Mini Jet Boat Build Part 4: Fully Installing the Supercharged ROTAX Engines!! (Major Progress)
HTML-код
- Опубликовано: 12 сен 2024
- Boy the Jet Boats are looking AWESOME!!! Soon we will be jumping them!
Hot off the press CLEETUS SHIRTS!!! Grab yours here - www.cleetusmcf...
Our 2021 Sponsors:
www.holley.com
texas-speed.com
www.motionrace...
www.nittotire.com
www.summitraci...
heatwavevisual...
Check out our schedule for 2020 here - www.cleetusmcf...
Cleetus2 Channel - goo.gl/Ph2wyo
Holley's channel - / @placesholleypoops9094
**Social Media:
Instagram - goo.gl/LZvy5e
Facebook - goo.gl/gdwhh1
**SEND ME FAN MAIL... (bald eagles welcome)
Cleetus McFarland
12961 44th St N. Ste B
Clearwater, FL 33762
United States of AmericaThe first time we've ever been pulled over in either of these cars...
CLEETER T-SHIRTS!!!!! Grab yours here - www.cleetusmcf...
I see VISE GRIPS!
A guy just loves it when his favorite RUclipsr watches the same stuff
Lmao love the content vice
@@durkj3370 🤘
@@genesisaltitudes1139 Thanks man, appreciate it!
The forgotten Chevy s10 video was great! When will you do same kind of a video?
“ its a little brisk for us Floridians today its like 50 degree today” must be nice
“It’s freezing!”
Me: laughs in Michigan
Dumped 10 inches of snow here in 9 hours so far
Yeah no kidding -15° C here today -22 with wind chill
Shit I got it easy its only 36 in Oregon 🤣@@HAKAMALAKADEEKYDODA
@@jbro507 Laughs in Wisconsin
There’s enough room for an LS in those boats, how was this opportunity overlooked?
wayyy too heavy for such a small boat, also there is more stuff to go into that area.
Think thats what everyone was expecting lol. But these are fine
An LS, even with turbo's will probably have less power to weight that that thing, those marine engines are made with "limitless" cooling in mind, so it's got crazy power for it's size, and it weighs almost nothing
Higher revs on a jet boat is more important than power. I have bigger jet boat with a 3lt V6 engine but I'm looking to put a gearbox to up the jet revs for more speed.
You can make out those rotax a ton of bald eagle, at least 300 hp turbo or supercharged with the right tuning, thats like 500 hp in a LS, just wait for it,
This dude just said "Its not like your going to go top end these things"
He must be new around here
@@That-Guy.
Ya think ?? Hahaha
😂🤣😂 he's definitely going wide open first time.
You are not gaining a lot on 2strokes with new heads🤣
So glad you guys connected with JP Racing, every single ski he touches is a certified RIPPER!
✅
Absolutely
Oh man, that engine is a lot tinier than it looked inside the Jetskies
haha right, when you think about it, that motor is literally between your legs riding a jetski, they really arnt big
If it’s the motor I think it is, it’s only 900cc or 1300cc
@@braaapattack2937 These are 1600cc, the sparks have the smaller engines.
@@GTROLA ah, I know the sparks are 900’s as the same motor is used in their snowmobiles
That thing is going to be FUN.
300hp, 300lbs. #ITLLEAT lol
You know they will line them up for a race ...
Those suicide boats are kinda worrisome to me. Don't want my favourite mulletboy (Cleetus) and cowboy (James) to hurt themselves.
Hey cleet what you did for that boy Luke warmed my heart brother....👍👍 Awesome man
I actually started too cry, a 55 year old man. That was great GARRET, TOUCHED ME DEEPLY.
You guys should make a shirt that says, "Tall & Taal: Speed and Marine" lol
YES!!!!!!!!!!!!!!!!!!!!!
I get the Tall and Taal part of it but you lost me with Speed and marine I don't get the joke????
"Taal and Taller Racing"
@@Nigel_THFC I mean...a speed and marine shop...like...fast cars and fast boats, kinda like Finnegan has I think his is called "Finnegan's speed and marine" only joke is the tall and taal part and have a pic of a giraffe in a boat or something lol
I would like this comment but it's at 69 so I can't
I thought when you said porting a wild Jeremy would appear
Lol, yeah, poking his fingers in every orifice he can find.
