MERCEDES W163 IGNITION COIL REPLACEMENT ML320 ML430 ML500 ML350

Поделиться
HTML-код
  • Опубликовано: 31 дек 2016
  • MERCEDES W163 IGNITION COIL REPLACEMENT ML320 ML430 ML500 ML350
    ►Check Out Our Website: mechaniclifestyle.com
    Hey guys, in this video we will show you how to replace or remove Ignition Coil on Mercedes W163 ML Class from 1998 to 2005. We demonstrated how to replace ignition coil on a 2001 Mercedes ML320. If you have a code such us P0351, P0352, P0353, P0354, P0355, P0356 , P0357, P0358. The last digits corresponds to the cylinder number. It is very likely that you have a bad ignition coil or bad wire that goes to the ignition coil
    This might be helpful on:
    1998 Mercedes W163 Ignition Coil Replacement ML320 ML430 ML350 ML500 ML230 ML270 ML400
    1999 Mercedes W163 Ignition Coil Replacement ML320 ML430 ML350 ML500 ML230 ML270 ML400
    2000 Mercedes W163 Ignition Coil Replacement ML320 ML430 ML350 ML500 ML230 ML270 ML400
    2001 Mercedes W163 Ignition Coil Replacement ML320 ML430 ML350 ML500 ML230 ML270 ML400
    2002 Mercedes W163 Ignition Coil Replacement ML320 ML430 ML350 ML500 ML230 ML270 ML400
    2003 Mercedes W163 Ignition Coil Replacement ML320 ML430 ML350 ML500 ML230 ML270 ML400
    2004 Mercedes W163 Ignition Coil Replacement ML320 ML430 ML350 ML500 ML230 ML270 ML400
    2005 Mercedes W163 Ignition Coil Replacement ML320 ML430 ML350 ML500 ML230 ML270 ML400
    ► OUR MAIN CHANNEL: bit.ly/2ad33QG
    ► 2013 GT86 Project Playlist: bit.ly/2dz4xY1
    ► 2015 Ford Fiesta ST BUILD Playlist: bit.ly/2a59UKp
    ♦♦♦ Cameras & Gear Used For This Video ♦♦♦
    •Camera
    Panasonic Lumix FZ300 amzn.to/2BNWtNA
    •Tripod
    Polaroid 72-inch amzn.to/2iVTmP4
    •Microphone
    Polaroid Pro Video Condenser amzn.to/2krpSsA
    •Light
    NEEWER 160 LED CN-160 Dimmable amzn.to/2jjg9Bd
    •Computer for editing
    Lenovo ideapad 310 amzn.to/2kqUNFl
    ♦♦♦ Other Equipment and Gear that I use ♦♦♦
    •Second Camera
    Sony HD Video Recording HDRCX405 amzn.to/2jk8nqB
    •GoPro HERO5 Black amzn.to/2ktNKfj
    •Extra Computer For Editing
    Lenovo Ideapad 510 amzn.to/2ktOuB7
    This is NOT a sponsored video. Everything is purchased by us!
    ► Instagram: / worldmechanics
    ► Like Us on FACEBOOK: / worldmechanicsofficial...
    ► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
    AMAZON ASSOCIATES DISCLOSURE
    Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
    *Disclaimer
    We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
  • Авто/МотоАвто/Мото

Комментарии • 31

  • @AutoRepairGuys
    @AutoRepairGuys  6 лет назад

    ⛐ Check out our Garage to see what tools we use and recommend:
    www.amazon.com/shop/worldmechanics
    ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
    ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

    • @igustisatya3802
      @igustisatya3802 4 года назад

      I have a problem with my 2002 ml500. It just does not crank and start but when turned the key on position all the dash lights were on. What could it be? It happened after I pinched the purple wire while replacing the motor mount.

  • @lawrencewnef0307
    @lawrencewnef0307 2 года назад +2

    You guys are OUTSTANDING! Thank you for all of your help. Please tell the silent mechanic that I'm grateful for his hard work. Salute brothers!

  • @paulacatalan2521
    @paulacatalan2521 5 месяцев назад

    I love u 😘😘 thank u daddy. I didn't know what back look like so I click ur video .. before ur video I thought the Bak n front were two different coils haha but it's just one back n front lol 😅

  • @vincenteijbergen460
    @vincenteijbergen460 7 лет назад +2

    Please do Spark plug replacement and ball joints!

  • @dwaynewarren8908
    @dwaynewarren8908 2 года назад

    It works I just changed 3 igniton coil

  • @cuurel
    @cuurel 3 года назад

    Nice, thanks for the tips G

  • @craigkeller
    @craigkeller 5 лет назад

    Great video ‘s gang!

