Rather than buy a 3rd TX16S... I've decided to buy/change the Pots and 04 Gimbals once they are available. I already have the ELRS Modules to plug int the JR Bay.
Hi Andrew, i allsow sent my sd-card direct in the case of my Eachine TX16s :-) . Looks like Radiomaster uses the Eachine improvements for their own TX16s II.
Good review, thanks! My only concern / main gripe with the previous version was the 80mW max output on the Frsky protocol. Frsky radios as well as the XJT module all output 100mW and the lower power of the TX16S had a noticeable effect on range. I'm assuming then from the specification & photo's that the module hasn't been upgraded or had it's output amplified in this version?
Looks pretty competent to me (and so does the radio, Andrew🤭). I'm still not a fan of touch-screens or the vogue for multicoloured, cluttered displays, though. They remind me of those angry wristwatches aimed at teenagers which have at least 30 'essential for urban combat situation' functions plus a mixed analogue-digital display in tiny weeny graphics against a messy camouflage/mock carbon-fibre background. Ironically, actually telling the time takes a considerable amount of time. I think a simple big, blocky monochrome display is all that a computer radio needs. Your opinion may vary, depending on your age. Eh? What's MY age? Tut, tut. If you're old enough to ask that, you're too young to know. 😁
Personally I found the most intriguing aspect of the radio to be the shiny reflective screen - will allow us to follow the ebb and flow of the young fellah's jowls as the years pass. 😝😁
@@AndrewNewton 😁 LOL. Lucky that you can't see yours truly. It's a pretty tight race between my old house cat and its owner who deserves the "Garfield" moniker most!
Thanks for the review! I've been wanting to upgrade from my TX-12 to the TX-16S & Edge-Tx for a while now. You just convinced me to go for it! Thanks!👍
be carefull regarding the elrs modul if you are an EU citizen or any western country where the elrs modul is mostly illegal due to missing certification. Not a big deal for many if illegal, but your customs might have a list and will reject anything elrs* containing. The elrs modul has also no CE marking so the customs becomes the big hurdle even if import vat are paid in advance. Once the customs rejects it the shipping goes back which takes a while longer and might be without tracking. I had to open a paypal claim. And finally the colour screen does not exist out on the field cause you can't read it in sunlight cause it is still the chrapest touch screen they could get and far worser than even cheap smartphones offer. Not sure if you might be blinded by the specs cause it is not that much better than your current one cause it is still it a big bulky heavy radio and the Zorro is a bigger milestone as Andrew had mentioned. and it is twice the price when it had been introduced back late 2019 in a pre sale with delivery in April 2020. We have purchased 15 of these over the past years in 4 or 5 batches for the club and the course participants. Good quality - mostly, but among the participants only a few elderly still go for tx16s due to bigger screen and better readability inside, while the radiomaster Zorro and Jumper T-lite are now the new kings as 85% go for these, 5% are fr sky bound and 10% tx16s once they had had all 3 in their hands. Yes, the new is a better one, but you pay an awfull lot for smaller improvements. I am a big fan of radio master radios but no longer for such a high or increased price. It is no longer a budget radio, 50$ more for close to nothing cause radiomaster does only iron things out they should have done ages ago cause the potentiometer with better dent or sliders with stronger friction are just cents more And check the eachine one which is made by radiomaster for banggood with better switches and other minor improvements which can be a lot cheaper and most likely will be also getting an upgrade. for 200$ it is no longer such easy decision if you look at it more closer. We went for Radoomaster Zorro and Jumper t-lite after long debates - even before Mark 2 was released after they had increased prices and released new products. If you are in need for a big screen @ home it might be worth, otherwise not really.
I bought a TX16S back in October last year, and it seems to be a MK1.5 version, it has the same gimbals as this MK2 but the thicker grips which I am desperate to swap to thinner ones, and the older dials and sliders. Its a great radio but I had to unsolder the trainer port and rearrange the metal contacts inside it to make it compatible with regular 3.5mm jacks. The cool thing with this Mk2 is all the important upgrades should be compatible with the older one. But the shops in the UK haven't got these new spare bits in stock yet!