"Long as it smoothly goes in and out"
James: *chuckles*
*camera cuts*
I just want to know what was said after the cut 🤔
I bet $20 it was "That's what she said"
Just some dirty...greasy things
Awesome to see Cleet is sweet on the Canuck go-fast equipment...BRP/Can-am rips and southern boys now know what Canadian folk have known for years!
You know what they say: The bigger the glob, the better the job.
That’s what she said!
Sounds like an AVE quote
@@maibemiles3904 What, a higher chance of success? XP
DEWCLAWW!!
I have that hoodie 🤣 AvE is my favorite RUclipsr
man i love the bond between cleet and james they might as well be brothers at this point
James Bond
Does that guy know who he’s talking too “its not like your gonna top end these things“ lmfaooo🤣😂
Might not be a way to top end them. I know Jack about jet ski engines though
SIKAFLEX!!! 🥰 As a career marine repair tech, I’ve shot a buncha tubes of that stuff! When you do decide to pull that thing back apart, you’ll bend the flange all to heck if you try to manhandle or pry it off. The trick is heat, Sika softens and breaks down under heat. 💪 stuff is freakin bulletproof otherwise!
Finnigan must look at this boat engine install and think it's the cutest little thing
Only Cleetus could have this intro man... No one else could ever have an intro as good as this.... No one else could ever say the exact same thing either .... "You're on the --- ----- RUclips channel." .... Doesn't matter what you put in there, none no never how, nothing will work.
Your sealant laying skills are that of my own. Lots is more betta
Lol James, “you can put nitrous on anything”
Fastest thing ever down the 1/4 mile is a peroxide powered rocket dragster (3.58s@386.26mph) Can't put nitrous on that and nothing with nitrous will ever touch it.
I mean you could, nitrous is a wonderful oxidizer and has been used as the oxidizer* in rocket propelents blends before.
@@MrDJAK777 it's hydrogen-per-oxide. There is already one oxygen per hydrogen. What's that oxidizer going to do when the fuel is already an oxidizer?
@@lastnamefirstname9043 It may not help, but you could still put it on there.
@@lastnamefirstname9043 just make a rocket with nitrous as the oxidizer instead of peroxide
You’ll have that on these big jobs lol. sounds like a union man.
Haha! Came straight to the comments, knew I’d see this down here. IBEW 613 ✊
Some techs @ Mercury Marine used to use a small wooden roller (used for wallpaper) and a cardboard pad to coat the roller. Then they would lay down a uniform coat of RTV on the joint to spread the RTV uniformly with little overage. Super clean gaskets and totally filled.
you gotta get over here to South Australia and check out the Dinghy derby, you guys would love it.
Loveday South Australia 🇦🇺 in da house Yee Yee
@@shannonspear8751 Loveday, woohoo, used to be an annual for me just up the road at Cobby I used to stay. love the riverland region, my father grew up on the Murray.
@@electricdeckhead3083 could you imagine Cletus the Giraffe 🦒 squished up in a dingy derby Tinny lol or would he be the swing man hanging off the front
@@shannonspear8751 it would be a sight to see, I would swing for him.................. hang on that sounded a bit gay.
@@electricdeckhead3083 yes I know him what’s his name again that’s it Acoustic Deckhead lol
Even tho we are on different sides of the country I am going to meet you and the crew some time next year. 2020 sucked and made my depression and anxiety much worse. You're channel and the hoonagain channel brought me joy in my cell of a bedroom. Hell yeah brother till we meet.
Don’t let this distract you from the fact that Hector is going to be running three Honda civics with spoon engines, and on top of that, he just went into Harry’s and bought three t66 turbos with nos, and a motec exhaust system.
You watch too much movies mate^^
I dont even know what movies are... i just know that Hector is preparing for something.
@@GodlikeIridium you ruined the joke mate
Have you ever seen the 400HP inline 4 diesels used in Thai race boats? They compound turbo the Isuzu truck engines after adding a few upgrades. Bigger injectors, bigger turbos, ported heads and intake. Those little boats freaking fly!
