Nice Fausto 👌 It is a Kind of funny, you and I get some Motivation from this project to Start over the freed energy stuff. I have replicated this with some modifications that I have learned over the time. Today my Signal generator arrives, then I can tune the coils. Cheers and thank you! ☺️
You will find yourself in a rabbit chase around that tuning because we expect to have RESSONANCE and for that we have to find the correct Inductance (which is set because we wind the coil) and the capacitors but the load will change the frequency of the driving circuit and you find yourself back again re-tuning. . But when you have "some" tuning and somethings going right watch out for the transistor not to burn. . That's was my first motivation for removing the 30k resistor all together and not close the loop of the secondary coil.
Ok with the ground thing. You need to take into account the capacitance between the ground and the device itself and it also must be included in the resonance calculations if you want the ground to deliver any appreciable current. And yes resistance also must be included in all resonant circuits as it impedes the current available within the circuit. The bifilar coil also negates cemf and hence why you are detecting your AC because that signal is so close to your bench. The only thing holding you back is the pure resistance of the path to ground. Lessen that resistance and walla another clone of the original source all for free in a sense, - the cost to make the device. Tesla was also the king of oscillators and that includes a blocking oscillator like his Tower was. Once you start the blocking oscillator it will run like the old lawn watering devices for your lawn. Establish a flow then let it oscillate away. The flow in this case was from the plasma he knew was around the sun and discharging to us. Our planet acts like a sink and all bodies do in the Suns electrical body, the charged plasma coming from the solar wind and other space weather events was his source. Start the flow of that tower blocking oscillator and let it tick away. Put receivers anywhere you like in our atmosphere and collect a mirror image of the free pooling plasma and shunt it to ground for which it seeks in the locality of the receiver. The bifilar coil is a beautiful invention that by the way Tesla did not invent. It was common knowledge at the time and the first appearance of anything like the bifilar coil was from German man called Wilhelm Eduard Weber in 1848 in his electrodynamometer. For many years we banged the forums trying to get others to see that the bifilar method indeed has unique cemf and bemf cancellation abilities in certain modes of operation. There are a great many avenues to go down as even Tesla stated that this method could net more out when used with natural flows like Niagara Falls. This was just a small portion to the experimentation that Tesla and others have done. The field is wide open once you identify the source of the flow of energy and the method to harnessing that flow. You are on the right track my friend. Have fun exploring where almost no one looks... After Tesla lost his Tower he pulled back into his suite and left bread crumbs for the truly inquisitive to find. He exclaimed the rest I Leave for others to explore when they go where I have gone. My take on his words there. Tesla knew that the Sun was and how it worked. He saw it in his experiments with higher frequencies and voltages. He knew what gravity is and that it was the Aether seeking a Vacuum of Aether which our planet is. Well All bodies really, in our Solar space. Tesla knew how to deal with plasma and discharges. He knew it didn't like to be squeezed or z-pinched and when it was, what effects that z-pich would radiate out. Unfortunately the old spark gaps are difficult to maintain but yes the vacuum or gas charged tube could be thought of as an instant switch based upon the discharge theory and electrical conduction through gasses of all kinds or just pure neutral plasma in the vacuum tube condenser.
Thank you for great information, I will study more about Weber, after all his name is important, we even have a unit in his name. . I see the ground as an infinite number of capacitors in parallel and in series, and also as an infinite number of inductors in parallel and in series and that should make you think about the possbilities concerning ressonance. . What really ticked me on this experiments (specially after a decade of dormancy) is the ground energy. I was just playing with this Ringer when I let my arm touch the secondary (hot wire coil) and one wire touching the ground: I got a huge zap!!! . The next thing that came to my mind was: where this zap came from because I could touch anywhere in the device (the whole apparatus) and nothing would happen, specially knowing that it was running from a 12 volts 5 amp/hour battery, so the whole circuit was floating and no reason for the ground to zap me. . The rest is now, I am SUPER EXCITED about this circuit and more is coming.
@PlengoFreeEnergy . And I think the Neon Bulb or "Gas Dischage Cold Cathod Tube" (as our lovely friend from MTEch says - I could be a little bit incorrect here) is key because it REALLY made the circuit FLOATING and creating HIGH VOLTAGE (over 1 thousand volts - yea hot hot hot) and allowing me to plug the output to anything even itself and then some other crazy stuff starts happening, but lets go slow first. .
@@PlengoFreeEnergy Tesla was fond of the ground as a one wire conductor or a single plate of a capacitor between the ionosphere and the real ground. Your device should include this because you can steer that energy into a device that strips the energy as it goes to ground. Also Tesla's pierce arrow experiment was a take on the tower system in portable with a floating ground that is hooked to ground via the capacitance between the ground and the device.
@@PlengoFreeEnergy kapanadze did the same with his devices but he used a system that held AC on one side and separated the DC to the other after the AC was converted to DC to feed back the energy to the start. This way you can use induction to get the energy into the system via a coil across the ground in two locations. Once you have access to the ground you can form loops that will pull in more current as needed. Which can be harvested from the ground loop back into the system. As for the discharge tube and spark gap well you are right that is the only true way to separate the circuits and just allow resonance to induce out what you need from the circuit..
Thank you for this beautiful explanation
You are very welcome
Nice Fausto 👌
It is a Kind of funny, you and I get some Motivation from this project to Start over the freed energy stuff.
I have replicated this with some modifications that I have learned over the time.
