I personally appreciate these videos because I bought mine used and it came without instructions so it's nice that someone takes the time to make these types of videos ❤
Hello I tried to use this method, but once I wipe it, the calcium buildup is still there. Maybe I should leave the vinegar longer or I can scrub it with a steel scrub?
When I fill the water up to the max line and use either option of the steam cycle the water evaporates/ steams/ gets “cooked” before the cycle is finished and then the metal plate burns and causes it to turn black and causes the bottles to smell burnt and Smokey... why is that? I have tried adding more water, the lowest timer, using only the steam, using steam and dry. Why is it doing this?
In all honesty, it sounds like you got a defective product. Do you have the one like I show here or the advanced version of this? Have you reached out to Baby Brezza? I would recommend returning it back to where you purchased it for a new unit. Please keep us updated on how that plays out.
I washed the metal heating plate and in the sink and got as little water on the outside as possible now it won’t turn on.. did I break it 😩? Maybe just break it down and dry it thoroughly?
Oh no! It is possible a small amount of water got into the electrical through the fan opening in the inside - I would flip the base unit upside down and let it dry overnight and then try again...hopefully it works after that. Let me know!
@@candy_apple8931 I highly doubt it. Water and electronics don't go well together. My new one arrives soon and if it craps out in 2 months again, I'm requesting my money back. Sad thing is, I love their products.
You know, before this formula crisis, we had never heard about the water needing to be boiled; however, we bought purified baby water at the store for our baby. We have 2 healthy kids 3 and 7 and never boiled water…but again this was before the formula crisis.
That’s a good point - I’m trying to get the Advanced version of this and I’ll definitely be sure to do show the end result in the new video. Appreciate your input.
I’ve only been using mine for three weeks and it’s already not working, everything was going fine and now my water isn’t steaming. The water doesn’t evaporate. I also put half an hour or 45 minutes sometimes and the timer just keeps going on forever.
Sorry this happened - do you think water got into the internal system in the small hole that’s on the inside? I’d contact Baby Brezza and see if they would replace it.
Mine is a complete bust... I'm disappointed, the fan shouldn't be so close to the water. If the water boils over into the fan, the distilled water gets inside the system. Electronics and water do not mix. Mine was shot in 2 months. Baby Brezza is sending me a new one after I called and sent in the info. Cut the cord 2 inches from the base... you know what I mean if you've had this problem. 😏 I'll update on my new system coming via mail but I'm not holding my breathe. I love their products but this appears to be extremely flawed.
I’ve used mine for 5 months now and I enjoy it, don’t see how it’s a waste. It’s a sterilizer and a bottle dryer that’s it lol unless you have a malfunctioning device it’s pretty handy in my opinion.
I’m pretty sure you should separate the nipples from the rings, there a little holes in the top part that I think you would stick the nipples down inside and then maybe put the rings, onto the arms and have them hang down without the nipples inside of them
Hey there yes you would definitely do that with most bottles. These particular bottles are peculiar because the nipples are literally attached to the collars.
I personally appreciate these videos because I bought mine used and it came without instructions so it's nice that someone takes the time to make these types of videos ❤
Funny how nobody has time to read manuals anymore it's just better to come on RUclips and know everything in 2 minutes!
That's such an accurate point! Guilty as charged😆
That's exactly why I'm here. 🤣🤣🤣🤣
@@prncessbaby16 lol thats what I did too
@@chunniema21 it's so much easier than trying to decipher what those boring manuals are saying lol.
Yo the manual is trash
New dad here.. Awesome video and very informative. I got mine setup and am using it now thanks for the video! 🙏🏼
Do you need to add water each time you use the sanitize function? I saw there’s a maximum water line but Is there a minimum line?
Yup you do
How do you know what timing option to go with ?
45, 60 or 30 minutes?
I’ll stick with just 30
Thanks to share!! I accidently trow away the instructions 🤷🏻♀️😬🤣👌🏻
You are welcome!
Very good product!
good vid! only thing, in the manual it does say to use distilled water but other than that great vid.
Me: Watching this to see how to put bottles and lids in… video: “I really don’t know how to put this in. Let’s just put that there”
Glad to help 😉
So do you have to wash the bottles with soap first then put them in the sterilizer? If so might as well just wash them normally and hang em to dry.
Thought the same but i dont know if that "sterilizes" the bottles.
That's kinda how I feel too like I should just put them in the dishwasher because there's a sanitize feature on it anyways
You need to soap wash them, rinse them, sanitize them (steam) , then hang them to dry.
Does any1 know what to do if ur baby brezza leaks water during the sterilization/ drying option? Mine leaks at the bottom
Do I use distilled water or just tap water?
I use distilled because the water has too much calcium and it can mess up the water tray.
Is the baby brezza compatible with other bottles? Or do you need to use ONLY baby brezza bottles.
You can use any bottle you want with this. We used Tommee Tippee bottles. 😀
Thanks for this.
You’re welcome!
Ok someone help. Can’t find a definitive answer anywhere…do I need to WASH the bottles before I put them in here or just rinse them out?
So it’s best to wash the bottles before sterilizing. That will take any extra unseen debris out before actually sterilizing the bottles.
Can I use any kind of bottle with this sterilizer? I have the brands Avent and dr browns ?
Yes you should be able to use any bottle - plastic or glass.
@@MaddiesDaddy thanks!
Hello I tried to use this method, but once I wipe it, the calcium buildup is still there. Maybe I should leave the vinegar longer or I can scrub it with a steel scrub?