"we got Chris Angel and JP" [M I N D F R E A K]
I’m so happy someone else had this thought
I was waiting for it haha
the Unser's had everything, hot rodded, snow mobiles jet ski's, used to watch Bobby wax them at 7flags Albuquerque , open modified, the trick little detail on his car, mud screens, drivers set up, of coarse its only your tires or the lap car throwing the mud back in the 80's, keep on cleet'n
The more I look at these boats, the more I want to build one.
I recommend you guys put two Rule (or other quality brand) bilge pumps in there ideally 3000 Gallons per hour+ hooked up to a separate battery.
Because the jet boats don't have any buoyancy in the actual hull, once enough water gets inside you sink. So you want any water out of there ASAP.
You want to mount one down low in the middle of the bilge at the stern/back of the boat and another higher up, that way only one turns on for small amounts and if you get loads in then the other kicks in
If you're gonna be driving those boats like you drive your cars then you'll be getting loads of water inside 🤣
Loving the boat content 🤙🏻
That's funny I just watched the video of JP racing doing the jet skis for you guys good stuff keep up the good work I love when all the RUclipsrs get together fun times
JP in the house 🥵 if u know u know the king of jet ski
“It’s like 50”
Bruh it’s like 20 something up here in Minneapolis
Here in commiefornia it was 62 at night and 84 daytime a few days ago
Lol I’m from south Florida leaving to go up to Minneapolis in two days 😂 gonna suck
it was 46 this morning here in florida. time to remote start the car and put a jacket on! the problem with Florida is it will break 100 in the summer so yea
Bro today is super nice up here in washington 45 where im at
@@haydenwiseman3056 thats texas lol our fall is basically summer and winter mixed 40° at night 90° during the day then summer hits and its 105° with 95% humidity lol
love it... cut the hull of the ski up, way easier to remove. Also on my jetboat I extended the delta and the side plates past the transom. Adds more length and reduces wetted surface to increase speed... dont know if u need more speed with those beast of a motor, also works as a bottom brace to install a swim step that doubles as a pump protector. One other brilliant Idea I got from
moto jet is align the stringers to add thickness inside the hull...when holes are drilled the are tapped into the stringer and eliminates through hole. eliminates a bunch of holes drilled through the boat.
Your powerplant chose is on point and your wind shield is way sick....should of done that with mine. CANT WAIT TO SEE THE TEST!!!!!
Can't wait for these to rip on the water for 5 minutes and then sink
Lol maybe not
What a loser.... What bridge do you live under?
The one thing everybody wishes to get rid of on a seadoo is the carbon seal and they put them on these boats 🤦♂️
I'm a city fellow from Los Angeles California can you explain this please I've seen it all in the comments
We here in the north coast in Canada have been enjoying finding a niche for ease of entry into 2 stage pump jet boating and making it approachable to a larger audience. My friend along with the local boating community has launched his first model for the watercraft community. The system works with 2 OEM seadoo pumps mainly the supercharged models and lets you link them together for a 2 stage system helping reduce cavitation and helps boaters navigate area with more water debris with increased performance.
"Munster Canada" can be found online...
Again it was very hard to decide whether to post this here but I see the passion Andrew has for his products and we are embarking on further explorations of finding innovative solutions for performance boats that comes back and support enthusiasts in our community.
It is a great project for an enthusiast...
Thanks for your open ears
Jp for the win and if you haven’t seen monstermax #2 Cody is a mad man 😂
Impeller cone is a must! If not u will be taking it apart after 1st use. Splines will go dry instantly.
Same with alinement and driveshaft length. Just saying....
SBT is a great source of wealth, u did after all buy the tools from them.
"you went X-Games mode on that finesse" ol' jack stand Jimmy's got jokes 😂
This whole time I thought they were putting both engines in one boat. Can't say I'm not disappointed.