Andrew: Very nice thorough, well photographed review. Have you tried the Eachine edition of the Radiomaster TX16S? Mine has some of the features of the Mk II, like external gimbal adjust, stronger detents in potentiometers, & lower positioning of 6 push buttons next to the monitor. Just came with OpenTx when I bought it last Dec. Do you use the 6 push buttons? How? Jim
check the eachine offer first cause that is cheaper and made by banggood. the radiomaster mark 2 price is now twice of that what we paid 2 years ago and about 200$ no longer a budget radio, Eachine was on sale for about 150$, but the biggest competitors are radiomasters zorro and jumper t-lite.
Great summary, particularly liked the side-by-side comparison on the workbench. Wondering if the upgraded slides would be an easy swap into the original Tx16s? (not seeing sliders replacement parts listed on Radiomaster website, but believe they were previously)
G'day Andrew I love the RadioMaster gear and use all there Rx's now as FrSky has screwed me with NO Access!!!. I would love to own a TX16S but at the moment it is not warranted as my QX7 is still Soldiering on. I will be purchasing a Zorro though, (thanks to your great reviews), to use with my smaller aircraft and beach flying. Hope you are enjoying your new surroundings mate.. Cheers. ((nice catch))
Nice description for radiomasterTX16. I also have this radio. A question Andrew, isn’t there a headphone jack to hear telemetry voice like vario etc.. ? Congratulate you are your reviews you do, you are very good, I always follows you. You are great a greeting from Switzerland. Ciao Carlo 😉
Hey can you show the interior of the Bixler 2? In RUclips shorts or easy uncut Video Is it easy to put large Matek F4 Wing WSE FC in ther? What is the room to put the electronics in and how difficult than i can Calculati if i should buy it
Lol, about a year ago i emailed Radiomaster and asked them to consider releasing a replacement back for the Tx16s that had flat grips and they replied saying they had no intention of doing so and that EVERYONE loved the chunky grips, guess nobody will be buying the flat version of the Mk2 and they are making it just for fun then ha ha. I have to disagree that the Mk2 would be better with a folding handle, many of us clamp things to the handle, in my case, my Tx16s has a 4w 2.4ghz amplifier attached to it.
@@AndrewNewton not many have high power 4w 2.4ghz amps on their radio like me but a not insignificant number use things like dragonlink and more with monitors clamped to the handle, its used a surprising amount for mounting stuff.
Random question --- will you be testing the HeeWing Ranger at some point? It's wild, everyone I trust online has flown either the Albabird or the Ranger, but no one has flown both! I'd love to see a comparison of these two twin-engine planes.
Hi Andrew, Great video as always. Could you do a side by side comparison with the Radiomaster TX16X MK2 and the FRSKY X20 please. I'm torn between the two. If the X20 had Open TX or Edge TX it would be a simple decision. THANKS
Having signal issues with mine. It's my second one an mk2 but keeps going rf signal critical. Never been dropped or opened only a few months old. Using flysky ia6b and spektrum receivers and both present the same issue.