  • @tasteycaramel1
    @tasteycaramel1 7 лет назад +1

    please make a video on how to replace key cylinder

  • @mckinleysmith07
    @mckinleysmith07 3 года назад

    I bought some coils from Amazon and I noticed how these doint have the letters on them like the original coils do. Can I still install these

  • @christopherb4137
    @christopherb4137 6 лет назад +1

    Ml320 won't start it makes a clicking noise replaced the starter checked battery it cool was going to check alternated don't know what else it could be

  • @uriel4377
    @uriel4377 4 года назад

    on some320ml `s torx bits it takes a t-27 and guess on this one it takes a t-30.

  • @logic45audio
    @logic45audio 2 года назад

    Well you did show how to take one off and put another one on but you picked the easy one.
    How about doing a video of the back side on the passenger side and show us how you wiggle around and what extension do you have to use to make it work because I have a feeling the back window on the passenger side is not going to be the same as the one you did as far as easy.

  • @210gremlin
    @210gremlin 5 лет назад +1

    I can’t get the spark plug wires off of the coil. Do you have any tips for extremely stuck coils?

    • @georgem4309
      @georgem4309 4 года назад

      I've been a used car dealer for 33 years. These Benz plug wires are an absolute BITCH to remove from the coil or the plug. Try a spray lubricant inside the boot of the coil wire and shake it from side to side. Be patient ! The Benz dealers just cut the wires and put new ones on. Many others are in the same situation as you. Pain in the ass. Good video nonetheless. Very helpful money saver.

    • @donwilliams495
      @donwilliams495 3 года назад +1

      There is a classic 17mm open end wrench that is shaped to remove the boot.

  • @chrisbates2603
    @chrisbates2603 4 года назад

    How you can tell if ignition coil bad

  • @0x00zero
    @0x00zero 4 года назад +1

    You forgot to mention that these coils come with two (at least) different connectors. Some have 'wide' metal pins and the others have 'narrow' pins. If you get a wide one, just dremel it out while cursing in German. There's probably no difference between the coils except for the pins (to mess with MB customers and make sure that they can't ever DIY and must keep paying maximum parts price.)

  • @0x00zero
    @0x00zero 6 лет назад

    I got some junkyad coils and the pins in them were wider than the ones in the '02 I was working on. super maddening. I ground them down with a dremel tool so they could plug in. They work fine. Why change the connector? Bosch has proven they can update the parts over the years and manage the systems without such silly games. never get a german car.

  • @christopherb4137
    @christopherb4137 6 лет назад

    How do you know if the ignition cool is bad

    • @nolund3269
      @nolund3269 6 лет назад +3

      Take off the plastic cover over the engine. Start the engine. Take out one in a time Electric plug on eatch coil.If the rpm drop a little the coil is good. If the engine not drop in rpm the coil is bad.

  • @Bais47
    @Bais47 Год назад

    You need to change cover gasket on left hand

  • @tasteycaramel1
    @tasteycaramel1 7 лет назад +1

    my bad its called a steering column lock Lol

  • @edwincardona9974
    @edwincardona9974 7 лет назад

    2001 Mercedes ml430 turns on fine, then about 15min. Later it shuts off, then won't turn over, then about an hour later it turns on and repeats the same sequence. Any possible solution to problem???

    • @johnjames3369
      @johnjames3369 6 лет назад +4

      You should replace the crank position sensor. The sensor will get hot and cutoff then cool down and work again til it gets hot.

  • @2successbeyond918
    @2successbeyond918 5 лет назад +1

    What is the exact firing order

  • @Ravenola
    @Ravenola 2 года назад

    I replaced head gaskets without removing air filter box. No need to remove that.

    • @Ravenola
      @Ravenola Месяц назад

      @PEMDASbaby I was not in a hurry, so took my time, did everything thoroughly, so roughly about 3 hours, with detail cleaning each head.

  • @billyidol2342
    @billyidol2342 5 лет назад +1

    the moroccant butcher shop

  • @tasteycaramel1
    @tasteycaramel1 7 лет назад

    how to replace a steering power block

  • @alfredhuertas4295
    @alfredhuertas4295 6 лет назад

    Good morning Can you help with this matter on our MB ML320 1998?
    Please advise
    MB of Puerto Rico tells us that metal blade key are not available. They are suggesting we change the whole ignition and computer system at a cost of over $4,000 on a vehicle that is worth half of that.
    We had a metal blade key ( what they call Mickey mouse) since it does not have the beeper portion and it got de-synchronized somehow.
    Please advise what i can do.
    This is our daughters car to move around in College and it is difficult to spend $4k or by another car.
    Typically this metal blade key costless than $100 all included.
    I can forward you the licence info to help us get one of this metal blade key
    As instructed by our Mercedes mechanic ( witch is authorized / certified by MB to do all this) he is requesting a replacement ( not a new one) metal key for the #4 key on this vehicle. He will program it as it is required,