Here's a few more tricks: 1. You can use an expression pedal as a foot switch. One thing I do is I can "swell" in the gain on an overdrive block as it turns on. 2. Command center. I have one button mapped to long/short press to switch between snapshots. Another switch is mapped to switching to another specific preset.
I somehow JUST discovered that not long ago. You can assign a bypass function to an expression pedal, selecting at what point it flips over, and even can set a time delay once it passes that point. That definitely opens up a lot of interesting possibilities - a rotary effect with chorus or other modulation as the speed ramps up maybe.
I bought a small stomp to build a board for p&w around. In the time it took to arrive in the mail I found a local stomp XL and tried it out. I’ve found it to be the perfect size and layout for my needs. I run 2 ODs into it and a delay and reverb in the FX loop and a volume pedal in front of it all. Super small rig but enough buttons to activate everything I need.
I use the Stomp for my all around rig for CCM stuff; for greater ease of use, I use an external tuner, dual external footswitches and use snapshot up (command center) as 1 button to use the others as bypass effects
Just saw this and I agree. Most folks will never need all the power of a full on Helix. You could actually run 2 guitars and a bass through it, but at that point, I'd just get each person a Stomp XL. Most folks have clean, OD and lead sounds with effects peppered in each one. The amount of processing power needed for most of that has been surpassed. Boss also use their own processor which I think is more powerful than the SHARC, because the same one is in GT-1000 and the GT-1000 core. It'd be crazy if they put two of those in a rack mount unit.
Excellent, insightful, and useful tips as always. Thanks I'm using the regular HX Stomp, and on a few Presets, I've assigned 2 Blocks to the same footswitch so they will alternately swap which Block is on. Is there a way to additionally turn on/off "both" Blocks using the same footswitch? I'd like to have all these options on the same foot switch if possible: 1. Block A on 2. Block B on 3. Blocks A and B on 4. Blocks A and B off
I've actually tried this too but it's impossible within a single preset with the bypass function. However if one of those blocks has a mix or intensity control, you can set up a parameter adjustment to go from minimum (ass if the effect were bypassed) to the desired amount (the effect can be heard now) and it'll achieve the same thing.
One of my favorites! Combining footswitches and snapshots on the Stomp XL is easy since you can do it in global settings. ruclips.net/video/A0gReHM3pnE/видео.html On the original Stomp, you have to go to Command Center to do this.
Добрый день, Alex! Вы не могли бы подсказать, - вот пришла мне новая бас-гитара Squier Affinity Series Precision Bass PJ Laurel Fingerboard с интернет-магазина, - красивая и внешне качественная, НО - довольно сильно фонит! Прикоснёшься рукой к крутилкам или к струнам, сразу тишина, убираешь пальцы, сразу высокочастотный фон! Дело не в шнуре, и не в усилителе, так как менял по всякому, не помогает. При игре стоит шорох и раздаются щелчки от прикосновения к струнам.. Такая картина - это же ненормально? Гитара стоит 400 долларов.. Или же и другие гитары, подороже, также создают фон!? И можно ли что то теперь сделать с этим? Очень жаль отправлять обратно в магазин эту гитару...
I’ve considered it, but I like leaving that to level presets. It’s there and available on every preset then and not locked to a parameter adjustment value. Also I prefer the volume pre-wet effects
I have another question for you. I've bought a new more portable laptop with windows 11 pro installed on it. I'd like to use HX edit with the new computer. Do you know how I can migrate all my HXstompXL settings over to my new computer? Also, does HX Edit play nice with windows 11?
Hey Dan - should be seamless. HX Edit only exists to communicate with your device. Everything that's already on your Stomp XL should show up when you connect to your new computer and install HX Edit.
i wonder if Line 6 new that the Helix line would be hijacked by us worship leaders... every time i view a youtube about it its always someone using it for worship... HAHAHA love it. it also could be that were the only ones still using music gear anymore seems like guitars are a thing of the past with this new generation.
its a gig every week for some great audiences. Many singers cut their teeth on gospel and choir ! Many young people are encouraged and inspired by watching Worship leaders around the world. Kudos keep on keeping on!
![Tee Grizzley - Robbery 8 [Official Video]](http://i.ytimg.com/vi/34_vkNV6wrU/mqdefault.jpg)
HX Stomp Accessory guide - www.alexpricemusician.com/hx-stomp-accessories
My Helix presets (paid & free) - www.alexpricemusician.com/helix
Buy the Line 6 Helix & HX Stomp at zZounds - bit.ly/3Bo5n5k
You are a delightfully clever human being. Thanks for the tips!
Here's a few more tricks:
1. You can use an expression pedal as a foot switch. One thing I do is I can "swell" in the gain on an overdrive block as it turns on.
2. Command center. I have one button mapped to long/short press to switch between snapshots. Another switch is mapped to switching to another specific preset.
I somehow JUST discovered that not long ago. You can assign a bypass function to an expression pedal, selecting at what point it flips over, and even can set a time delay once it passes that point. That definitely opens up a lot of interesting possibilities - a rotary effect with chorus or other modulation as the speed ramps up maybe.
