Resin artist here! First, make sure you work in a well-ventilated area. Second, please wear gloves. 0:36 - the purple stuff is a diy silicone mold. I do not recommend pouring resin that deep without layering. It will get super hot and may not cure. 1:01 - not all resins will be in that state after just one hour. Some will be completely hardened and some will still be fully liquid. And please wear gloves when handling resin that isn’t fully cured. 1:29 - any food with a high moisture content will rot. I Don’t recommend putting food of any kind in resin, but definitely not anything with moisture. This advice extends to the next craft also. 2:03 - I have no idea how well that would de-mold. Pringles cans have cardboard inside, i think if you somehow managed to get it out it would be covered in cardboard. Resin sticks to everything but silicone and certain plastics. You can buy silicone molds in the shape of a cylinder like that and just put your chips in there. Chips are dry, so it should be alright. 2:16 - drying the fruit should be fine. I Don’t know how to dry fruit, so I don’t know if they did it right, but if you’re able this should work fine. 2:38 - make sure the surface you do this on will detach from your resin. 3:14 - if you want this table to remain level, make sure you have the exact same length of resin for each leg. 3:23 - unsure if resin will detach from playdoh. You could do the diy silicone mold for this to ensure it works. 3:44 - they didn’t tell you this, but that was UV resin. The purple glow was the UV lamp to cure it. You can paint on resin, I would recommend a layer at the very bottom also and a final layer on top. 4:21 - they used alcohol ink, but a very similar effect would be achieved with mica powder. 4:47 - we don’t see them seal the bottom. Also, the resin may not de-mold cleanly. 5:08 - I Don’t know why you would want to do this, but do it in layers with silicone bowls. 5:54 - no. I would refrain from using resin with food. I’m sure you could find food-safe resin, but be careful regardless. 6:15 - I have no idea how they thought that would cure. The resin will drip to the bottom because epoxy resin takes longer to cure. It may work with UV resin. 7:00 - that looks like a real flower. It will die. 7:15 - that was UV resin. I have never seen resin break like that. 7:32 - just buy a chessboard mold. That is unnecessarily difficult. 7:54 - more diy silicone! Please cure your resin in layers. 8:31 - you can keep bubbles from forming under the flowers by first dipping them in your mixed resin. 9:04 - they used alcohol ink. 9:25 - depending on the plastic, this won’t even detach. You could do the diy silicone thing again. 9:48 - that’s gold foil! 10:21 - hot glue should work. Or you could make your own silicone mold, like a normal person. 10:45 - that… was not Resin. 10:53 - WHERE are your GLOVES? 11:20 - that must stay in the plastic. That will not demold. 11:32 - those dyes in the candies will bleed. 12:22 - they make resin tape that will definitely peel off and serve the same purpose. Do this on a silicone mat. 13:38 - please wear a respirator if you sand resin. 14:23 - hm….. I hope this helped you in some way!
Is there anyone who always watches but never tries😂just like me 😚
Yes, I am.
Me also
Me!
Ya meee😀😀
Yeah me 😃
Nice🌺🌺🌺🌺🌺
XXXXXXXXXXXXXX
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx no never no never m a n g o mango
SANAHABEGUM Sneha
@NO9Relax
뭔가 편안해지는 영상이네요. 힐링하고 갑니다^^
qi aaz
That is so beautiful 😍
Просто суперски
Yessssssss
J'adore c'est telement beau je n'ai pas les mots😊
Very nice
Vos vidéos sont incroyables vous avez beaucoup de talents. Continuer de poster des vidéos comme toutes les autres 💖💖💖
Good
Great 🙂🙂
wow! I like it!!!😶😶😶😶
It's really wonderful 👍 keepsmile 🤩😍😍🥰
КРУТО КОГДА ВЫ НА УЧИЛИСЬ В ДЕНЬ .
I love the calender the most ❤❤❤❤❤❤
And lots of love and appreciation from India 🇮🇳
I love Canada ❤❤❤
İt is very good ideas. I like 5- minute crafts. Thank you for it videos❤️❤️❤️❤️❤️❤️❤️❤️❤️. Amazing 🥰
I like
Lots of love from pakistan 🇵🇰
Good👍💖💖💖😍😍😍👌👌👌
Cool thanks
beautiful
Helloo🥰🥰
WAW 🎉🎉🎉🎉🎉😊😊😊😊😊❤❤❤❤❤❤
Wow Amazing
Shout out in next video please
Rsvjg
ၾည
The baloon hack was just amazing
WOW 😲😲😲😳😳😲😳😲😳
Todo muy lindo me encantó
Very good👍👌
Gente eu amo essas peças com resina 🥳🙈♥️
😢😮😢😊
You know it's amazing how you find the art in every thing and how you turn it in to something beautiful!
