2015 Silverado 2500HD Gets A 5” Lift, 20x10’s, and 35’s!

On this week’s Spotlight, we give a 2015 Silverado 2500HD a NEW LOOK with a 5” Zone Lift Kit, 20x10 -25 ARKON OFF-ROAD Lincoln’s, and 35x12.5R20 Fuel Mud Grippers! CHECK IT OUT!
ARKON OFF-ROAD Lincoln (Black Milled) 20x10 -25 & Fuel Mud Gripper 35x12.5R20
bit.ly/2tg1Cea
Check out this 5” Zone Lift Kit for your ‘11-19 Silverado 2500HD
bit.ly/2SKq0mn
Check out all Lift Kits Here:
bit.ly/2wsM73C
View this truck in our Gallery!
bit.ly/2GEshsX
Subscribe now to stay up to date on all videos coming out from Custom Offsets!
goo.gl/P71pkN
Do 20x10 -25 wheels with 35"x12.5" tires fit on a 2015 Chevrolet Silverado 2500 HD 4WD Zone Suspension Lift 5"?
Yes it does! This 2015 Chevrolet Silverado 2500 HD 4WD is running ARKON OFF-ROAD Lincoln 20x10 -25 wheels Fuel Mud Gripper 35"x12.5" tires with Zone Suspension Lift 5" suspension, needs Minor Plastic Trimming and has No rubbing or scrubbing. As you can see from the pics this wheel and tire combo can be done!** With this year/make/model, the stance is Slightly Aggressive. Also remember spacers impact fitment, this ride is running None in front and None in rear.

[@1duramaxhd]

Love how y’all made that look so hard with the camera work. 1 man 7 hour job. Thanks

[@croomrider9785]

A lot of rust on the bottom of the truck, thank god I live in Florida and my truck never sees snow or salt! Great build!

[@JeremySchoeder]

It's a Chevy thing. Wax coated frames and all that. They need to step up their game.
forums.edmunds.com/discussion/9900/chevrolet/silverado-1500/chevy-silverado-and-gmc-sierra-undercarriage-rust/p9

[@croomrider9785]

Jeremy Schoeder thankfully I live in Florida and my truck has no rust, if I see surface rust I rake care of it right away.

[@HardNorthOutdoors]

will the stock 18: wheels fit with 1.5" or 2" wheel spacers?

[@jasensweeney486]

This is an absolute dream job for me. Only 1 question... how tf would you get this job, like idk if there is a school that teaches you to put on lifts. Is it on the job training?

[@CustomOffsetsTV]

For the most part yes it is on the job training and all of our installers are trained professionals!

[@chrislewis9345]

Do you have a video of installation of rough country forged upper control arms on a 2016 GMC Sierra?

[@CustomOffsetsTV]

We do not have an installation video yet. Possibly in the future though we will have one most likely.

[@5.0FP700]

Nice 2015 rust bucket u lifted

[@stephenengberg2095]

Dude I just seen wheels I want and tire size once I get my truck

[@KBear2424]

So besides the obvious 1/2” difference is this pretty comparable to the BDS 4.5 “ lift kit??? Looks great btw. Also do y’all have any King shock packages ?

[@CustomOffsetsTV]

Its pretty close to the same size. And check out our Superlift kits here!
bit.ly/2HJJOyL

[@tharealest2365]

How long did this take to assemble? Nice work btw 👍🏼

[@CustomOffsetsTV]

10-12 hours roughly

[@hunthedeer]

Okay I have 2015 2500 on a pro comp 5 inch lift and when I turn it rubs the bumper, did you do any trimming on the bumper?

[@CustomOffsetsTV]

You could trim the bumper yes! If you are looking for us to do it, email [e-mail] and we can schedule an appointment!

[@lifted9821]

Funny I have 35s stock no trimming no lift on a 2015 dmax just 11.5 wides though

[@jdkirane7990]

All about the offset of the wheels and width of the tires. Stock wheels and narrower tires fit all day

[@jasonshutske3346]

I have 35s by 11.5 wides on my stock 2012 Duramax and they rub bad. need to do the norcal for sure but im also rubbing on the frame...

[@jdkirane7990]

@@jasonshutske3346 The negative offset helps with getting away from rubbing on the frame but then you get to rubbing on the fenders if you have too much negative offset

[@lifted9821]

@@jasonshutske3346 ya the 2011 trucks had a small fender then the newer trucks hopefully the fender opening get bigger with the next gen trucks

[@colt._45]

Wheel wells on the chevys are terrible.

[@r.cic1596]

Faaack that looks good

[@jasonshutske3346]

my 2012 Silverado 2500hd is rubbing on the frame...is the only way to stop this to offset the wheels?

[@briansmith4399]

spacers

[@yosuifalanzi624]

I have the same truck do i need to re gear the diff? For the 35s

[@CustomOffsetsTV]

Not a bad idea but definitely not a requirement

[@derrikderock5506]

What's the music you use during both the build scene and the reveal?

[@CustomOffsetsTV]

Its all in-house made music

[@derrikderock5506]

@@CustomOffsetsTV damn. I like listening to it while I work on my truck but it's a pain to keep rewinding the video when it ends 🤣

[@tommypearson9260]

This looks like the New Ateam building a battle Vehicle😂😂😂😂😂😂

[@mauriciobencomo4706]

Just outa curiosity would all of this fit 07 chevy silverado 1500 LT?

[@CustomOffsetsTV]

You would need to get the required lift for the vehicle but yes you could do a 5" lift, 20x10, and 35s

[@zaccariasippidabarbercollins]

I got the same Truck and I’m located in Mississippi. If I came up and want the same done with possible different rims to where I still can haul and possibly some mud riding. Are y’all still doing business and how long wld I need to stick around?

[@CustomOffsetsTV]

Shoot us an email to [e-mail] nd we can help with this!

[@billybeast3814]

Does anyone know if there are any rub issues with 35's on that truck and lift, either 5in or 6in?

[@CustomOffsetsTV]

Did need some minor plastic trimming

[@Loganbarrie27]

I wanna see more dodge builds

[@stephenengberg2095]

Maybe 37’s

[@roblou4928]

TORCH???😮

[@hedgehogplayersdavis3853]

on RUclips look up off road runer

[@codybersicc7939]

*imagine having those dirty pants sitting in a customer's truck*

[@ryker1725]

The Real Cody Bersick don’t be rude

[@gallardo360]

Look at all the rust , and on a 2015 , wtf

[@CustomOffsetsTV]

Welcome to Wisconsin🧀

[@austinthegamer55]

4

[@braxtonwopsock801]

I had a 6' zone on my truck and the first time I took it off road the Kunkle broke so now I'm looking for a new lift kit

[@king_phil_dogking_phil_dog6296]

First :D

[@clancyslater7869]

Third😂😂