Helpful as always. Thanks Alex.
I bought a small stomp to build a board for p&w around. In the time it took to arrive in the mail I found a local stomp XL and tried it out. I’ve found it to be the perfect size and layout for my needs. I run 2 ODs into it and a delay and reverb in the FX loop and a volume pedal in front of it all. Super small rig but enough buttons to activate everything I need.
The Stomp XL is pretty great 👍🏼 awesome to hear
I use the Stomp for my all around rig for CCM stuff; for greater ease of use, I use an external tuner, dual external footswitches and use snapshot up (command center) as 1 button to use the others as bypass effects
great tutorial, thanks man!!
Great video, great info. Thanks!
Thank you so much for these great tips!!
Just saw this and I agree. Most folks will never need all the power of a full on Helix. You could actually run 2 guitars and a bass through it, but at that point, I'd just get each person a Stomp XL. Most folks have clean, OD and lead sounds with effects peppered in each one. The amount of processing power needed for most of that has been surpassed. Boss also use their own processor which I think is more powerful than the SHARC, because the same one is in GT-1000 and the GT-1000 core. It'd be crazy if they put two of those in a rack mount unit.
Good stuff, definitely going to try a couple of these!
Great video Alex!
Thanks for actually playing the guitar so we can hear the changes you're making on screen. That helps a lot!
Fantastic info!
This is the sound I’ve been trying to get on my delay, what are the settings you are using ? Cabinets etc? I would appreciate your help. Gracias
I wanna see the pedal board build video!
Stomp XL pedalboard:
ruclips.net/video/UQyEbLsJk2k/видео.html
Regular HX Stomp board:
ruclips.net/video/hSx_bYHlids/видео.html
Excellent, insightful, and useful tips as always. Thanks
I'm using the regular HX Stomp, and on a few Presets, I've assigned 2 Blocks to the same footswitch so they will alternately swap which Block is on. Is there a way to additionally turn on/off "both" Blocks using the same footswitch?
I'd like to have all these options on the same foot switch if possible:
1. Block A on
2. Block B on
3. Blocks A and B on
4. Blocks A and B off
I've actually tried this too but it's impossible within a single preset with the bypass function. However if one of those blocks has a mix or intensity control, you can set up a parameter adjustment to go from minimum (ass if the effect were bypassed) to the desired amount (the effect can be heard now) and it'll achieve the same thing.
@@AlexPriceMusician Thanks for the reply and your insights. It is something for me to consider as a solution.
Have you already plugged in a mandolin??
You could use the command center to make a hybrid rig, with a switch to snap up and one to snap down, and set the others to stomp... just another idea
One of my favorites! Combining footswitches and snapshots on the Stomp XL is easy since you can do it in global settings. ruclips.net/video/A0gReHM3pnE/видео.html
On the original Stomp, you have to go to Command Center to do this.
Whats the pedal with the red button?
Добрый день, Alex! Вы не могли бы подсказать, - вот пришла мне новая бас-гитара Squier Affinity Series Precision Bass PJ Laurel Fingerboard с интернет-магазина, - красивая и внешне качественная, НО - довольно сильно фонит! Прикоснёшься рукой к крутилкам или к струнам, сразу тишина, убираешь пальцы, сразу высокочастотный фон! Дело не в шнуре, и не в усилителе, так как менял по всякому, не помогает. При игре стоит шорох и раздаются щелчки от прикосновения к струнам.. Такая картина - это же ненормально? Гитара стоит 400 долларов.. Или же и другие гитары, подороже, также создают фон!? И можно ли что то теперь сделать с этим? Очень жаль отправлять обратно в магазин эту гитару...
Use the output to assign your volume pedal to it. Takes No blocks and it's right at the end of your chain
I’ve considered it, but I like leaving that to level presets. It’s there and available on every preset then and not locked to a parameter adjustment value. Also I prefer the volume pre-wet effects
How can I assign abcd for snapshot?
I have another question for you. I've bought a new more portable laptop with windows 11 pro installed on it. I'd like to use HX edit with the new computer. Do you know how I can migrate all my HXstompXL settings over to my new computer? Also, does HX Edit play nice with windows 11?
Hey Dan - should be seamless. HX Edit only exists to communicate with your device. Everything that's already on your Stomp XL should show up when you connect to your new computer and install HX Edit.
@@AlexPriceMusician thanks again, brotha. It works great
There's no cab on presets??
I usually use the combo amp+cab blocks, that's why you're only seeing one red block. If you look close it says A+C
Why not show how to do this with out the on line and on the xl it self?
I mean it’s the same concept - that would’ve just made the video needlessly long. Which part in particular?
i wonder if Line 6 new that the Helix line would be hijacked by us worship leaders... every time i view a youtube about it its always someone using it for worship... HAHAHA love it. it also could be that were the only ones still using music gear anymore seems like guitars are a thing of the past with this new generation.
its a gig every week for some great audiences. Many singers cut their teeth on gospel and choir ! Many young people are encouraged and inspired by watching Worship leaders around the world. Kudos keep on keeping on!
It's a Godly piece of kit😂