Hi Andrew, I have just Purchased the TX16S MII, but do not have the knowledge to transfer models from My Taranis X9D + Being an old fart, I find the technical stuff a bit overwhelming. Can You Help? I have the Edge TX companion on my windows 10 PC and on the TX16S , but cannot get the companion to recognize my Taranis. Regards, Ron
Hi! Million thanks for this video 😎👍🏾. Today ive just done two flights( a full equipment maiden actually- TX16S mk2 v4 Edgetx,R88 wired as sbus,Zohd Kopilot Lite ,Bixler3), but im get upset.. 1- rssi not good, during takeoff only get around 67db. While flying around 90ft tx16s says 'rssi low' @ 52db.. the furthest ive tried is around 120ft and tx16 says 'rssi critical' and at 39db..almost lost signal. Have tried both D8 and D16 protocol on the Frsky modulation.also same.R88 rx dual antenna angled at 90deg or 180deg also same, rssi not strong and not full up to 100%. 2- 1st flight done. Manual & Balance mode is fine,if switched to RTH mode the Bixler just circling above me at 50ft+-, it wont self land to runway(as i set during power up the plane on the middle of the field).. i did adjust the Rth/Rad Pot clockwise till it stop.as illustrated in zohd manual. 3- second flight. Tried change rf protocol to Frsky,D16 8Ch.and tried both style angled antenna( 90° & 180°), still didnt get full rssi to 100 during sit on runway.just got under 77db.. Managed to fly around 100ft radius only,during last landing ive stalled the bixler and it just dive stall from 20ft height..no way to survive it😅..loll Conclusion: what is not right about it? Did i missed setup something on Tx16s that i just bought new? Kopilot unit- RTH function didnt land the plane, is it just thats all? The day before, i did try out other setups: elrs mode. Jumper Aion mini tx module & Jumper Aion mini 2.4 Rx(pwm).. only ch a.e.t.r did work, but ch5 for use the flight mode is not work..anyway i did not have access to see the Aion mini Rx pwm signal graph,as my laptop is not compatible to download the Expresslrs Configurator(mine is Windows8, popup blocked says didnt have 64-bit to run it)🤦🏻♂️ Or should i try my other ORX receivers tats laying around? Got a Orx R610Lite v2, a Orx NanoRx ppm rx, a JR R721 and a R921 rx sets.. Btw/: i will be need to have at least 7or8 useable channels to run also an fpv pantilt 2servo gimbal. Will someone please help me out...?😭 Ill be really appreciate your help.
Did you read the R88 manual? Look at the frequency tuning part. Kopilot does not self land. Also read up about ELRS channel 5, It is reserved for arming only.
@@AndrewNewton hi Andrew! Thanks for responding.. Yes i did go through the manual instruction firstly.have tried both D8 & D16 protocol,except the S-FHSS.. Ohh, i thought Kopilot did have the ability to land down planes😅.. But...whats the different of that RAD to RTH mode? Im curious now, as during the flight tested its react as if it doing fence mode. . .🤔
Andrew I have watched this video and your one on the Zorro. I am looking to purchase my first Edge TX radio. I fly slope, electric and IC nothing really requiring more than 6 channels (split ailerons + flaps). It seems that the Zorro has enough functionality to cover all of my flying needs (I saw you setup crow on the Zorro and it has 2 sliders available). In your opinion is there a reason I should buy the larger/heavier/double the cost TX16s II over the Zorro (I did notice you saying the Zorro may become your goto daily flyer radio). Any chance of you doing a side by side comparison of the two - on the bench would be fine. Can both radios support the same number of models? Does the 4in1 module have the same output power on both radios? Appreciate your advise. Regards Ian.
Very much personal preference. Zorro is great for the majority of my flying. Don't know about output power, but for longer range and proven reliability I would go back to the single protocol FrSKY Taranis QX7 or Tandem X20 rather than any multi protocol radio.
@@AndrewNewton Cheers for that Andrew - I already have a number of Spektrum receivers and a couple of Spektrum DX5e TX's plus a recently aquired DX6i (all of which were purchased 2nd hand - none of which do voice prompts) - I was looking for something that I could use for a variety of models and thought about going for a Edge TX with multiple protocols (as it will talk to all of my Spektrum RX's) - I guess best bet at the moment is to investigate the DX6i and setting up crow etc (my thought was why learn all the Spektrum bits if I was going to go Edge TX which is obviously different). I will at least keep the Spektrum DX5e Tx's as that will allow me to give a TX and a model to friends to fly on the slope - I sooo luv EPP/EPO slopies for newbies/friends.