ো
l from Uzbekistan ❤❤❤
非常好的创意
So beautiful and pretty
Perfect
Hi
LUANA MARINHO E A GENTE NÃO PODE SER O MELHOR QUE 💗💗💗✌✌✌✌
The pepperoni earring was too much
I love your craft ideas 💡 it's nice 👍
First ☝☝☝
💜Hello I'm Roshni BTS Army 💜
Wow ❤️❤️❤️❤️❤️❤
I like it❤❤❤❤❤❤❤❤❤❤❤❤❤
I love these videos there so relaxing😴
Me too bro
hi
Same
I really love these. They're so cool and satisfying to watch
So nice 😍😍😍😍😍😍😍😍😘😘😘😘😗😗😗😗
Super ,💯💯💯💯💯💯
ładne 😀
Wow, wow, wow so beautiful I like you so cute video
R8🐵
Yes ofcourse
Vos créations sont très magnifique
👍 tq
First☝☝
Uzbekistondan ham muhlislar bor
9:39 is so aesthetic!!!💜⚪💜
do you know where to but resin
hebat 😍😍😘
Super super super👌👌👌👌
hello i'm happy to make special tricks of you guys thank you so much for everything thank you
hallo
where do i btu resin
Hello that liquid name please🙏
mi like
class!😍 Very beautiful!🤩👍👍👍
Epoxy is so expensive 😭😭😭
उग्जो
Wow the hacks are amazing😍😍😍
First
I was first
Wow
💜💜💥💥👍👍
Resin artist here! First, make sure you work in a well-ventilated area. Second, please wear gloves.
0:36 - the purple stuff is a diy silicone mold. I do not recommend pouring resin that deep without layering. It will get super hot and may not cure.
1:01 - not all resins will be in that state after just one hour. Some will be completely hardened and some will still be fully liquid. And please wear gloves when handling resin that isn’t fully cured.
1:29 - any food with a high moisture content will rot. I Don’t recommend putting food of any kind in resin, but definitely not anything with moisture. This advice extends to the next craft also.
2:03 - I have no idea how well that would de-mold. Pringles cans have cardboard inside, i think if you somehow managed to get it out it would be covered in cardboard. Resin sticks to everything but silicone and certain plastics. You can buy silicone molds in the shape of a cylinder like that and just put your chips in there. Chips are dry, so it should be alright.
2:16 - drying the fruit should be fine. I Don’t know how to dry fruit, so I don’t know if they did it right, but if you’re able this should work fine.
2:38 - make sure the surface you do this on will detach from your resin.
3:14 - if you want this table to remain level, make sure you have the exact same length of resin for each leg.
3:23 - unsure if resin will detach from playdoh. You could do the diy silicone mold for this to ensure it works.
3:44 - they didn’t tell you this, but that was UV resin. The purple glow was the UV lamp to cure it. You can paint on resin, I would recommend a layer at the very bottom also and a final layer on top.
4:21 - they used alcohol ink, but a very similar effect would be achieved with mica powder.
4:47 - we don’t see them seal the bottom. Also, the resin may not de-mold cleanly.
5:08 - I Don’t know why you would want to do this, but do it in layers with silicone bowls.
5:54 - no. I would refrain from using resin with food. I’m sure you could find food-safe resin, but be careful regardless.
6:15 - I have no idea how they thought that would cure. The resin will drip to the bottom because epoxy resin takes longer to cure. It may work with UV resin.
7:00 - that looks like a real flower. It will die.
7:15 - that was UV resin. I have never seen resin break like that.
7:32 - just buy a chessboard mold. That is unnecessarily difficult.
7:54 - more diy silicone! Please cure your resin in layers.
8:31 - you can keep bubbles from forming under the flowers by first dipping them in your mixed resin.
9:04 - they used alcohol ink.
9:25 - depending on the plastic, this won’t even detach. You could do the diy silicone thing again.
9:48 - that’s gold foil!
10:21 - hot glue should work. Or you could make your own silicone mold, like a normal person.
10:45 - that… was not Resin.
10:53 - WHERE are your GLOVES?
11:20 - that must stay in the plastic. That will not demold.
11:32 - those dyes in the candies will bleed.
12:22 - they make resin tape that will definitely peel off and serve the same purpose. Do this on a silicone mat.
13:38 - please wear a respirator if you sand resin.
14:23 - hm…..
I hope this helped you in some way!
Soooooo nice and beautifull
Wow, it's really good, I like this video, I'm excited for those who make content
Love it!!
super and beautful
Very Useful ideas
Y glue h ya kch or jisse sbkch bn rha h 🤔
No 😲😲🤣 i am so impressed with your dialogue i have tried it
first one
5 minutes craft is awesome 👌
Nice sister
Wow amazing 😻
wow i have try all earings
😲
hi
Apki video is very nice
감동적인 영상
Ye kya h isme water jaisa phevikuik kya jaldi ans please
0:59 it say 5minutecrafts but he hav to wait 1hour 😂
Noooo 😭 not the Pringles 😭
❤❤❤
This is very amazing....... I like this video
This videos is so good
Wao😮😮😮😮😮😮
Best ideas
How does a heel just break? When ur walking like that it doesn't just happen. I will say that resign heels look cool , but it doesn't seem very secure
Very cool nice 👌👌🤘
I 💕💕💕💕💖💖💖💖💓💓💓💓💞💞💞💞💗💗💗💗 3d pen and glue
I love this bgm...❤️😍
What is the title of the music background in the first place?🥺
wow i want kly😵
Super
Sen Türkmüsün?
Hi
Hi
Yes
Nice
Which liquid is used during this procedure????
Which ingredients you will be use
Epoxy resin,glitter,dried flowers,mold
Amazing
Reply to this comment if you love 5 minute crafts but hate how they almost always repeat what they’ve already done.
Claro que si me encantan las manualidades lo malo es que siempre repiten varias cosas
Boa noite, gostaria de saber o nome do líquido?
Di glue kaun sa rahta h
Nice, 🥰
Your amazing