@@JVFIXLLC however my 2 new keys work then my original doesnt. Then i redo to process and the original works and 1 new key work. The second new key doesnt work. For me only 2 keys can work
Thanks for the video, FYI today I did a 2019 Ford Transit, all the procedure were the same except instead of 4 times needed 8 times to go through programming mode, even IM608 says 4 times.
Pretty good video definitely helped us out. except when we programmed our new key, it unprogrammed our other two keys lol so now we’re trying the whole process over again.
@@JVFIXLLC yeah my mistake was not pushing the buttons on the other fobs. Each one needs to be pressed when reprogramming. And on this model for some reason I couldn’t use the Autel so I tried going on and off more than four times, somewhere between five and eight and then it worked. Got them all working though. Thanks for the knowledge!
Question. I have a key fob for my 2019 transit 150 it's already been cut, do I need scanner to program the key fob? Or I can just turd the key in and turn it until I hear beep. Thanks in advance
I've got 2 new transponder chips for a 2008 mk 7 transit and I need to programme my spare key up for my 2016 mk8 transit custom. Is it the same transponder chip for both vehicles...is the transponder chip off a mk7 transit the same asa mk8 transit custom...if anyone could help...thanks
@@JVFIXLLC they can scan the tracker also some one found the tracker only where the van was. The thing is the police didn't bother to come when my neighbour call them while witnessed the man stealing the van... all they said was ref no .and to call the insurance. .
Helped for me withoit a scanner. Turned the key 4 times and pressed a button on the key fob and it worked. Thank you
no problem
@@JVFIXLLC however my 2 new keys work then my original doesnt. Then i redo to process and the original works and 1 new key work. The second new key doesnt work. For me only 2 keys can work
Thanks for the video, FYI today I did a 2019 Ford Transit, all the procedure were the same except instead of 4 times needed 8 times to go through programming mode, even IM608 says 4 times.
yea ford all ford to program key fob is 8 times. thanks for visiting
Very helpful info. Appreciate u
no problem, thanks for checking out the video
Pretty good video definitely helped us out. except when we programmed our new key, it unprogrammed our other two keys lol so now we’re trying the whole process over again.
yea on most cars will require all fobs present to be programed at once. thanks for watching
@@JVFIXLLC yeah my mistake was not pushing the buttons on the other fobs. Each one needs to be pressed when reprogramming. And on this model for some reason I couldn’t use the Autel so I tried going on and off more than four times, somewhere between five and eight and then it worked. Got them all working though. Thanks for the knowledge!
Works with out scanner, thank you!
no problem
Question. I have a key fob for my 2019 transit 150 it's already been cut, do I need scanner to program the key fob? Or I can just turd the key in and turn it until I hear beep. Thanks in advance
Yes you can do the manual procedure opening the switch eight times quick
I've got 2 new transponder chips for a 2008 mk 7 transit and I need to programme my spare key up for my 2016 mk8 transit custom. Is it the same transponder chip for both vehicles...is the transponder chip off a mk7 transit the same asa mk8 transit custom...if anyone could help...thanks
the chips are not the same you need to buy the right ones for the 2016
Thank you
thanks for watching
Thank u
thanks for watching
👍
This is how my van has been stolen!!!!!!
and that's why i put a tracker on my cars
@@JVFIXLLC they can scan the tracker also some one found the tracker only where the van was.
The thing is the police didn't bother to come when my neighbour call them while witnessed the man stealing the van... all they said was ref no .and to call the insurance. .