Today my Signal generator arrives, then I can tune the coils.
Cheers and thank you! ☺️
You will find yourself in a rabbit chase around that tuning because we expect to have RESSONANCE and for that we have to find the correct Inductance (which is set because we wind the coil) and the capacitors but the load will change the frequency of the driving circuit and you find yourself back again re-tuning.
.
But when you have "some" tuning and somethings going right watch out for the transistor not to burn.
.
That's was my first motivation for removing the 30k resistor all together and not close the loop of the secondary coil.
Ok with the ground thing. You need to take into account the capacitance between the ground and the device itself and it also must be included in the resonance calculations if you want the ground to deliver any appreciable current. And yes resistance also must be included in all resonant circuits as it impedes the current available within the circuit.
The bifilar coil also negates cemf and hence why you are detecting your AC because that signal is so close to your bench. The only thing holding you back is the pure resistance of the path to ground. Lessen that resistance and walla another clone of the original source all for free in a sense, - the cost to make the device.
Tesla was also the king of oscillators and that includes a blocking oscillator like his Tower was. Once you start the blocking oscillator it will run like the old lawn watering devices for your lawn. Establish a flow then let it oscillate away. The flow in this case was from the plasma he knew was around the sun and discharging to us. Our planet acts like a sink and all bodies do in the Suns electrical body, the charged plasma coming from the solar wind and other space weather events was his source. Start the flow of that tower blocking oscillator and let it tick away. Put receivers anywhere you like in our atmosphere and collect a mirror image of the free pooling plasma and shunt it to ground for which it seeks in the locality of the receiver.
The bifilar coil is a beautiful invention that by the way Tesla did not invent. It was common knowledge at the time and the first appearance of anything like the bifilar coil was from German man called Wilhelm Eduard Weber in 1848 in his electrodynamometer.
For many years we banged the forums trying to get others to see that the bifilar method indeed has unique cemf and bemf cancellation abilities in certain modes of operation. There are a great many avenues to go down as even Tesla stated that this method could net more out when used with natural flows like Niagara Falls. This was just a small portion to the experimentation that Tesla and others have done. The field is wide open once you identify the source of the flow of energy and the method to harnessing that flow.
You are on the right track my friend. Have fun exploring where almost no one looks...
After Tesla lost his Tower he pulled back into his suite and left bread crumbs for the truly inquisitive to find. He exclaimed the rest I Leave for others to explore when they go where I have gone. My take on his words there.
Tesla knew that the Sun was and how it worked. He saw it in his experiments with higher frequencies and voltages. He knew what gravity is and that it was the Aether seeking a Vacuum of Aether which our planet is. Well All bodies really, in our Solar space. Tesla knew how to deal with plasma and discharges. He knew it didn't like to be squeezed or z-pinched and when it was, what effects that z-pich would radiate out. Unfortunately the old spark gaps are difficult to maintain but yes the vacuum or gas charged tube could be thought of as an instant switch based upon the discharge theory and electrical conduction through gasses of all kinds or just pure neutral plasma in the vacuum tube condenser.
Thank you for great information, I will study more about Weber, after all his name is important, we even have a unit in his name.
.
I see the ground as an infinite number of capacitors in parallel and in series, and also as an infinite number of inductors in parallel and in series and that should make you think about the possbilities concerning ressonance.
.
What really ticked me on this experiments (specially after a decade of dormancy) is the ground energy. I was just playing with this Ringer when I let my arm touch the secondary (hot wire coil) and one wire touching the ground: I got a huge zap!!!
.
The next thing that came to my mind was: where this zap came from because I could touch anywhere in the device (the whole apparatus) and nothing would happen, specially knowing that it was running from a 12 volts 5 amp/hour battery, so the whole circuit was floating and no reason for the ground to zap me.
.
The rest is now, I am SUPER EXCITED about this circuit and more is coming.
@PlengoFreeEnergy
.
And I think the Neon Bulb or "Gas Dischage Cold Cathod Tube" (as our lovely friend from MTEch says - I could be a little bit incorrect here) is key because it REALLY made the circuit FLOATING and creating HIGH VOLTAGE (over 1 thousand volts - yea hot hot hot) and allowing me to plug the output to anything even itself and then some other crazy stuff starts happening, but lets go slow first.
.
@PlengoFreeEnergy
.
btw, this is me the guy from the video, just my other channel.
@@PlengoFreeEnergy
Tesla was fond of the ground as a one wire conductor or a single plate of a capacitor between the ionosphere and the real ground.
Your device should include this because you can steer that energy into a device that strips the energy as it goes to ground.
Also Tesla's pierce arrow experiment was a take on the tower system in portable with a floating ground that is hooked to ground via the capacitance between the ground and the device.
@@PlengoFreeEnergy
kapanadze did the same with his devices but he used a system that held AC on one side and separated the DC to the other after the AC was converted to DC to feed back the energy to the start. This way you can use induction to get the energy into the system via a coil across the ground in two locations. Once you have access to the ground you can form loops that will pull in more current as needed. Which can be harvested from the ground loop back into the system.
As for the discharge tube and spark gap well you are right that is the only true way to separate the circuits and just allow resonance to induce out what you need from the circuit..
The neon bulb can also transfer energy capacitivly
Of course and also a current goes through when there is a plasma BUT the resistance between the terminals do not follow the regular V=IR.
You are pulling from ground but the main meter is on the hot so the supplier wont see it!