James is rocking his Fargo winter ensemble lol
thats pretty much the exact same outfit I wore today with the addition of a dickies vest! (I live in Fargo)
I don't know the first thing about Jetskis and yet I recognize these dudes, clearly they are doing something right 😂
If only McFarland fabrication was around for the titanic build it probably still be afloat
Doubt that iceberg would give two phucks
Titanic sank because they packed the haul full of explosives. Set it when they rammed the iceberg.
i wonder if they woulda LS swapped them boilers and had Jack and Rose off the back in an inner tube or set of skis?
Those boats are gonna be sick. Not gonna lie a little jelious. As a boat guy those things are made for anything.
Hell yeah
I got a 97 skidoo 583 and that things a tank, the rotax engines are indestructible in general for a lot of skidoo engines 💯💯
Holy crap that's a lot of goop! LOL.
Can't wait to see those babies rocking it on the water......Mini jet boats sure look like a lot of fun.
Video 12 of asking cleeter to do driving underwater part 4
Here for it
I want it too.
But it ain't happening any time soon. As Cleet said on the livestream, the engine is the tracker is completely junk, seized up from all the water in it. He said they want to put a diesel in it, but with how much is going on it just a low priority thing.
@@philb5593 yeah I'm just here to make sure it doesn't stay on the backburner forever
@@triggeredhondaboy8648 feel you
Shoutout to JP racing for making sure everything is done right yee yee👍👍👍
James: 😏 “You can put nitrous on anything” 🤣😂
4:56 lol, explains how sensitive carbon seals are...while slapping the carbon seal together
They need two engines in there. Three for extra measure.
Just remember there going to giving it upgrades
Hell yeah brother! You can practice race these on the crew 2. With a steering wheel setup. Things just turn and go. Better than a gokart
Next month on the Cleetus McFarland RUclips channel: “Putting a built Texas Speed 427 in my jet boat!! TWIN TURBSKIES”
It would be like a miniature version of Finnegan's drag boat
We can only hope
@@Whitehorsewelding that is definitely true and would be very cool
After years of working on over engineered import cars with motors shoehorned into tiny spaces, the chance to work in that engine bay would be a dream!
Sounds like my daughter, what's that do, what's this, what's that? 😂 Honestly have no idea what I'm looking at
When glue things like that together I drop O rings in the sealant to make sure ach don't push all the Sealant out.
AWSOME!!!
50 something is shorts and short sleeve weather for me.
You must be from Ohio also, lol!
@@Hoaxer51 Same here.
It hits different with low altitude and high humidity. So much more air to suck the heat off you. It chills you to the bone much easier.
@@Hoaxer51 massachusetts
Just got my frreedom construction bundle and brother i gotta say, best purchase anyone could make and i dont think i can see myself without a mullet anymore
00:25 when you said Chris Angel. I thought the magician was going to pop out and instantly remove the engine, with glitter.
Glad I'm not the only one thrown off by that...
Damn, what a process!!!
Nothing like smashing mechanical seal faces together. 😂🤣
Came here for that. Tell that guy if he knew how to treat a mechanical seal they wouldn't leak.
that cheap ass stainless stationary is hilarious.....need some silicon carbide/silicon carbide to deal with sand and silt crossing the faces. Its a shame the manufacturer used a 20 dollar seal with rubber bellows for the pump, of which they probably want 300 bucks for lol. Stainless potentially in sea water? lawl
Ooohhh snap JP in the house!! Noiceeee
Damn I didn’t know Chris Angel worked on engines
Wow yo! Its been a steady mid 30s n windy af. Straight brisk. Good to see you committing to the waterlife a bit more. Excellent content man
"Its freezing in here!" **Laughs in Canadian**
I would LOVE LOVE LOVE to see you guys do a locost 7 build-off!!!!!!!!! These slightly different builds are so awesome!!!
One of that boat should have been "K" swapped!!! xD
Just wait for Kyle to come thru
Wrong channel
@@JustAPatriot23 Reason?
I find it awesome that you never really need to go anywhere anymore for fab or anything wish I could be on that level
I can tell you weren’t a birthday cake decorator in a past life 🇺🇸
I’m ready to see these on the water 🇺🇸
"It's a little brisk out, like 50 degrees or something"
*laughs in Washingtonian*
Hears you laughing in Washington
*laughs in Saskatchewan
okc 306 alright you got a point
Laughing in Scandinavian.