@@AndrewNewton ok , my current rltx is a jumper t12pro that is small , i also have small hands but i like the additional switches of the t16xs. thanks for answering my question!!
Merhaba Beyfendi iki kumanda arasında kararsız kaldım acaba siz hangisini önerirsiniz -(Radio Master Radiomaster TX16S) -(RadioKing TX18S/Lite Hall sensörü) Gimbals
Hi Andrew, I alway like your reviews as well as your channel. I just bought one TX16S Mark II but I cannot bind it to my flysky reciever FS-IA6B . The module status doesn't appear on the model set up . I don't know why. Your help is really appreciated . Thanks
Hi Andrew, thanks for quick reply. In the internal RF , I choose Multi and RF protocol is flysky . Then on the module status it stats that No Multi-telemetry detected . Binding is not successful
@@AndrewNewton Thanks Andrew for your quick response. I did select Flsky2A and proceeded to binding but at the module status, it shows no multi-telemetry detected . Therefore, when I clicked bind. it did not bind to the receiver. By the way what is your firmware version ? I don't know what wrong with it .
@@lecturerchandarakhan1253 Maybe you need a Module firmware update. Here are screen shots of my versions ruclips.net/user/AndrewNewtonAustraliacommunity
I Andrew, thinking of getting this tx or boxer, after listening to your reviews.. I have a few flysky rx's FSIA6B and, as we spoke before, I want to use vario, I already use a flysky voltage sensor, can you suggest a sensor for vario that will plug into the voltage sensor chain. Thanks for your anticipated assistance. Tony
Thanks Andrew, it will have to frSKY receiver then! Still like the Tx16s mkii 4 in 1 with the big screen, still don't understand ExpressLRS. I think the 4 in 1 will suit me better for elec gliders, sloping and, soon, DLG! Thanks again for all your help.
@@tonytruelove3576 If you get the 4in1 you can still add an ELRS module later and have the best of both. For receivers have a look at FrSKY G-RX8 or G-RX6 that have vario built in. Note that the newer FrSKY ACCESS GR8 and GR6 wont work with Radiomaster.
Yes, I saw that I could add elrs later, if I ever get my head around it! Sure I will. I've just had a quote for all I want and it includes the gr-x8 tx with vario and they will flash it for the tx 16s mkii. Thank you so much for all your help I have lisened to so many videos, the joy of this era but your videos are about the item where as so many seem to be about the person! Cheers my friend.
Hah that happened to me the first time I tried to put the SD card back in the slot it ended up inside the case and I had to take it apart to get it back out.
TX16s running Edge and ELRS. Happy Days. One radio to rule them all.
Rather than buy a 3rd TX16S... I've decided to buy/change the Pots and 04 Gimbals once they are available. I already
have the ELRS Modules to plug int the JR Bay.
Nice catch Andrew!!
Hi Andrew, i allsow sent my sd-card direct in the case of my Eachine TX16s :-) . Looks like Radiomaster uses the Eachine improvements for their own TX16s II.
Good catch...
Excellent, as always. Learning all the time. Thank you.
nicely done
Good review, thanks!
My only concern / main gripe with the previous version was the 80mW max output on the Frsky protocol. Frsky radios as well as the XJT module all output 100mW and the lower power of the TX16S had a noticeable effect on range. I'm assuming then from the specification & photo's that the module hasn't been upgraded or had it's output amplified in this version?
Looks pretty competent to me (and so does the radio, Andrew🤭). I'm still not a fan of touch-screens or the vogue for multicoloured, cluttered displays, though.
They remind me of those angry wristwatches aimed at teenagers which have at least 30 'essential for urban combat situation' functions plus a mixed analogue-digital display in tiny weeny graphics against a messy camouflage/mock carbon-fibre background.
Ironically, actually telling the time takes a considerable amount of time.
