🚁Buy your own here and use code:1016 for 15% off 🚁 www.stirlingkit.com/products/yu-xiang-f08-bell-206-brushless-beginner-helicopter-2-4g-6ch-flybarless-rc-helicopter-model-rtf?_pos=2&_psq=Bell&_ss=e&_v=1.0&ref=S9u4d
Here to give as much back to you guys as you've given me, today we will hit 1.5m views you know how wild that is, your support is amazing mate, I just wanna give back as much as possible to yall. Best of luck mate
Nice review, thanks. I see on the RX/control board that there are 2 open ports. Do you have any idea what they are for? Can you bind another transmitter to it?
I've just got this Bell, firstly, does it need to spool up to a certain rpm before take off and have you had the battery fall out during flying or landing ? Just asking because mine binded OK but on initial take off it jumped up very quickly and hit me.... 7 stitches later I'm wondering if mines a duffer.... Thanks and a very good video 👍
OUCH hope your healing up okay buddy. What EXACLY happened? It does take a few seconds to spool and then when you raise the throttle the sensor takes a couple more to check the distances etc and then should just lift. Did you get a video?
@squaddingquads no video, I'd been flying my B0 105 and my mini Bell helis, it all went OK, i noticed it needed more throttle, it seemed like it didn't have enough positive pitch, it just sprung up straight at me, I've been flying helis since 2008, my brother was manager for Century Models, so I've flown more than most !
To be honest it looks nice from the outside but I don't like micro helikopters they are smal and complex to repair I have a eachine e120S RTF and sometimes by take off or during the flight its spins around its own axis because of the motherboard has broken and than suddenly it started messing around with the rotation. I thought it was just me, but it was the motherboard and then you get very vague complaints with all the consequences that it becomes uncontrollable.
The cheaper ones are cheaper for a reason I suspect, if you watch this video when u take it apart it does seem to drip with quality. I've not seen any others to directly compare but carbon and motor and solder joins in this all point to something decent, hence why it flys lovely
🚁Buy your own here and use code:1016 for 15% off 🚁
www.stirlingkit.com/products/yu-xiang-f08-bell-206-brushless-beginner-helicopter-2-4g-6ch-flybarless-rc-helicopter-model-rtf?_pos=2&_psq=Bell&_ss=e&_v=1.0&ref=S9u4d
🚁Buy your own here and use code:1016 for 15% off 🚁
F08 Bell 206 Helicopter:bit.ly/3OONjak
Can't pass on the chance to fly a proper Helicopter for once. Looks lovely.
@@neuromancer692 I want to get my hands on the bigger ones now 😍 20 years waiting to fly one again and now I'm hooked
Another banger givaway W
Here to give as much back to you guys as you've given me, today we will hit 1.5m views you know how wild that is, your support is amazing mate,
I just wanna give back as much as possible to yall.
Best of luck mate
Classic helicopter and this is a good looking model of it.
Absolutely love the scale detail of it and if corusr the fact evje I can fly it hahaha.
Thanks for the support
Awesome helicopter! Can't wait to see it fly
Hope you enioyed the video
Can't wait for mine, coming this week 👏
Hype!!!! Be sure to let us know what you think
is it possible to program pulling collective pitch instead of pushing?? Thank you
I don't believe so no
Nice review, thanks. I see on the RX/control board that there are 2 open ports. Do you have any idea what they are for? Can you bind another transmitter to it?
That's from the lights I removed them when taking the body panels off
@@squaddingquads Great, thanks
Damn that's a BEAUTIFUL thumbnail photo WOW.
Wish me luck firnthe competition though 🎉
Good luck man
I subbed to that site, great link thanks - those micro engines look fantastic
Best if luck with it man, they really are something else.
I love ❤ this helicopter so much,shes freaking beautiful❤
Preach 👏👏👏👏👏
Done. I watch your videos everyday u are the best keep up your hard work
That's far too kind, thank you so much
I've just got this Bell, firstly, does it need to spool up to a certain rpm before take off and have you had the battery fall out during flying or landing ? Just asking because mine binded OK but on initial take off it jumped up very quickly and hit me.... 7 stitches later I'm wondering if mines a duffer.... Thanks and a very good video 👍
OUCH hope your healing up okay buddy.
What EXACLY happened? It does take a few seconds to spool and then when you raise the throttle the sensor takes a couple more to check the distances etc and then should just lift.
Did you get a video?
@squaddingquads no video, I'd been flying my B0 105 and my mini Bell helis, it all went OK, i noticed it needed more throttle, it seemed like it didn't have enough positive pitch, it just sprung up straight at me, I've been flying helis since 2008, my brother was manager for Century Models, so I've flown more than most !
Cool video , I'd be scared to fly it in that rain and water though
@@Crucifer_Immorta took it like a champ
Nah Bro I NEED one of those mini engines 🎉🎉🎉🎉🎉
Ain't they just amazing
To be honest it looks nice from the outside but I don't like micro helikopters they are smal and complex to repair I have a eachine e120S RTF and sometimes by take off or during the flight its spins around its own axis because of the motherboard has broken and than suddenly it started messing around with the rotation. I thought it was just me, but it was the motherboard and then you get very vague complaints with all the consequences that it becomes uncontrollable.
The cheaper ones are cheaper for a reason I suspect, if you watch this video when u take it apart it does seem to drip with quality. I've not seen any others to directly compare but carbon and motor and solder joins in this all point to something decent, hence why it flys lovely
Yes, sexy Helicopter, you flying pretty well
Thank you very much 🚁💪
Great stuff!!!..😃😃😃👍
Thank you! Cheers!
Keep up the great work!
Thanks, will do! & Good Luck
nice video
Thanks so much guys I really appreciate the support, I asked Santa for an Apatchi 😉
I would like to win the drawing.Like your channel.
I wish you the best of luck
Pick me ive always wanted a helicopter 😊😊😊❤❤❤ 🎉🎉🎉
❤🎉
Good luck with the comp 🚁 and thanks for the support