Laughing in Seattle
Cleet brother go back to Idaho those were the coolest freaking videos. My heart was racing just watching hahah love you guys
Not gonna lie I was expecting these to be K Swapped.. But this set up looks good..
This is faster, these engines are "water cooled" so they're much lighter, like when are you ever gonna run these on land when they ain't going nowhere XD
What makes you think they're "finished" with this project? I'm expecting to see a turbo-supercharged K-Swap with NOS before they're done playing with the Jet-Boats!
Wrong channel. LSX
@@JustAPatriot23 I'm sure they'd like to cram an LS in there but not sure they could squeeze one in. Jeremy's an LS guy from way back and he's lovin that Kater-Tot of his!
So glad you got hooked up with JP- gonna really turn those things into certified rippers!
I think your right to moan about it being cold is revoked when you are wearing shorts
Cleetus come see me at Riva motorsports when you want this job done right, there’s a reason why we are number 1 in water craft performance.
0:25 he said Chris Angel, I was like are these boats gonna fly, walk a highwire or turn into submarines...
im 19 i worked at marina since i was 16, going to a tech school now its cool seeing this haha used to do stuff sorta like this all the time
When’s the race against Finnegan’s Game Over
Super cool to see JP Racing helpin the boys out!
I was looking for the "you're doing it wrong" comments but I guess I'm too early
7:53 "As long as it's going in and out" plus that footage xD
Y’all need a bigger shop
This is my favorite series you guys have done
Those engines are so small I'd find a way to put one in a go-kart if I could.
It's hard to explain but those engines wouldn't last 5 mins in a go-cart because they are built to go fast in water so if you put it in a cart the engine would not be able to handle the
@@Nigel_THFC please explain? As I can't think of any viable reason 🤣
@@garyhowe88 He has no idea, They weren't even built as a marine specific engines as Rotax builds engines for all types of stuff
Idea for the freedom factory and its drainage problems.. The F.F sprint boat course. 1 foot of water through out the course is all that's needed for these jets to run
Anyone who knows about carbon seals had to cringe when he was touching the seal with his bare fingers 💀😂😳
I don't know anything about them but the way he clack them together kinda made me cringe
from the way he was talking about the scratches leading to cracks, i bet they replace them before the final install of the engine.
I dont know anything about carbon seals but the way he called them crack made me clench
What does touching a carbon seal with your bare hands do to them?
The oils from your hands aren't good for the carbon seals, it can cause pre-mature failure. Best to use rubber gloves and coat them with dishsoap before install.
flash the ecm with a stage 3 tune, bigger injectors, upgraded supercharger impeller, cold air intake system, one range colder spark plug, stainless wear ring, get it in the water and see what happens at top end as you will need a different impeller in the pump. by the way, even a chip in the wear ring will cause cavitation and will melt a wear ring fast.
3 Views, 142 likes, 0 dislikes. Hell Yeah Brother
the jet boats are going to be sick in action!
Did this guy really just say “it’s not like your gonna go out and top end these” to cleetus lmao I disagree
First time out it'll be fully sent
@@rtx447 that’s what Im saying man
I’ve been driving Rotax for two decades, very cool to see you guys finally playing with one. Still really want to see you guys do a snowmobile.
"go a little counterclockwise" okay YEET
Instal a diving oxygen tank or some kind of high pressure air tank and instal some airbags under the gunnels on the sides and one big bag in the front so if you do sink you can pull a parachute type lever it opens the bottle fills the bags keeps your boat on the surface even if it does try to sink then can be towed to a sandbar
Not a bad idea heck use n2o lol.
@@timothythomas1737 figured its cheap insurance a nitrous bottle is probably the way to go just for cool factor
10k views in 9 minutes wth
Cleetus!!! Read this. You should tie in two or more braces for the transom of the boat. I build boats. There can be twisting from the torque and bend the shaft.
People commenting before they even watch the video 😂
Jetstream is just outside of Vancouver BC, they know how to build boats👍🏼