I think a simple big, blocky monochrome display is all that a computer radio needs. Your opinion may vary, depending on your age.
Eh? What's MY age? Tut, tut. If you're old enough to ask that, you're too young to know. 😁
Personally I found the most intriguing aspect of the radio to be the shiny reflective screen - will allow us to follow the ebb and flow of the young fellah's jowls as the years pass. 😝😁
Cheeky!
@@AndrewNewton 😁 LOL. Lucky that you can't see yours truly. It's a pretty tight race between my old house cat and its owner who deserves the "Garfield" moniker most!
Thanks for the review! I've been wanting to upgrade from my TX-12 to the TX-16S & Edge-Tx for a while now. You just convinced me to go for it! Thanks!👍
be carefull regarding the elrs modul if you are an EU citizen or any western country where the elrs modul is mostly illegal due to missing certification.
Not a big deal for many if illegal, but your customs might have a list and will reject anything elrs* containing.
The elrs modul has also no CE marking so the customs becomes the big hurdle even if import vat are paid in advance.
Once the customs rejects it the shipping goes back which takes a while longer and might be without tracking. I had to open a paypal claim.
And finally the colour screen does not exist out on the field cause you can't read it in sunlight cause it is still the chrapest touch screen they could get and far worser than even cheap smartphones offer.
Not sure if you might be blinded by the specs cause it is not that much better than your current one cause it is still it a big bulky heavy radio and the Zorro is a bigger milestone as Andrew had mentioned.
and it is twice the price when it had been introduced back late 2019 in a pre sale with delivery in April 2020.
We have purchased 15 of these over the past years in 4 or 5 batches for the club and the course participants.
Good quality - mostly, but among the participants only a few elderly still go for tx16s due to bigger screen and better readability inside, while the radiomaster Zorro and Jumper T-lite are now the new kings as 85% go for these, 5% are fr sky bound and 10% tx16s once they had had all 3 in their hands.
Yes, the new is a better one, but you pay an awfull lot for smaller improvements.
I am a big fan of radio master radios but no longer for such a high or increased price.
It is no longer a budget radio, 50$ more for close to nothing cause radiomaster does only iron things out they should have done ages ago cause the potentiometer with better dent or sliders with stronger friction are just cents more
And check the eachine one which is made by radiomaster for banggood with better switches and other minor improvements which can be a lot cheaper and most likely will be also getting an upgrade.
for 200$ it is no longer such easy decision if you look at it more closer.
We went for Radoomaster Zorro and Jumper t-lite after long debates - even before Mark 2 was released after they had increased prices and released new products.
If you are in need for a big screen @ home it might be worth, otherwise not really.
Good points thanks.
I'll stick to my low end Radioking for now
I bought a TX16S back in October last year, and it seems to be a MK1.5 version, it has the same gimbals as this MK2 but the thicker grips which I am desperate to swap to thinner ones, and the older dials and sliders. Its a great radio but I had to unsolder the trainer port and rearrange the metal contacts inside it to make it compatible with regular 3.5mm jacks. The cool thing with this Mk2 is all the important upgrades should be compatible with the older one. But the shops in the UK haven't got these new spare bits in stock yet!
Thanks for useful information I brought one with 4in 1 module, bit nervous about getting it operating
Andrew:
Very nice thorough, well photographed review.
Have you tried the Eachine edition of the Radiomaster TX16S?
Mine has some of the features of the Mk II, like external gimbal adjust, stronger detents in potentiometers, & lower positioning of 6 push buttons next to the monitor. Just came with OpenTx when I bought it last Dec.
Do you use the 6 push buttons? How?
Jim
That six button array is primarily used for arduplane or similar!
I’m in the market for a new radio and wasn’t aware of this one.
check the eachine offer first cause that is cheaper and made by banggood.
the radiomaster mark 2 price is now twice of that what we paid 2 years ago and about 200$ no longer a budget radio,
Eachine was on sale for about 150$, but the biggest competitors are radiomasters zorro and jumper t-lite.
