Microair EasyStart Bluetooth Android iPhone App Install
HTML-код
- Опубликовано: 17 окт 2024
- We have updated the installation video for the Bluetooth EasyStart 364 to include new steps to syncing your phone to the EasyStart.
The All New Micro-Air Bluetooth EasyStart 364 is the smartest version yet! At startup your air conditioner is a POWER HOG 🐷!! From your smartphone, watch the Bluetooth EasyStart transform and gently “soft start” your RV’s air conditioner with ease. See real-time before & after results! Pull into an RV park with low voltage or dangerous electrical? The Bluetooth EasyStart also monitors power quality & protects your ac’s compressor from damage.
I installed mine yesterday 07/04/2023. It is the Bluetooth 368. All I did was download the app, and it connected without any passwords/ID numbers etc, or other questions. I just opened app and selected connect. that was it. The instructions are not clear, but it seems they improved it over what they used to have to do. Very happy.
Thanks. I bought the Flex model. I will install it as soon as I receive my install. Kit. It would have been nice if the kit came with the unit. Or if Micro-Air offered it at the time I bought the flex unit.
My android phone could not pair automatically and asked for a PIN. Turns out on some Android phones you goto Settings/Location/App Permissions and make sure EasyStart is "Allowed only while in use". The Bluetooth ID shows up when your phone scans for Bluetooth Devices and should be something like "EasyStart_AB1F" where the last 4 digits are unique to your device. Most of the time if your settings are correct the app may enter your ID automatically otherwise you can enter it. MicroAir needs to update their instructions on how to connect Bluetooth.
Your comment really helped me solve the same problem you described above. Thanks so much for a much clearer explanation!
Not explicitly stated anywhere that I could find.. A/C unit must the on and running for the bluetooth to connect, there is no bluetooth (or anything) when the A/C unit is not running. The 368-x72 brought my peak amps from 51.7 down to 32. Was hoping for more, but time will tell.
I have two of these and love them. Getting the Bluetooth version from Hutch Mountain is the way to go. One question, I’ve heard reports you should re-learn your EasyStart during really hot weather. Is that true?
I have an easy start on my 3 ton home AC it works great starts at less than 18 amps most times. My Generac whole house generator doesn't even know the AC comes on. My question is when the app shows a fault is there a way to determine what the fault was. We had a large storm last night and the utility power was flashing low voltage off and on a few times while the AC was operating. It did shut the AC DOWN for the three minute delay. By them the power stabilized and it had a normal restart possibly saving the system. It did set a fault code. I'm just curious if thers a way to see what the actual fault was. It's not important I'm just an inquisitive pearson.
By the way great product I highly recommend it for any home AC weather you have a backup generator or not!
Thanks for the video. I wish I had seen it BEFORE I configured my EasyStart after installing it. The app permissions tripped me up. I don't know if the EasyStart kit was setup by Micro-Air or by Hutch Mountain, but it was almost plug and play. I had to make one cut (to two wires at the same time) instead of the multiple wire cuts I was expecting.
Planning on buying 2 units for 2 acs and watched your video. Do the ends now all come with connectors?
*Just received my 368-X72. White & Brown wires have superb WAGO 221 Standard connectors. Orange & Black wires are terminated in 1/4" spade females.*
All installed but having issues on the app. It keeps saying Easy Start not found. Its all green, I did my 7 tests and now sitting in living room and nada. Do I have to be right on the unit to pick up??
Thank You for your excellent videos. I just finished install and learning, all went super well 👍🏻. What is the update setting for in the app?
I just installed my EasyStart, and for whatever reason the peak amps has not gone down, but went up. I have a 5 ton unit, and it went from 63 amps (not sure how that happens when I have a 50 amp breaker switch (double pole since it’s 220 volts), to 67.4 peak amps. Did not go down at all. Am I doing something wrong?
Bruh a 5 ton unit usually needs 150+ amps to start. 63amps ain't bad
Getting ready to install EasyStart 368 on home AC and this is very helpful especially the app program where you go into relearn and show how to change settings. In my case I need to change No pwr on delay to ON and change SCPT to 1 per Microair due to fact that my system already has compressor monitoring module. Thanks
Have you done the conversion for the 3500 from Harbor freight to LP gas?
My unit didn't come with the Bluetooth ID but it is marked as ASY-368-X48-BLUE. Is there another way to get the Bluetooth ID?
I haven't even had my second cup of coffee and I was 11.5 minittes into the video
Well done. Going throught the process now. You are intuitive and your attention to detail is excellent. When I do a review of my dirtbike race setup with my 18' Wolfpup, you will get kudos.
What is the minimum W inverter to start the A/C with the Micro Air ? I have a 1000 W Inverter :-0)
On the one I got I never got the qrcode or the Bluetooth number code
Hello, mine didn't come with the codes, either. Do u ever got it connected?
I'm thinking about getting one of these for my Dometic Brisk Air II. 13.5K BTU.
It stay on last peak you only see the new when it hits them it goes back to last peak
Oops wasn't finished I was not finished I couldn't find my sticker anywhere have had it for a couple of weeks and the weather extremely Hot .well after find this I got the paperwork and nothing there guess I have to call them has anyone had this happen to them.🤔
Make sure to NOT update the software. It will BRICK the unit.