DIY Angled Fence Panel Alteration: Cost £20 / The Carpenter's Daughter
HTML-код
- Опубликовано: 21 авг 2024
- Last weekend, we just beat the frost by installing the rest of our fencing. (Apparently frost creates problems for setting off concrete).
If you want to see how we installed our first lot, then you can watch that video here: • Concrete Fence Post Fe...
And for the remaining fence panels, we chose the following from our local place, Buildland and used the following:
As an Amazon Associate, I earn from qualifying purchases made through links.
2ft lap panels: bit.ly/2hEM4hk
1ft gravel boards: bit.ly/2xMvVKP
5ft concrete posts: bit.ly/2xI9nxd
Gravel: bit.ly/2xHorvd
Post mix
Trenching Shovel: geni.us/ssXAP [Amazon]
Wickes Red Cedar Fence Stain: bit.ly/2khxfm3
But, Buildland don't offer bespoke services to my knowledge about angled fencing and wanted the exact panels. So, I decided to give altering one a go myself as it looked it and it was. The total cost, including trim (excluding of tools) was about £20.
I also bought three pieces from Oakdale fencing (two top spars & top trim): bit.ly/2hhxYix
Tools I Used:
Tenon saw: geni.us/3xlVqB [Amazon]
Black & Decker Jigsaw: geni.us/CmcEa9N [Amazon]
Wickes' Preserver: bit.ly/2jgMcVc
Dewalt Mitre saw (or just use a mitre box and hand saw): geni.us/RMyKab [Amazon]
Bacho saw: geni.us/il7WA [Amazon]
My supervisor's Hi Viz Fluorescent High Visibility Safety Vest (like this one lol) geni.us/mzbjY4A [Amazon]
---------------------------------------------------------------
You can also find me at the following places
🛒Shop in my Etsy Store: www.etsy.com/s...
My Patreon:
/ thecarpentersdaughter
The Carpenter's Daughter Blog:
www.thecarpente...
Instagram:
/ thecarpenters_daughter
My Facebook Page:
/ carpenters-daughter-15...
Pinterest: / carpenterslass
Twitter: / carpenterslass
---------------------------------------------------------------
FOOD:
My Food Channel:
/ tastefullyvikkie
My Food Blog:
www.tastefullyv...
My Food Facebook Page:
/ tastefullyvikkie
Instagram:
/ tastefullyvikkie
Pinterest:
/ tastefullyvik
Twitter:
/ tastefullyvikki
---------------------------------------------------------------
Here's my written version if it helps: thecarpentersdaughter.co.uk/tips-and-tricks/angled-lap-panel-alteration-total-cost-20/
Enjoyed watching this video, Vikkie. I know it was several years ago and you've learnt a lot since, but some simple advice for your viewers to improve the panel stability and ensure long life.
1. If you stagger cutting your battons (one side longer and one side shorter) creating continuous overlapping, the joints be stronger
2. If you drill a hole at the joint and use a bolt and nut with metal washers through, the joints be bullet proof
Was planning on putting a fence on my property and was going to put it 6 feet across till I got to the front, but seeing your 45 degree angle pitch leading to the front part of the fence I think I'll do it your way. Looks good. Thanks for the tip. Oh the fence and you are both easy on the eyes. ;)
hi
first of all brilliant job, explantation and finish very honest and sincere
yes frost or cold weather does effect the chemistry of concrete setting intact it can really weaken the strength and make it crumble !
As does adding too much water
A bit like baking a cake you have to give it the right amount of ingredients and cooking environment - you can additives i.e. frost proofer or similar but again under instructional advisement :)
btw i was a chemist turned builder and contractor
i love working with my hands and love old sKool building techniques but with todays technology
I think your explanations are real easy to follow. I've learnt some really good tips from your vids which will be put to good use. Thanks for posting and I look forward to seeing more of your DIY 👍
Thanks! Glad I'm helping 😍
Exactly! Always treat new cuts with preserver. Good instructions, good video.