Great summary, particularly liked the side-by-side comparison on the workbench.
Wondering if the upgraded slides would be an easy swap into the original Tx16s?
(not seeing sliders replacement parts listed on Radiomaster website, but believe they were previously)
Not easily swappable unfortunately.
@@AndrewNewton Thanks for info.
Glad to see you haven't gotten on the "oh, I have to have a touch screen", bandwagon. Open Tx is just fine by me. If it ain't broken.....
I find the smaller mono screen much more readable and efficient to use
G'day Andrew
I love the RadioMaster gear and use all there Rx's now as FrSky has screwed me with NO Access!!!.
I would love to own a TX16S but at the moment it is not warranted as my QX7 is still Soldiering on.
I will be purchasing a Zorro though, (thanks to your great reviews), to use with my smaller aircraft and beach flying.
Hope you are enjoying your new surroundings mate.. Cheers. ((nice catch))
I'm still using the Zorro for everything
good video!thanks˜
Nice description for radiomasterTX16. I also have this radio. A question Andrew, isn’t there a headphone jack to hear telemetry voice like vario etc.. ? Congratulate you are your reviews you do, you are very good, I always follows you. You are great a greeting from Switzerland. Ciao Carlo 😉
Thanks so much Carlo. Yes the headphone socket is moved to the back now.
Hey can you show the interior of the Bixler 2? In RUclips shorts or easy uncut Video
Is it easy to put large Matek F4 Wing WSE FC in ther? What is the room to put the electronics in and how difficult than i can Calculati if i should buy it
No room for FC inside, difficult access.
Have a matek f405 insiders a Bixler 2. Where to i can send a photo
@@jandeboer email to me and I will share it if you want apnewton@gmail.com
Lol, about a year ago i emailed Radiomaster and asked them to consider releasing a replacement back for the Tx16s that had flat grips and they replied saying they had no intention of doing so and that EVERYONE loved the chunky grips, guess nobody will be buying the flat version of the Mk2 and they are making it just for fun then ha ha.
I have to disagree that the Mk2 would be better with a folding handle, many of us clamp things to the handle, in my case, my Tx16s has a 4w 2.4ghz amplifier attached to it.
Excellent point about the handle Steve.
@@AndrewNewton not many have high power 4w 2.4ghz amps on their radio like me but a not insignificant number use things like dragonlink and more with monitors clamped to the handle, its used a surprising amount for mounting stuff.
💕👌👍
Thanks for this Andrew! Think I’ll upgrade to this from my trusty old x9D+. I assume I can import my old Opentx models into edge?
Yes, although I haven't tried it github.com/EdgeTX/edgetx.github.io/wiki/EdgeTX-Installation-with-OpenTX-Companion
Random question --- will you be testing the HeeWing Ranger at some point? It's wild, everyone I trust online has flown either the Albabird or the Ranger, but no one has flown both! I'd love to see a comparison of these two twin-engine planes.
Yes it's on the way John
Hi Andrew, Great video as always. Could you do a side by side comparison with the Radiomaster TX16X MK2 and the FRSKY X20 please. I'm torn between the two. If the X20 had Open TX or Edge TX it would be a simple decision. THANKS
X20 is much better quality hardware but only uses EthOS and FrSKY receivers. Depends what is important to you
@@AndrewNewton Thanks Andrew, thats exactly what I wanted to know
Having signal issues with mine. It's my second one an mk2 but keeps going rf signal critical. Never been dropped or opened only a few months old. Using flysky ia6b and spektrum receivers and both present the same issue.
I'd be checking your TX16S antenna connection. Might be broken.
@@AndrewNewton thank you I'll open it up and take a look
Hi Andrew, I have just Purchased the TX16S MII, but do not have the knowledge to transfer models from My Taranis X9D + Being an old fart, I find the technical stuff a bit overwhelming. Can You Help? I have the Edge TX companion on my windows 10 PC and on the TX16S , but cannot get the companion to recognize my Taranis. Regards, Ron
Hi! Million thanks for this video 😎👍🏾.
