How To build an EASY cheap Work Bench
HTML-код
- Опубликовано: 10 июл 2024
- Easy Cheap work bench build with integrated table saw. In this video I show how to build a workbench with a table saw integrated into the bench. This is a great solution for a small work space as it serves as a practical outfeed table for a table saw as well as a great storage solution. The work benches main purpose is of course to serve as a great comfortable work surface for all your wood working projects.
The final dimensions of this particular bench are -
2440mm long x 1220mm wide and 920mm high (These dimensions are to suit my main purpose of building gates on here). This bench is probably far too big for most, but just make your bench to your specific requirements.
Material list -
10 x 3600mm x 96mm x 45mm (4 x 2") C16 Timber
1 full sheet of 12mm MDF (8 X 4ft)
1 full sheet of 18mm Hardboard Plywood
4 x 5" Castors - amzn.to/3qYD8Fq
Box of 6 x 80mm coach screws (for frame) - amzn.to/3FAOeo1
4.5 x 50 decking screws (for top) - amzn.to/3cxwvRR
Featured tools -
Dewalt Table saw - amzn.to/30NQEQQ
Makita mitre saw - amzn.to/3qXTNZB
Makita Track saw - amzn.to/30KWJ0q
Dewalt 54v circular saw - amzn.to/3lhTm91
Dewalt jig saw - amzn.to/3FscjgK
Dewalt drill - amzn.to/3nAhkOe
Dewalt impact driver - amzn.to/3x8xlOo
Milwaukee impact driver - amzn.to/3CDf6li
Ryobi ONE trim router - amzn.to/30HHIgA
Disclaimer - The Amazon link is an affiliate link and I may receive a very small commission if the item is purchased through the link, but it does not cost you anything. This helps support my channel and enables me to keep posting free content on a weekly basis.
LINKS To all the production equipment that I use -
MOVAVI Editing software that I use - store.movavi.com/order/produc...
RODE Smartlav+ AUDIO Lavalier Microphone for smartphone - amzn.to/3dSLN2h
RODE SC1 Microphone extension lead - amzn.to/366jrih
DJI OSMO 3 GIMBAL - amzn.to/3bAM4VX
JOBY GRIPTIGHT phone holder - amzn.to/2z6Hj9x
70" Camera tripod - amzn.to/2z35qpx
Epidemic sound music and sound effects - www.epidemicsound.com/referra...
Tubebuddy software for new youtubers - www.tubebuddy.com/BACREN73
TIMESTAMPS -
00:00 Intoduction
00:14 Making the legs
01:30 Making the top frame
01:50 Attaching the legs and bottom frame
02:33 Table saw measuring
04:03 Adding Cross supports / bracing
04:48 Adding Castors
05:26 Adding bottom shelf
06:26 Adding table saw shelf
10:30 Framing the sides of the saw
12:37 Fitting the bench tops
14:25 Final Overview and outro
You can Donate to the channel here if any of my videos helped you in any way, this would be highly appreciated and also help me grow the channel in future paypal link paypal.me/bacrenproperty?loca...
- Thank you !
Thanks for watching and if you enjoyed the content, please consider subscribing to my channel / @bacrenfencing
to see more similar content in the future. This would mean a lot to me and be greatly appreciated 😊
#workbenchbuild #howtobuildaworkbench #cheapworkbench #woodworkingbench #makeaworkbench #workbench #easyworkbench #workbenchplans
Please contact me (Barry) on the following email for any general or business related enquiries - bacrenproperty@gmail.com 
Хобби
All materials and tools are in the description - thanks for watching and if you enjoyed the video, please give it a like and consider subscribing to my channel if new here - Thank you !
That's a solid lump of a bench. Great build.
Thanks, yes it is solid and serves as a great outfeed table for the table saw. Probably a little too big but I plan on using a lot of the underside as storage so serves multiple purposes. Loving it so far 👍
I enjoyed watching the method used to measure and align your table saw to the bench top. It turned out great. Cheers 👍😎🇦🇺
Thank you! Cheers! 👍
What an amazing work bench you have built there Barry 👍
😂 Not that amazing but it will serve my purpose nicely Thanks for the comment 👍😎
Thanks for the video. Looks very strong and purposeful. Cheers.
Cheers Ian 👍
Excellent, thanks
Glad you liked it and thanks for the comment 👍😎
Cracking job big yin as always 👏
It will have to do Ian, should do the job and great to finally have the table saw mounted as opposed to using anything and everything as an outfeed table 😂 Cheers for the comment bud ! 👍
@@Bacrenfencing you'll get good use out it m8 👍
Nice set up! I hope to get my house sold, and buy a bigger place to build a nice shop or two! Then I can get my video better and more consistent.
Thanks buddy, yes, that's what we did about 10 years ago, it is great to have more space (but never enough 😂). I am just currently trying to set up a dedicated work shop for wood and metalwork hence the new workbench. Looks like I can get some good ideas from your channel, Looks good, I'm away to have a watch now. All the best and hope you get a bigger place sorted in the future. 👍😎
Just subbed, you remind me of me 👍
Hi Barry that's one solid looking bench and a nice design, I take it it's getting a colder up there now so good your getting the workshop set up for some indoor projects, hope you and the family are all keeping well. All the best mate 👍
Cheers Rob, Yes, getting a lot colder now, bloody freezing today. Yes, been modifying my workspace due to the fencing business, this bench was built with gate production in mind, so will be very handy in the winter months. Yes, family all good, hope you guys are too mate 👍😀
This is great!! Looks simple and structural 🥳 does it matter what type of plywood you use? Like cabinet grade vs regular sheeting?
No it does not matter what plywood you use, just make sure it is heavy duty enough to make a solid top. I used 3/4" plywood for mine as it gives a nice flat surface and it is solid. You can use anything really, plywood, heavy MDF or even make solid timber glued together - whatever suits your purpose and budget. Thanks for the comment 👍😀
Great video, I’m keen to try and make something similar. How do you find the stability of the castors in their locked position when using the bench? Would it be worthwhile thinking about the retractable type castors that allow the legs to sit on the ground when castors not in use?
Thanks Gary, to be honest I think the retractable type would be more stable as the castors on mine do move very slightly even when locked off, but it does not bother me too much. Thanks for the comment 👍