And now my family want me to replace our fence panels. Guess what? Out of 5 fence panels, 1 is 30cm less in width (133cm), 2 are 183cm which is OK, another is 186cm so I will need to screw a piece to it, and finally the last one is 50cm wide. It will be an interesting day if it rains. I just hate inheriting other folk's nasty work. Its not as if I can take up the fence posts and set them at the correct spacing as the next-door neighbour had already screwed wood onto the other side of the concrete before we bought the property
This is brilliant Vikkie, I'm thinking of doing that myself as I'll be dropping from 7ft (windbreak for patio door) to 4ft
Forgot to say, you got the cutest quality control manager i have ever seen to !
nice to see that you painted the ends most ppl forget to do this and well done
Very useful. I have put in about 9 fence panels so far (replacements for rotten ones). Next job will be the good few additional ones with massive tree trunks in the way. This was useful in seeing how you can saw the panels, not something I have tried so far.
Treat yourself to a flat type pry/nail bar, and then a folding construction square, add to that a 7/8 tpi 14 inch long tool box panel saw, oh and make a few simple bench hooks for saying free hand with.
I think you've done really well, Vikkie. I'm sure others will have attempted this and made a right pig's ear of the job. :-)
Thanks so much Olly :) I saw absolutely no help online, so thought I'd take a stab at it. But tonight as I drove away from my parents' house, I spotted my their ang;ed panel had a mitred top probably cut at a better angle, but still pleased with how it went. The smile on my neighbours' faces was worth it!
First time viewer. Subscribed. I found your video very interesting. I had to completely redo mine this year after an 80 mile per hour wind. Thanks for your video.
+Al S thanks so much 😊 Hopefully I won't ever have to do it again, but at least I now know it wasn't difficult 😁
Fence definitely looks better the way you did it. Great work!
Cheers :)
Great video Vikkie very informative and easy to follow keep up the good work 👍
Another nice job Vikkie, a tidy looking result... well done :)
Cheers +Dave Scott :) So glad I gave it a go 😉
It really improved the appearance. (Not that is was bad before) Your QC inspector is hard core.
Thanks :) He's a such a bully in the workplace 😂
Nice to see someone who uses common sense. Very nice job !
+august thank you 😀👍
Frost is not much of a problem for setting concrete since an additive can be added to the concrete. Also the materials can be kept in the warmth temporarily. My house looks like a construction zone sometimes.
+T wagner our house is like that at the minute lol. Thanks for the tip- I went out to buy some yesterday as today we've dug trenches to install some path edging. Ive put bubble wrap around it too just in case.
Well done you, not many people would tackle this job.
The tenon saw wasn't a wise choice, I was cringing when you were cutting with it so close to your hand, praying that I wouldn't we a finger drop to the floor 😱.
A pleasing result, you must be well chuffed with yourself.
My Dad hates this saw 😂 I just loved it so much with it being a new purchase at the time. Although can't see myself cutting a finger off with a hand saw.
Nice job Vikki. You might consider Japanese pull saw in place of the tenon saw. I find this is easier to cut with, and control. Subscribed for more!!!
Thanks again! They looked lethal when I googled them haha
CD your a damn breath of fresh air to watch - ignore the comment below from P Orzech - Marry me lol - another great tutorial from a classy lady with dirty hands - my hat is off to you Vickie :)
I'm watching this again as I thought a new video would have been up last Sunday, but I know your a busy girl lately 😀😀😀 but good things come to them that wait!! Glad you don't kneel on bits of wood these days 👍👍👍👍 nice job this though 👏👏👏👏👏👏👏
Haha.. sorry there wasn't a video last week! I just knew i couldn't get it edited in time, but there is one definitely today and a few lined up over the next few weeks
The Carpenter's Daughter haha sorry to push it! Just watched today's. Thanks 😍
Great job. Nice finish to the whole project.
+Rod Peterson thanks 👍😊
Great job, more satisfying to do it yourself than pay for one to be done.
+Kevin Cuthbert yes definitely :) and I learnt something for next time 😀
good job, i used a circular saw and cut the bit i didn't need. then finished off like your fence
That looks great! Brilliant work!
Thank you +Make It Soph :) so glad the neighbours love it too 🙌 Would've been awkward if they didn't 😄
Make It Soph dvdbdgbfb
... good job, beautiful carpenter's daughter
Wow very impressive work indeed! Great video, thanks.
Thanks!
Great again! You might invest in a small compressor and nailguns.