Today ive just done two flights( a full equipment maiden actually- TX16S mk2 v4 Edgetx,R88 wired as sbus,Zohd Kopilot Lite ,Bixler3), but im get upset..
1- rssi not good, during takeoff only get around 67db. While flying around 90ft tx16s says 'rssi low' @ 52db.. the furthest ive tried is around 120ft and tx16 says 'rssi critical' and at 39db..almost lost signal.
Have tried both D8 and D16 protocol on the Frsky modulation.also same.R88 rx dual antenna angled at 90deg or 180deg also same, rssi not strong and not full up to 100%.
2- 1st flight done. Manual & Balance mode is fine,if switched to RTH mode the Bixler just circling above me at 50ft+-, it wont self land to runway(as i set during power up the plane on the middle of the field).. i did adjust the Rth/Rad Pot clockwise till it stop.as illustrated in zohd manual.
3- second flight. Tried change rf protocol to Frsky,D16 8Ch.and tried both style angled antenna( 90° & 180°), still didnt get full rssi to 100 during sit on runway.just got under 77db..
Managed to fly around 100ft radius only,during last landing ive stalled the bixler and it just dive stall from 20ft height..no way to survive it😅..loll
Conclusion: what is not right about it? Did i missed setup something on Tx16s that i just bought new?
Kopilot unit- RTH function didnt land the plane, is it just thats all?
The day before, i did try out other setups: elrs mode. Jumper Aion mini tx module & Jumper Aion mini 2.4 Rx(pwm).. only ch a.e.t.r did work, but ch5 for use the flight mode is not work..anyway i did not have access to see the Aion mini Rx pwm signal graph,as my laptop is not compatible to download the Expresslrs Configurator(mine is Windows8, popup blocked says didnt have 64-bit to run it)🤦🏻♂️
Or should i try my other ORX receivers tats laying around? Got a Orx R610Lite v2, a Orx NanoRx ppm rx, a JR R721 and a R921 rx sets..
Btw/: i will be need to have at least 7or8 useable channels to run also an fpv pantilt 2servo gimbal.
Will someone please help me out...?😭
Ill be really appreciate your help.
Did you read the R88 manual? Look at the frequency tuning part. Kopilot does not self land. Also read up about ELRS channel 5, It is reserved for arming only.
@@AndrewNewton hi Andrew! Thanks for responding..
Yes i did go through the manual instruction firstly.have tried both D8 & D16 protocol,except the S-FHSS..
Ohh, i thought Kopilot did have the ability to land down planes😅..
But...whats the different of that RAD to RTH mode? Im curious now, as during the flight tested its react as if it doing fence mode. . .🤔
Andrew I have watched this video and your one on the Zorro. I am looking to purchase my first Edge TX radio. I fly slope, electric and IC nothing really requiring more than 6 channels (split ailerons + flaps). It seems that the Zorro has enough functionality to cover all of my flying needs (I saw you setup crow on the Zorro and it has 2 sliders available). In your opinion is there a reason I should buy the larger/heavier/double the cost TX16s II over the Zorro (I did notice you saying the Zorro may become your goto daily flyer radio). Any chance of you doing a side by side comparison of the two - on the bench would be fine. Can both radios support the same number of models? Does the 4in1 module have the same output power on both radios? Appreciate your advise. Regards Ian.
Very much personal preference. Zorro is great for the majority of my flying. Don't know about output power, but for longer range and proven reliability I would go back to the single protocol FrSKY Taranis QX7 or Tandem X20 rather than any multi protocol radio.
