I fired them up and looked at the firmware and at some point I put stock firmware on them both. They told me where I bought them that there was custom firmware on the miners. a year later I bought an asic from a local guy and it too had that firmware so it must be out there for download. I'd watch the video and pause on the frame that I have the firmware up and then do a google search for custom asic firmware and click pictures. Try and match up the images. Remember that video is a little old so the interface may have changed. Sorry, that's all I got for ya.
Hi, At first I did everything you said but it didn't work until I read below in the comments that I should clear the cache and browser data and only after that did it work, I tried it first in incognito mode and if it opened it was because I had already done everything else, ufff I had already spent several hours trying to access
Hello, I don't understand the beginning of the video, you press for 30 seconds and you wait for the red and green lights to flash, I do it, it doesn't work, I still don't see my kso ultra displayed, help me, thank you
So when I held the reset I held it for the FULL 30 seconds. First it went red/green but then after a little longer it went just red. Then I released the button. It took about 15 sec for the red/green to flash but then 5 seconds later it went solid red. Don't forget to clear the cache in your browser before all this.
Have you cleared the cache of the browser? Can you see it on your network when you scan for it? I use Advanced Port Scanner. It's free. And if you can see it can you ping it?
tried to go to from the 618 gh overclock to the 676gh during Firmware update, it said failed, i tried again it said operation sucessfull, and to restart, I restarted, Then after waiting 15 mins or so the hashrate was 0 nothing, I tried to bring it back to the 618 firmware image_1.0 Tswift_618G_L_k0u_miner ICM168_3_2_15_ks0ultra_bg i was on that was working, but again kept saying failed , failed everytime I would try, so I tried factory reset and now the KS0 Ultra will not come back online, the lights on the back show red and green, iv tried holding them down for 20-30 seconds after plugging the power supply and ethernet, but still page loads to This site can’t be reached . I need help!
I haven't really overclocked mine but I don't think 676 is a realistic number. Is it? Idk. Can you see it with ip scanner and if you know the ip can you ping it?
I could ping it yes , I tried everything , ended up messaging Tswift and he remote me and unbricked it , now I’m running the 676gh firmware it’s runs about 670-730gh prettt good for 230w power supply. Got shrouds , bunch of fans , but I may go back down to the 618g cuz it’s getting a little hot ,
Have you cleared the cache in your browser? Also when you power down the unit to do the reset make sure it's disconnected from the Internet and power source for at least 30 seconds before plugging it back in and holding the button down for the reset. After you do the reset and you have the network cable plugged back in does it look like it's flashing as it normally would if it was working fine? After reset clear cashe and try ice river tool. Mine was coming up with the ice river scan first before my advanced IP scanner found it. Sounds like it's reversed for you.
My KS0 Ultra was Junk out of the box never worked right. It's on its second trip back to factory repair. First repair did not fix shit did not work here and that's what counts.. Iceriver is Garbage.
i fixed, thanks man.. i just fixed with open the ip on the new fress browser & its works fine..
Always clear the cache first. Glad it helped. :)
Thank you very much! With this tutorial i could unbrick my KS0 Pro!
I'm glad it helped! :)
Was unable to get to web gui as well. had given up and happened upon your vid, worked perfect thank you.
I'm glad it helped get you going. :)
Glad you fixed it. No luck for me I have the green and red lights on.
It never went solid red? That's where it all started for me. I'm sorry if it didn't work. Can you ping your ks0?
@@euclidmining I figured another way to fix it I did a firmware memory chip removal and reprogramed the chip to stock software.
I've been subscribed for a while now and love the progression ion your farm. The repairs are sick! Great content!
Hey buddy nice video I was looking at one of your old videos about the z11 with custom firmware can You send me the custom firmware plz
I fired them up and looked at the firmware and at some point I put stock firmware on them both. They told me where I bought them that there was custom firmware on the miners. a year later I bought an asic from a local guy and it too had that firmware so it must be out there for download.
I'd watch the video and pause on the frame that I have the firmware up and then do a google search for custom asic firmware and click pictures. Try and match up the images. Remember that video is a little old so the interface may have changed.
Sorry, that's all I got for ya.
I've had the same issue. Thanks for sharing!
Hope it helped. :)
You can also use a private windows to have acces to the webgui in your case, usually happen after a reset.
but on iceriver software when I click on ip reporter I see my ip address, but when I go to scan I only see my other kso
I see it on advanced ip scanner
Hi, At first I did everything you said but it didn't work until I read below in the comments that I should clear the cache and browser data and only after that did it work, I tried it first in incognito mode and if it opened it was because I had already done everything else, ufff I had already spent several hours trying to access
I'm glad you're up and running. :)
Hello, I don't understand the beginning of the video, you press for 30 seconds and you wait for the red and green lights to flash, I do it, it doesn't work, I still don't see my kso ultra displayed, help me, thank you
So when I held the reset I held it for the FULL 30 seconds. First it went red/green but then after a little longer it went just red. Then I released the button. It took about 15 sec for the red/green to flash but then 5 seconds later it went solid red.
Don't forget to clear the cache in your browser before all this.
it doesn't work when I press for 30 seconds the red and green flashes and freezes on red and green
Have you cleared the cache of the browser? Can you see it on your network when you scan for it? I use Advanced Port Scanner. It's free. And if you can see it can you ping it?
Hello, your way of doing things does not work for me, still not recognized on icriver software
Can you ping it? Can you see it on IP Scan?
tried to go to from the 618 gh overclock to the 676gh during Firmware update, it said failed, i tried again it said operation sucessfull, and to restart, I restarted, Then after waiting 15 mins or so the hashrate was 0 nothing, I tried to bring it back to the 618 firmware image_1.0 Tswift_618G_L_k0u_miner ICM168_3_2_15_ks0ultra_bg i was on that was working, but again kept saying failed , failed everytime I would try, so I tried factory reset and now the KS0 Ultra will not come back online, the lights on the back show red and green, iv tried holding them down for 20-30 seconds after plugging the power supply and ethernet, but still page loads to This site can’t be reached . I need help!
I haven't really overclocked mine but I don't think 676 is a realistic number. Is it? Idk.
Can you see it with ip scanner and if you know the ip can you ping it?
I could ping it yes , I tried everything , ended up messaging Tswift and he remote me and unbricked it , now I’m running the 676gh firmware it’s runs about 670-730gh prettt good for 230w power supply. Got shrouds , bunch of fans , but I may go back down to the 618g cuz it’s getting a little hot ,
downlaoded this Iceriver V2.0.13 i need help!!
I have done your manipulation dozens of times and it remains stuck on red and green. I am stressed. I have lost 400 euros.
Have you cleared the cache in your browser?
Also when you power down the unit to do the reset make sure it's disconnected from the Internet and power source for at least 30 seconds before plugging it back in and holding the button down for the reset.
After you do the reset and you have the network cable plugged back in does it look like it's flashing as it normally would if it was working fine?
After reset clear cashe and try ice river tool.
Mine was coming up with the ice river scan first before my advanced IP scanner found it.
Sounds like it's reversed for you.
My KS0 Ultra was Junk out of the box never worked right. It's on its second trip back to factory repair. First repair did not fix shit did not work here and that's what counts.. Iceriver is Garbage.