PS, you were a trooper with the back saw (tenon saw) and you need saw horses. 😉🖒
+Ray Larkin haha, when my Dad saw this video, he tried giving me a normal saw and said the one I used looked horrible lol. I thought he'd say good choice 🤣 Yes, a nailgun and compressor is on my wishlist! I used my Dad's at his woodyard last week and it was such a time saver!!
Just noticed your patrion all over that will be subscribing over there later today!
Your neighbor was very brave parking his car inches away from your concrete post locations.
Wow, you are fearless.
Cheers :)
7:41 Your fence alteration lines up with your neighbor's roof line!
So they do!! haha
Keep these videos coming, really great
Thanks! :)
You should get some t-shirts made ..some kind of logo/slogan... I'd buy one because I'm your fan!
Thanks for your videos. I’m doing more stuff around the house. We can do it girls.
Lovely sharing !Awesome Job
Fantastic job, looks great girl, well done to you 👍😉💕💕
Thank you 🤗
Just love your Pommy accent Cheers From Australia.
Very nice job it's not easy cutting those panels because they are so cheaply made well done.
I thought your dog was going to wee against the panel.lol.
Keep up the good work.
Brains and good looks keep going girl.
haha, I thought he was going to too... (I was disappointed when he didn't) 😆 He wees on most things lol
I wish someone made gravel board risers, like a thin length of concrete, to raise the boards up to suit etc.
Brilliant information. Thanks
Well done you!.. its easy to see u have a very practical mind. Just think of all the knowledge ur gaining as u go!.. looks brilliant!.. u want to come up and do a homer in my garden??.. haha... seriously tho, well done!.. 💪🔨📐✏️
Excellent work
Thanks :) :) :)
Great video well done 👍👍
beautiful! looks good
Thanks :)
I heard feet, inches and mills a bit of cross measurements going on. I wasn't sure other ppl then us States used "standard" for measuring. But great build
+dsmmike95 haha, I know! My Dad works in inches, fiance in mm... I need to commit to one 😑 My heart says metric.
The Carpenter's Daughter I don't mind working in metric. The thing I don't like it when people use mm for everything. It's okay to say 4.5cm or 1.45m as you can visualize it easier instead of saying 45mm or 14500mm as I have a hard time visualizing small measurements large.
very nice job, well done
Thanks!
Very nice. November is not the best time to do any staining or painting.
+Kriss Femmpaws thanks and you're right... it really isn't! Shame I don't have a heated workshop 😁
I work as a welder/fabricator, so most of the time the repairs need to be made where the equipment is sitting... working in a quarry that means outside most of the time.
I like you don't have a home shop to work in, much less a heated one. Right now I would like to work on a couple of videos to post here on YT but it's cold and raining outside. It's the fun of living here in the Pacific Northwest this time of year.
Tomorrow is not going to be fun for me... I'll be down in the bowels of an excavator welding up some broken teeth on the units ring gear that swings it side to side... then comes the fun of shaping them so they work... The work is hard on the nails and nail polish but I enjoy doing it and it is very rewarding at the end of the day.
I think you understand... The wow I did that when the job is done. There is something rewarding about having something to show for a days work.
I have friends that are computer nerds and I got them into making stuff outside the computer. They both agree working in CAD is nice but making it with your hands and turning an idea into a 3-d object is much more enjoyable.
I don't have a shed much less a heated one to work in. But that's okay I hope that will change sometime soon. Making something with your hands and having something physical and real to show for your time and effort is very satisfying.
I work as a welder/fabricator in a quarry fixing equipment so the work is hard at times but when the day is over you can have pride it what you have done.
I thought I had replied to you this morning... Oh well not to worry.
Blessings Kriss
I have no idea what you are saying, but I sure do want you to keep on saying it!!
Looks fantastic, yet again, dead impressed! :D
Awwww, thanks!! :) 😘
Nice fence, 2 suggestions1) buy a couple of saw horses, much easier on your lower back2) ger your cheap ass neighbor to split the cost, the newer fence increases his property value as well
+Tug_Slug Thanks, last week I realised sawhorses would be perfect. My Dad said I should make some, so that's one of my next jobs I'll be tackling 😉
Well done
Thanks David :)
Another great video!
looks very neat
Lovely job ❤️
Looks very good... artistic..
