control de los siclos Admisión Escape, amenos que halla omitido algo en el video pero ese motor no funciona realmente, la presunta bobina no tiene la capacidad para producir la tención necesaria para un arco eléctrico capas de ser útil en el motor.
🤦♂️😒
Jaja, empezo bien. Cuando le puso el caño arriba del pms que compartian admision y escape al mismo tiempo... ni hablar de la bobina!! El primer video falso de un motor 2t que veo.
Sir a saman kaha milega uppar ka kala wala chij or karbetor a dono kaha milega please anser me.🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
I still don't know how the spark plug fires. Without any battery or CDS. And also there is no timing for spark plug. Big cylinder head block makes the combustion weaker. So that less power is received.
Good , how many turns wound and gauge of wire, where can I find that feel switch used there
FAKE FAKE FAKE FAKE, THIS VIDEO IS FAKE
rất hay đí bạn chúng ta chế như vậy là quá đỉnh rồi.
Mi pregunta, que hago yo con ese motircito tan chirrisqui y ruidoso, pienso y era mejor el anterior es eléctrico y silencioso, discúlpeme amigo no entendí cual fue su propósito.
why do you take a new spool if you already have one in front of it?
Whats the carburetor? I dont know that gaget?
Te servirá por 5 minutos después se amarra el rotor por qué esos motores están diseñados para estar en contacto con aceite todo el tiempo.
Claro solo por un tiempito podra estadr encendido
A lo que no son materiales preparados para altas temperaturas
por favor es un fake
Va a andar mucho tiempo porque es falso y lo impulsa un motor electrico!
Si fuera cierto lleva aceite y gasolina para lubrica por dentro pero por fuera sería hacerlo manual o ponerlo en una caja cómo va el compresor
Какова степень сжатия сего говна? Исистема смазки. Про бензонасос и зажигание молчу приэтомподача топлива не самотеком и из герметичного пузыря
como puede la bujia tirar chispa de esta manera si no ay una bobina de alta tensión....pregunta...
nice creation brother
Hụt hơi cả khúc mà vẫn chạy đc hả 🤔
Có thấy nó sai sai k ở thời điểm đánh lửa t
Hay khó hiểu luôn ạ 😅
Compression? Timing?
exactly this has to be fake
Нас снова пытаются нае.. Тут полтора Терра ЛЯХА
Камера сгорания это рас, зажигание это два и провода по краям деревянной основы внизу это три и плохо замаскированный провод в бетоне это четыре диз.. Кароче
Hola. Alguien más , aparte del señor del vídeo. Hizo este motor explosión ? Saludos
How this engine 's coil work
Qualquer um que entende como um motor funciona sabe que isso é fake..quando o pistão sobe o que impede essa compressão de ir embora pelo escape ou pelo carburador? a palheta do escape abre altomaticamente com a subida do pistão e na admissão nem sequer existe pelheta;não existe mistura nenhuma comprimida ai dentro e por mais que houvesse a compressão na tampa do cilindro não seria suficiente
Motor sound..... real fake🙄🙄🙄
Co bán không bạn bán mình cái mình thích quá
What is name of petrol connecter race slow and High speed Bata do
Jaldi bata do
Esse é um gênio
How much hp can this be
Parabéns boa invenção mano 👍🏼👍🏼💯💯🇧🇷
I'm amazed by your skills
this is a fake video the engine doesn't have a exhaust,smoke and no pressure check valve without the valve the engine wouldn't work
nevermind .. it's impossible to work
Em ko có cục biến áp như của anh em lấy mô bin của xe máy được ko anh
Miss respetos bravo,bravo
Good good
Everything was going well, until the minute 03:30 . I can't focus on that blue G string
Actually it's not working...
The sound is just the movement of the piston inside the cylinder
There is no any stoke is happend....
I think he just connected a dc motor in the opposite side of the view
Thấy nó sai sai có cục đồng thôi mà cũng đánh lửa đc hả bn
Very good thanks nice
chia sẽ cực hay thank bạn nhé
у него с одного компрессора нарезки на 5 "изобретений"))
Galing ah
Bịp người ko biết. Mạch đánh lửa chưa nói. Xem cái van xả lắp như thế là ko có kỳ nén nổ, ko sinh công được.
Có thể chế thành máy phát điện luôn thì quá ngon.kết hợp động cơ 2 thì và lỏi phát điện
This compression need enjain oil otherwise bush and shaft are damage
ดีมากๆครับที่คนเราออกมาคิดและกล้าทําในสิ่่งที่เราชอบครับ ดีกว่าเราไม่ทําอะไรเลย
Good my need one pic but where get
ủa rồi nén đâu mà nổ chỉ mình phát
Nhìn hư cấu vl luôn ấy.😂😂
Фейк. Как он регулировал момент зажигания? ruclips.net/video/Bk4RND5AbRc/видео.html Больше похоже на правду
Hadir bang🙌🙌🙌🙌
helllo
Excellent job 👌👌👌
Самое главное зачем!? 🤔
Al final del video se ve donde está enterrado el cable...por un lado de su pie...
Когда в 21 веке люди переходят с бензина на электро тут всё наоборот
Great work
А какоэ применениэ можна двигателю дать
A có zl kh ạ cho e xin hỏi với ạ e đang định làm như a v ạ
Good love 😘❤️ Fantastic
Meus parabéns intelegentissimo vc
can u make it to steam engine and produce electric power?
No coil?
What a load of BS! There are so many things wrong with this design, it could never function as a running motor.
The ignition system is laughable, would not generate enough voltage to produce a useful spark.
The carburettor is connected directly to the combustion chamber. Catastrophic!
The combustion chamber is enormous, compared to the swept volume...virtually zero compression.
There is no crankcase compression, and in any case the carby is elsewhere.