@@AndrewNewton Cheers for that Andrew - I already have a number of Spektrum receivers and a couple of Spektrum DX5e TX's plus a recently aquired DX6i (all of which were purchased 2nd hand - none of which do voice prompts) - I was looking for something that I could use for a variety of models and thought about going for a Edge TX with multiple protocols (as it will talk to all of my Spektrum RX's) - I guess best bet at the moment is to investigate the DX6i and setting up crow etc (my thought was why learn all the Spektrum bits if I was going to go Edge TX which is obviously different). I will at least keep the Spektrum DX5e Tx's as that will allow me to give a TX and a model to friends to fly on the slope - I sooo luv EPP/EPO slopies for newbies/friends.
do you have any opinion about tye boxer vs the tx16s and for flying rc planes. tks
I'm not a fan of the colour touch screen version of EdgeTX so I would prefer the Boxer, but I actually use the Zorro for everything.
@@AndrewNewton ok , my current rltx is a jumper t12pro that is small , i also have small hands but i like the additional switches of the t16xs.
thanks for answering my question!!
Yes the TX16S has plenty of switches and sliders.
@@AndrewNewton thanks Mr Newton!!
Merhaba Beyfendi iki kumanda arasında kararsız kaldım acaba siz hangisini önerirsiniz
-(Radio Master Radiomaster TX16S)
-(RadioKing TX18S/Lite Hall sensörü) Gimbals
They are almost the same radio, but the TX16S is the original so I would go for that.
Hi Andrew, I alway like your reviews as well as your channel. I just bought one TX16S Mark II but I cannot bind it to my flysky reciever FS-IA6B . The module status doesn't appear on the model set up . I don't know why. Your help is really appreciated . Thanks
Tell me what you see beside "Internal RF" in the Model Setup page
Hi Andrew, thanks for quick reply. In the internal RF , I choose Multi and RF protocol is flysky . Then on the module status it stats that No Multi-telemetry detected . Binding is not successful
@@lecturerchandarakhan1253 Protocol required is Flsky2A. Then put the receiver into bind mode, then click BIND on the transmitter.
@@AndrewNewton Thanks Andrew for your quick response. I did select Flsky2A and proceeded to binding but at the module status, it shows no multi-telemetry detected . Therefore, when I clicked bind. it did not bind to the receiver. By the way what is your firmware version ? I don't know what wrong with it .
@@lecturerchandarakhan1253 Maybe you need a Module firmware update. Here are screen shots of my versions ruclips.net/user/AndrewNewtonAustraliacommunity
I Andrew, thinking of getting this tx or boxer, after listening to your reviews.. I have a few flysky rx's FSIA6B and, as we spoke before, I want to use vario, I already use a flysky voltage sensor, can you suggest a sensor for vario that will plug into the voltage sensor chain. Thanks for your anticipated assistance. Tony
Cant have vario with FlySKY receivers unfortunately, they dont make one. FrSKY do make a vario that works with FrSKY S-Port receivers
Thanks Andrew, it will have to frSKY receiver then! Still like the Tx16s mkii 4 in 1 with the big screen, still don't understand ExpressLRS. I think the 4 in 1 will suit me better for elec gliders, sloping and, soon, DLG! Thanks again for all your help.
@@tonytruelove3576 If you get the 4in1 you can still add an ELRS module later and have the best of both. For receivers have a look at FrSKY G-RX8 or G-RX6 that have vario built in. Note that the newer FrSKY ACCESS GR8 and GR6 wont work with Radiomaster.
Yes, I saw that I could add elrs later, if I ever get my head around it! Sure I will. I've just had a quote for all I want and it includes the gr-x8 tx with vario and they will flash it for the tx 16s mkii. Thank you so much for all your help I have lisened to so many videos, the joy of this era but your videos are about the item where as so many seem to be about the person! Cheers my friend.
Can I buy your old 16 ? Canada
Wouldn't be worth it with postage.
Hah that happened to me the first time I tried to put the SD card back in the slot it ended up inside the case and I had to take it apart to get it back out.
Happened with my 3D printer too