Thanks 😀
Very good job, keep up the excellent work.
Personally though, I would have clamped a piece of batton down and ran my circular saw down it. It would have taken 20 seconds to cut
Thanks! Sadly I didn't own a circular saw when I did this :)
@@TheCarpentersDaughterUK I bet you do now?
I wouldn't be without mine
Yes, absolutely :)
well done
Thank you :)
very impressive
Cheers :)
Haha brilliant, love Hans hi viz jacket! 😁
:D Couldn't resist!!!! lol
Looks good to me.....
Aww, thanks! :)
Great job...
Thanks 😀
not knocking you in any way
i personally would have put a straight edge where you wanted the angle then cut it with a saw then pissed about after
I love closeboard panels for this job and not wany like you have to struggle with
Same here. Offset straight edge for thickness of top baton/trim and one cut straight through does the job.
I've been loving your uploads, another great job here. Although your dog voice over needs work :)
hahaha, definitely need to work on that!!! 😂 And glad you're enjoying them 😀
Nice work.
Thank you Andy :) Nice Celtic style spoon btw ;)
Thank you!!
oh no you never changed your mind,,,your a chippies daughter for sure all them saws ,measurements,id of sawn it off where it was,,maybe thats why i aint a chippie and a mere hoddy,being as you were sacked for missing a bit,you can have the start,monday 6.30 am as long as you got your hat boots and green jacket,cscs card.,,na but good work worth it at the end of the day,,dont you want a gate to keep spot[ the dog] in,,,a kennel also ,but you may change your mind and do summat else to the fence,well done !!go steady up them ladders looked a bit iffy. cheers
I was hoping it would be as simple as sawing it all off the top, but then I realised they weren't the same on either side. And one mistake and I may have had to buy a new fence panel :( Yes, I'm desperate for new steps - they have a crack in them lol
Great job! Looks smart ;)
Thanks Shaun! :)
I don't understand why that type of fencing isn't in the u.s. it's easy (But heavy) to install and lasts years.
Yes, same here! It's so sturdy!
@@TheCarpentersDaughterUK,sorry to tell you that your waney lap panels are the worst type of fencing. Ask any fence contractor, the americans wouldn't buy them, that's why they aren't made there.
Great Job :) keep up the good work :)
Thank you :)
👌👌👌
😂👍 you would have been safe with the jigsaw, love.
+kodiak wild just incase it rained again. I was using an extension lead and it was still rather wet outside.
great dog
Amazing cool Lady
all i can say is the neighbor is brave leaving they car there all the time
Does your quality inspector have four legs and wear the same coat every day?
It definitely is “posher”
Glad you think so +Dave Williams. It better not break if we have some nasty wind or I'll be having words with it!!!! 😂
Nice job!!!
Thank you so much 😀
Dove tail saw
Thanks +John Mcghee... after my Dad watched this, he offered me one of his saws and said the one I used was a horrible lol
Tenon saw, climb back into the box, Mr mcgee
Easy on the eye , the fence or you ? 😉 Good video
+Pauly H 😄
Looks really good ! Do you live on a main road lol
Lol and thanks :)
It’s not that bad as her house is quite far away.
What a beauty 😏👍
You're so cool.
Thanks 😄
Guy's, your all put to shame!!
A carpenters daughter should have a pencil behind her ear......🤣
Sometimes... and sometimes in my hair lol
great job yet again loving the furry quality inspector btw ;) lol
+Richard Jones thank you :) I'll pass the message on 😄😉
but that cloud burst wow you must have got soaked
Yes, it did lol. Similar to the one when I did my patio... I'm cursed! :(
yeah I did notice incredible rain
я вас люблю
you want to come round my pad and do some jobs . only a drive , bathroom and kitchen . tile floor though out downstairs . electrical work . if your about for about 3 months LOL
Haha - nice try 🤣🤣
Chippies daughter?
Z
Kind of woman to look good in both a party dress or dirty work clothes
😂
Wow a woman whith no fear from tools,please mary me😈😈😈😈
+P Orzech 🤣
Unfortunately Mate she is engaged :(. but I am with you there. A women who likes tools :)
I'm not jealous ,if the other dont marry this wonderfull women i do it :)