Kato Unitrack Double Crossover Turnout Repair 20-210 (N Gauge)

I went to use an old Kato Unitrack Double Crossover Turnout part number 20-210 (N Gauge) when I found only 3 of the 4 turnouts were operating when a 12V pulse was applied to the turnout.
This video describes shows how I repaired it
Australian T Trak website
sites.google.c...
T Trak, Ntrak website
www.ntrak.org
Kato Unitrack website
www.unitrack-k...

[@Hyperbole77]

Good job! And yes, expensive. Looks like you saved some 💰

[@wimbletrain]

Hi, always good to save the 💰😄👍👍 Thanks for watching!

[@Wickford_N_Gauge]

Greetings to the Upside-down and hello John 👋 the ultimate horror 😱 four turnouts in one 🤯 great piece of detective 🕵️‍♂️ work 👍 and a quick fix 😀 shows you don't need to be afraid of fiddly N Gauge 😉 Very best wishes from the Emerald Isle ☘️

[@wimbletrain]

Hi Paul, yes 4 turnouts in one, what could possibly go wrong! I think I noticed that the lights in the house dimmed when I operated it 🤣🤣🤣. All the bestest from the south

[@alexmorgan2296]

Helpful - as ever. And Compliments of the Season.

[@wimbletrain]

Hi Alex, thankyou and all the best to you for the festive season!

[@daniellojtek]

Nice video

[@wimbletrain]

Thanks Daniel

[@timpearson9870]

Thanks John, I have 5 of these planned on my layout.... good to know 👍

[@wimbletrain]

No worries Tim, all the best

[@ngaugefouroaksstreetstatio6932]

It's always a great feeling when you fix something, excellent and Merry Xmas John.

[@wimbletrain]

Hi Chris, lucky it was an easy fix this time! All the best for Christmas and the New Year

[@davestrains6816]

Glad you got it fixed. Nice how too video and thanks for sharing. Dave

[@wimbletrain]

Cheers Dave!

[@hotportugal2786]

Good advice, thanks John

[@wimbletrain]

Thanks

[@SteveH-TN]

Thanks for sharing this video and information

[@wimbletrain]

No problem Steve, thanks for watching

[@mysticrailroad]

very helpful video John, thanks. Nice work! :)

[@wimbletrain]

Thanks John, for once it was an obvious fault and easy fix!

[@ModelTrainOutsider]

Nice walk through !

[@wimbletrain]

Hi Anthony, lucky that this one was an easy fix

[@jimgomez5396]

I need to check mine it just stopped working lower right won't move with power, the other 3 cycle fine, thanks for the info!

[@wimbletrain]

Hi Jim, good luck with it, I would be interested to know how you go. John

[@jimgomez5396]

@@wimbletrain spring came out, re installed. Tested ok, that's fun doing without the first cup of coffee! Took a couple of trys due to the shakes lol, thanks again!

[@wimbletrain]

@@jimgomez5396 That's great that is was a relatively easy fix. LOL, I know what you mean with the shaky hand!