If the vinegar doesn’t work to descale it, you could probably get a descaler solution
I use the sterilization and dry after and when it's done it still wet and water dripping.The lid is fog up and with water.What am I doing wrong
Does the fan come on after the sterilization? The fan should run about 45 minutes.
Can I put the rack in the dishwasher?
I honestly don’t remember since it has been so long. Personally, I would hand wash it.
@@MaddiesDaddy OK thanks!
so..after 45 mins drying they are still wet..
Learn about the Baby Brezza Smart & Safe Bottle Warmer: ruclips.net/video/varDmBaaUts/видео.html
When I fill the water up to the max line and use either option of the steam cycle the water evaporates/ steams/ gets “cooked” before the cycle is finished and then the metal plate burns and causes it to turn black and causes the bottles to smell burnt and Smokey... why is that? I have tried adding more water, the lowest timer, using only the steam, using steam and dry. Why is it doing this?
In all honesty, it sounds like you got a defective product. Do you have the one like I show here or the advanced version of this? Have you reached out to Baby Brezza? I would recommend returning it back to where you purchased it for a new unit. Please keep us updated on how that plays out.
Happened with me too!
Same here!!! I tried returning it and got another one and kept happening! Ugh
Same here
I'm doing exactly wat the Instruction , and it's just burning up the metal part...
I washed the metal heating plate and in the sink and got as little water on the outside as possible now it won’t turn on.. did I break it 😩? Maybe just break it down and dry it thoroughly?
Oh no! It is possible a small amount of water got into the electrical through the fan opening in the inside - I would flip the base unit upside down and let it dry overnight and then try again...hopefully it works after that. Let me know!
Did it work ??
@@candy_apple8931 I highly doubt it. Water and electronics don't go well together. My new one arrives soon and if it craps out in 2 months again, I'm requesting my money back. Sad thing is, I love their products.
If I only am gonna use the dry cycle do I need water in it?
Nope - no need if that’s all you’re doing and not using the sterilization. 😀
@@MaddiesDaddy thanks 😊 I'm trying it now. Looks like its drying just fine
Great - just be sure you don’t run the sterilization without water or it could ruin the entire machine by overheating. ✌️
@@MaddiesDaddy thanks 😊 I just clean them with dawn and just don't like drying or leaving them out on a rack.
Can you sterilize anything such as pacifiers and bottle or just strictly bottles ?
Yes you can sterilize pacifiers, bottle nipples, collars, lids, breast pump stuff etc
@@MaddiesDaddy thank you!
You’re welcome
Does it only come in one size
Mine leaks. Buyer beware. It's a known silicone seal problem on many reviews. Great product until it went bad after 2 months.
I used a hospital cup to pour my water too 🤣🤣
When you add the water???!
Add the water before you run this through its cycle.
I thought for newborns, water was supposed to be boiled?? Can anyone help?
You know, before this formula crisis, we had never heard about the water needing to be boiled; however, we bought purified baby water at the store for our baby. We have 2 healthy kids 3 and 7 and never boiled water…but again this was before the formula crisis.
Wished you showed the bottles and the end result... because it looked like it didn’t dry it all the way.
That’s a good point - I’m trying to get the Advanced version of this and I’ll definitely be sure to do show the end result in the new video. Appreciate your input.
If I have this do I need the drying rack?
This has a dry feature
I’ve only been using mine for three weeks and it’s already not working, everything was going fine and now my water isn’t steaming. The water doesn’t evaporate. I also put half an hour or 45 minutes sometimes and the timer just keeps going on forever.
Sorry this happened - do you think water got into the internal system in the small hole that’s on the inside? I’d contact Baby Brezza and see if they would replace it.
What kind of filter is it
Mine is leaking, not sure what to do
You probably filled it past the max line
Mine is a complete bust... I'm disappointed, the fan shouldn't be so close to the water. If the water boils over into the fan, the distilled water gets inside the system. Electronics and water do not mix. Mine was shot in 2 months. Baby Brezza is sending me a new one after I called and sent in the info. Cut the cord 2 inches from the base... you know what I mean if you've had this problem. 😏 I'll update on my new system coming via mail but I'm not holding my breathe. I love their products but this appears to be extremely flawed.
I just got one hopefully it will work good I heard that it happens a lot where it suddenly stops working ☹️
If you 😂 already play ratchet and clank in ps5 you’re gonna Find the Joke
It appears that the front bottle did not dry properly. You might need to rotate the bottles once or twice during drying.
Dose it need to be distilled water or regular watwe ?
Distilled
I though it was faster than 45 min at that point I will use my dishwasher I guess
You can set it to a lower time - 45 is the longest
Make sure you use distilled water or it’ll ruin your machine.
wattage please?
After a month of owning this and using it daily I'll say this.. ..... it's a waste.
How come? How do you sterilize your bottles now?
@@saradowdi8938 probably the dishwasher
I’ve used mine for 5 months now and I enjoy it, don’t see how it’s a waste. It’s a sterilizer and a bottle dryer that’s it lol unless you have a malfunctioning device it’s pretty handy in my opinion.
Dude wtf. You didn't use the product before trying to make an instructional video?
He did a great job.
Thank you
I’m pretty sure you should separate the nipples from the rings, there a little holes in the top part that I think you would stick the nipples down inside and then maybe put the rings, onto the arms and have them hang down without the nipples inside of them
Hey there yes you would definitely do that with most bottles. These particular bottles are peculiar because the nipples are literally attached to the collars.