Hi.Please answerme if this inverter work with 16 S 48v , 320 Ah lifeph4 battery? What comunication protocol have it ,in work with battery ?Anern company seller can,t answer me!! HELP me please
I had a bad experience with the 8,2kW inverter. It broke down after one day of operation at low charge. I had to buy a new 400 dollar power board that broke down after one week of operation. Anern did not meet his warranty obligations and I had to buy an inverter of another brand. I lost à 1000 dollar and hope that Anern will one day deliver me a new and good working inverter. So BE CAREFUL when purchasing Anern material
not anymore, I also tried to purchase motherboard from the seller and the seller said the cost will be like buying a brand new inverter, this inverter is a total waste of money.
@minimizeyourgrid Hi once again, my previous question is already answered by reading the comments here. Is the PowMr working fine so far? And sorry I am newbie, could you please tell how the transfer switch is working? Does he switch to the main grid automatically, when the Inverter switch off and back if the Inverter turns on? Is there a special control connection between transfer switch and inverter or is there a prefered Input (from inverter) at the transfer switch, so he acts automatically? Does the Inverter never feed into grid, only consume from it as suplement when needed? Sorry for all the questions, i hope you'll find some time to answer me. Greetings from Thailand
@@topeye4202 Let me answer to the best of my knowledge... regarding your question "Does he switch to the main grid automatically, when the Inverter switch off and back if the Inverter turns on?" yes it does and also when overload occurs in battery mode. "Is there a special control connection between transfer switch and inverter or is there a preferred Input (from inverter) at the transfer switch, so he acts automatically? " ...There is no need special control or signal, the ATS will just sense if there is no power from Inverter it will automatically switch to Grid. Since it has two inputs, Inverter and Grid.
@@minimizeyourgrid Theres no special signal needed yes, it prioitize solar when power comes from both sides, but my ATS (before I modified it) was not able to switch to Solar with no power on grid side. That means when ATS was on grid and a grid outage happend, it was needed to swich manually to solar. But after my modification it works now automatiiiically. Also the solution to slow down the ATS works fine, the ATS now do not switch when battery runs flat and the inverter produces a short interrpt when he internally switch with Relay to grid power. Thats us cause you told that it turns out a slower ATS would be better when the inverter has relay to switch grid to his output. Just replace the 47uF/63V capacitor at small PCB inside ATS with a 1000uF/50V ; )
@@MyDreamsLullabies kung sa charging ng battery meron sya Low DC disconnect na i set mo lang at bulk charging at floating charging depend sa type ng battery automatic na sya mag stop charging pag na reach na nya ang set value.
How do you connect the solar on this Inverter. and will it it charge from solar to the phosphate iron battery.
Hi.Please answerme if this inverter work with 16 S 48v , 320 Ah lifeph4 battery? What comunication protocol have it ,in work with battery ?Anern company seller can,t answer me!! HELP me please
My unit is 24v only. In your inverter specs you should check if it is 24v system or 48v system.
I had a bad experience with the 8,2kW inverter. It broke down after one day of operation at low charge. I had to buy a new 400 dollar power board that broke down after one week of operation. Anern did not meet his warranty obligations and I had to buy an inverter of another brand. I lost à 1000 dollar and hope that Anern will one day deliver me a new and good working inverter. So BE CAREFUL when purchasing Anern material
same thing happened to me.
@@minimizeyourgrid Welcome to the club of decieved clients
@@lucdesmedt7056 I bought one from PowMR the 3200kw and will not charge from Solar 5 days after it broke faulty error 9 going with dispute ali express
Very nice
kamusta sir ung anern? nakabili din ako nagsale sa lazada kaso di ko sure kung ok eh.kakaorder ko palang
Ilang kw ang nabili mo?
Does itis inverter still working?
not anymore, I also tried to purchase motherboard from the seller and the seller said the cost will be like buying a brand new inverter, this inverter is a total waste of money.
@minimizeyourgrid
Hi once again, my previous question is already answered by reading the comments here.
Is the PowMr working fine so far?
And sorry I am newbie, could you please tell how the transfer switch is working? Does he switch to the main grid automatically, when the Inverter switch off and back if the Inverter turns on? Is there a special control connection between transfer switch and inverter or is there a prefered Input (from inverter) at the transfer switch, so he acts automatically?
Does the Inverter never feed into grid, only consume from it as suplement when needed?
Sorry for all the questions, i hope you'll find some time to answer me.
Greetings from Thailand
@@topeye4202 Let me answer to the best of my knowledge... regarding your question "Does he switch to the main grid automatically, when the Inverter switch off and back if the Inverter turns on?" yes it does and also when overload occurs in battery mode.
"Is there a special control connection between transfer switch and inverter or is there a preferred Input (from inverter) at the transfer switch, so he acts automatically? " ...There is no need special control or signal, the ATS will just sense if there is no power from Inverter it will automatically switch to Grid. Since it has two inputs, Inverter and Grid.
@@minimizeyourgrid Theres no special signal needed yes, it prioitize solar when power comes from both sides, but my ATS (before I modified it) was not able to switch to Solar with no power on grid side. That means when ATS was on grid and a grid outage happend, it was needed to swich manually to solar. But after my modification it works now automatiiiically.
Also the solution to slow down the ATS works fine, the ATS now do not switch when battery runs flat and the inverter produces a short interrpt when he internally switch with Relay to grid power. Thats us cause you told that it turns out a slower ATS would be better when the inverter has relay to switch grid to his output. Just replace the 47uF/63V capacitor at small PCB inside ATS with a 1000uF/50V ; )
San mo nabili yang inveter sir?
Sa lazada china sir, pero hindi ko irecommend ito.
Hi sir, natry mo na dis able ung built in ct sensor?
@@rggamat782 walang ct sensor ang offgrid inverter.
kaka bili ko lang din ng sakin sana d ako abuyin ng malas sa item na to mura kasi kumpara sa iba
PD WALA NA AC IN E2 ??PARA D NA MAG CHARGE SA BATTERY USING AC CHARGING??? STHANKS IN ADVANCE
na try ko ng e off ang ac in nito nagwowork pa din sya. so the answer is yes. or set mo lang ang charging source to OSO (solar only).
@@minimizeyourgrid may automatic on and off ba si anern
Let's say 48volt off
50 volt on??? Thanks in advance idol.
@@MyDreamsLullabies You mean in charging? yes there is.
@@MyDreamsLullabies kung sa charging ng battery meron sya Low DC disconnect na i set mo lang at bulk charging at floating charging depend sa type ng battery automatic na sya mag stop charging pag na reach na nya ang set value.